Reviews
Parenthesis better!
It was a challenge to install, but I'm happy with the way it looks
Because it is a little thicker than the OEM Product, the hose band is just barely there
To lock the Band to fix the Engine side of the long Hose
It was fiddly
A slightly longer Band will make it easier to prepare a slightly longer Band
View detail
Size is perfect
Wiring Oil Filler Cap and Oil drain bolt, Oil I used it for wiring the filter, and I was satisfied with it because I could install it in the M6 bolt I polished it with PIKAL to make it beautiful But I have to cut it and remove the BALI to make it look good Let's do it View detail
The appearance of Parenthesis goodness up? The price is a little high
I installed this on a 2014 WR250R
Simply remove and install the OEM and dress-up
The capacity of the radiator cap has been increased from 1.1 to 1.6 so that it can be used on the Attack system forest road It's safe
View detail
Fits: KAWASAKI KX125, SUZUKI RM125, YAMAHA YZ125, YAMAHA WR250Z, YAMAHA WR250Z, HONDA CR125
Quantity : Because Cospar is good as it is Set.
I bought it to take 3MA setting.
Anyway it is cheaper than other companies and it will be saved.
Even though it is cheap, accuracy is not bad either.
View detail
It's luxurious.
It's a bit disappointing because there is only one color I want blue or black, but I couldn't choose, so I bought the red one. The product is satisfactory. I only want one blue color or black color. I did not want to buy it because I could not choose it. I bought it because it was cut to the right size. It is very satisfactory because it is just bolt on. The product is satisfactory.(translated by Google Translator) View detail
Good vibes
One of the Parts I thought about replacing LLC.
As for installation, we only need to replace with OEM Product so we did not need processing.
As in other impressions, Band behind the Engine was quite a difficult enemy, but I was able to work with Ratchet using Universal joint and extension.
The point is whether it depends on the tool?
Hose is thick, so the Hose Band also does not reach the water pump part at Size 25 of the OEM, exchange it for the Size 32 of the Stainless and worry.
It is satisfying because I think that I've improved my appearance much better.
But, I guess it will not be a little cheaper.
View detail
When it fades, you can set it as a guide for replacement ○
Three years after installing it faded Red became Pink like red ham
Exchange along with waist OH.
There is a hang to tighten the Thermostat side Band, even a beginner can exchange it.
Just regularly check tightening again (There is no guarantee that it will not leak because it is Silicon)
If you worry about leakage OEM Rubber is safe.
View detail
For Wiring fixed it!
Drain bolt relationship of KTM RC 390 is numerous and there are not suitable places inevitably so purchase. I missed some BALI and gave it a File
Almost good.
View detail
Use other than Wiring
In using suspicious fuel consumption UPItems put in Fuel Tank, it will be impossible to take out as it is, so I purchased WirePlate to connect with Tank cap and Wire
It looks like a plastic model with RUNNER 125 as Base and 3 Plates are lined up, which is slightly different from the picture of product description. It separates and gates trace File, but Material : Stainless Steel so hard
In order to tighten the Screw of the Tank cap to the 2 mm hole which originally passed the wire, it was expanded to 3 mm with Drill and Wire was passed through the hole for the Bolt on the other side. Plate was straight, ready with Pliers pinching pinch angle
Even if the Bolt hole and the Wire hole were reversed, they could be fixed without any problems, and the appearance was finished in good looks. However, Plate 1 pc. Although the price is cheap but it does not run Circuit, I feel that I did not need 3 in a calm way ( - ω - `)
View detail
There is no particular dissatisfaction in terms of quality and performance.
We replaced Fuel hose to attach Filter with Big tank installation.
Hose is also flexible and Size was also Exactly.
View detail
Good stuff
Received the item with well packed by webike! nice. Purchased this for my MT09. & it Helps abit with the temperature issue that i had since last week. View detail
very good
I used it for CRM 250 rm. Since the product is only 96 years, it can not be helped ‥. Left Side Only the radiator's Hose is short and rm (1991) It did not suit. It is impossible to walk around! It is possible to wear it sparingly, but because it feels loose, pressure leaks if you do not tighten the band securely. The next morning the jiwi waga drooped (Lol) I wanted the slender Hose at the top to be set as well. View detail
As expected
There are products that use One-Way Valve for these kinds of goods,
In One way, the expanded air inside the tank is not easily discharged and the internal pressure does not decrease.
In comparison, this product knows by blowing Hose slowly in the mouth,
A little air flows through it, and when it blows strongly, it does not pass through being hermetically sealed.
Perhaps I think that suppression of internal pressure rise is suppressed and fuel leakage due to falling etc. is prevented.
My car was a resin tank outside the company so I was worried about the influence of the rise in the internal pressure during the summer,
I'm satisfied with Large meeting the goods you want. I do not care as much as Hose is a bit hard (Lol)
It's also very convenient to use Hose to spin around at Valve.
View detail
It looks nice
D-TRACKER (98) It attached to.
Since carburetorWarmer has been removed "For dTRACKERX" I bought.
Because there is a slightly too long Hose, Cut it with Cut to install it.
Tank can not be installed unless it is removed - - Maybe.
It looks pretty good.
View detail
KLX250 ('07) Used in
Although it may be a problem of individual differences of Motorcycle, Left Side (Radiator ~ Engine) It was a bit longer because 1 pc of Cut and adjusted it. There are some places where Curve is somewhat different from OEM, but it is soft, so there is no particular problem. Since SiliconHose is durable impression than OEM's Rubber, I think that this price is not bad at this price. View detail
Only Cap's Sticker looks
I replaced it with the exchange of Radiator solution.
It is not even Parts that you can experience, so if there is no problem as it is, it is left as is. I thought that it would be nice if the color of Cap was kind.
View detail
Is not it high?
I do not know what will change like a TRAIL car, but I purchased it mainly for Dress-up purpose. Noticeably Parenthesis Is not it expensive a bit, is it not good to lower 2000 yen yet? DRC?
With that and the Instruction Manual there is nothing, so let's do our best and install it! Hose is also a stiff one so we will fight hard! Radiator hose pliers are necessary!
In the case of KLX 250, Radiator hose under Tank was a little Large strange!
View detail
I have three
As this price includes 3, it is profitable.
Since it will remain Paris after detaching it, it is necessary to fix it with File etc..
Since it can be removed with Bolt, it is no more disconnecting Wire every time it is removed.
View detail
Necessary enough
It is a simple part so there is no special Impression, but it can be used without problems as Fuel Hose. However, I do not know about aged deterioration yet. The color is not black, it is somewhat gray. Two Clips are attached. View detail
As expected but a bit hard?
I bought it as Hose of Fuel cap.
Price is not high, Tank shrinking Small - It was deciding that it works in conjunction with inflation and a backflow prevention valve inside it.
It is a pleasant miscalculation to remove Hose as it is without twisting it as it turns when removing the cap.
However, it was harder than expected and I had a bit of trouble walking around Hose.
I am writing a detailed article on my blog
http : / / www. botti-bk. com / entry / 2016 / 07 / 12 / 191254
View detail