Reviews
It is quite convenient to have it in Single Body.
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
This will bring together the electrical system for the time being.
The terminal connections are in good condition and are securely fastened with Heat Shrink Tubes, so they appear to be water resistant.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
I'm not sure about the electrical system, but ….
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
These are the Parts that are required when using LEDs with DRC's Kit.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Did not work well
XR250MOTARD, used for front and rear Blinker LEDs.
It did not work well.
Specifically, I have become a high flasher.
Honda's Front blinker seems to be a bit special as it also serves as a position.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
It is good to be Small Type
I had bought another Relay before to replace the Tail Lamp LED, but it broke and made a cracking sound when I fell down or did something to it. I thought it would be better to buy the same one, so I bought DRC's Relay this time.
Installation is easy because of its small size, but it does not come with a connector, so it must be purchased separately.
We'll have to see how durable it is, but it's DRC, so I have high hopes!
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Neither blink nor lighting is carried out. It was the same although it did by other motorcycle. If it returns to the relay of normal, it will operate correctly. They are inferior goods!
Neither blink nor lighting is carried out.
It was the same although it did by other motorcycle.
If it returns to the relay of normal, it will operate correctly.
They are inferior goods!
View detail
quality
The quality of the Wiring and the installation of the Crimp are fine.
It's a Large change help that it's sold at this Gold amount.
Additional modifications are required depending on the User, but I purchased this product with the understanding that I would be able to install it without any difficulty.
If you're a pain in the ass, buy Kit!
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Used in 3 different cars. The quality of the thing is good!
[How is it used?
HondaFTR223 (Past)
KawasakiD Tracker (Past)
KawasakiZ400 (Installed this time)
Used in the above 3 car models.
I have purchased three times because I personally felt the quality was good.
FTR223,D Tracker is used with DRC's Blinker, and for this Z400, the Blinker Bulb is replaced with a T10 LED bulb.
All of the above are flickering well as Blinker with no problems.
When I was using the D Tracker, it was used in Race and Off-road driving applications, etc..Large vibration is severe, but this product did not break down.
Was the one you received as per Image?
As per Image. I thought it came with an instruction manual, but the one I received did not have one.
Since there is a lot of information on the Internet, the installation was done without any problems.
Was the installation difficult?
Although there was no instruction manual, I was able to install it on the Z400 without any problems based on the information on the Internet.
However, there is a reason why it can be installed without problems.
The reason for this is that we have a service manual. It is.
Whenever I tinker with electrical components, I make sure to purchase and keep a copy of the Motorcycle Service Manual.
Service manuals always include a circuit diagram, which is useful when tinkering with electrical components.
Again, if you know what color the power and signal lines of Relay are, you can connect them with no problem if you have the service manual.
This installation on the Z400 vehicle was done with a Liang Maintenance loop and InHemp palmock in the location where the OEMBlinker relay was removed.
How was your experience with it?
My experience has always been satisfactory with no problems.
If you are not particular about the manufacturer of the LED-compatible Blinker relay, I think this product is excellent for the Large change cosmetics.
[Included Parts:were they on?
Bullet Type Terminal
[Was there anything that disappointed you?
It did not come with an instruction manual.
Items to buy together
Bullet Type Terminal in Emonetc.
The attached Bullet Type Terminal is not strong enough to recommend its use.
Service manual
View detail
Wire harness for DRCMOTO LEDEZ Electrical kit
It takes a lot of work to make your own Harness.
Cost performance was the best because it covers all the necessary electrical components.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Please tell me. (_ _) I can't get it to work.
I installed a LEDICRelay made by MOTO LED and the Blinker did not respond.
The other day, when I installed DRC's LED Fender Eliminator Kit, KITACO's Unbreakable lensMini Blinker on the front and rear of KLX250s, High flasher phenomenon occurred on the blinker. I installed the LEDICRelay made by Moto LED, but the Blinker did not come on.
Are there any other necessary parts that I need to install? Please let me know if you have any knowledge about this. (_ _) m
View detail
WiringRefreshing。
It is convenient to be able to use it many times because it can be removed with Release. View detail
A talisman.
Tie Wrap as a good luck charm when you go to the forest road or touring.
The thickness is about 7mm and it's very firm, so you can use it again and again, which is a relief when you're in a hurry to stop the Tie Wrap when trouble happens.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
I couldn't install it because I overlooked a key point.
I bought this to use on my WR250F, but I didn't read the instructions carefully and ended up not being able to use it ……
It's a product I didn't have to buy because it worked fine without this ICRelay on the WR.
I don't know when the corresponding vehicle will be available to me, so I'm keeping it just in case, but if I have a friend who wants one, I'll give it to them.
The thing itself is very carefully built and seems to be quite durable, as it is an Off Car Main brand.
View detail
Crimp at the Coupler terminals needs to be checked
It's a big help to get UniversalHarness at this price
However, the contact failure occurred frequently, so I inspected it
There were several terminals that did not have enough Crimp
Disconnect the Coupler terminals before installation
Recommendations to check if you have crimped properly
Maybe it's a CHINA, but
Some of the terminals are very nicely crimped, so you can use them as well
Apparently there are complete amateurs mixed in with the workers
Please refer to the attached Wiring diagram with the addition of Headlight Wiring Please give me a copy
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
It's not blinking
After replacing the valve, it was not reacted by SW ON Yellow light upside down, front and back lit up. I think it's defective. And I turned it back on flasher status. Will you replace it? View detail
Multitude Of Uses
I keep a few with me on the bike and come in very handy being reusable. They can be used as a simple locking device and as a replacement for the oem electical cable ties, which are of similar design. View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
no problem
CRF250L mugenSpec. Mounting on.
For the company's LED Blinker back and forth installation, we replaced it.
You can remove the RightShroud and access it, but it took time to install it. (Somehow installed per the original position)
It is necessary to separately purchase a plug-in terminal and a Coupler.
There was a problem with the crimping of the terminal, it did not fit in the Coupler, it started again several times and it became usable. I think that it is good because I could exchange it before the OEM expired.
Position function is OK.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
The goods are good.
CRF250L (MD44) It installed in.
Unlike MD 38, the installation location of Blinker relay is different, I thought that Wiring would be a little longer.
Since it can not be mounted close to Injection, processing such as routing Wiring upward is necessary.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Before and after KDX Blinker LEDization
Mounting on KDX125SR.
Since KDX 125 is 12 VDC after A 2, it is easy to make Blinker LED.
Compared with other companies the price is cheap and easy to use.
Since KDX employs a system in which front and rear Blinkers flash alternately to suppress the burden of power
Bridge the car body side Blinker + and connect it to the Red of Relay,
Key ONWiring (Brown) And RelayYellow color.
The surplus Black crimps the muzzle terminal and the Body ground.
As a result, it will blink simultaneously before and after, but I think that there is no problem with power.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
LEDization
I purchased Blinker, Fender Eliminator and ICRelay.
First I think that it will be High flasher with only Blinker and Fender Eliminator attached.
Actually tried!
I think that it is better to buy at the same time because the price is also cheap
View detail
I am hiding in Bag
Normal Tie Wrap disposable.
Since this is reusable, it is possible to use it for purposes other than the original use such as fixing Cable and other things, especially when Camping touring something Small thing also increases, so I make it lurk in Bag for just in case.
It is not an obstacle as well, so I think that it is good to keep it for emergency.
View detail