Reviews
Careful work was essential for the softer TPU.
It was affixed as protection against the odd summer heat and direct sunlight.
First, I will list the items that were of interest to me in the work and that I think should be noted.
In addition, it is necessary to prepare a water spray container, a small-size film scraper, kitchen paper, and a paper windshield wiperetc.
We believe that it is better to proceed one by one without haste, except for PROs, so as not to make mistakes.
The first thing to note is that dust removal should be thorough, pointing to the included Kit for a clean finish.
Next, positioning should be done carefully and securely. If this is not done properly, the paste will not be applied properly.
Then, check to make sure there is no TPUFilm left on the release paper on the Meter side! After confirming that there is no residue of TPUFilm on the release paper, spray a large amount of water on the Meter side and the mounting surface to prevent shifting, and then gently place the TPUFilm on the Meter side and the mounting surface.
(I thought this was Large! I didn't notice and wasted the first one with the film still on the release paper...)
Finally, turn up the upper yellow release paper a little and spray it with plenty of water using Spray, then use a scraper on the upper side of the yellow release paper! and then eject the air from the top side of the yellow peeled paper in each direction.
I stuck it on anyway, thoroughly and carefully checking and not compromising.
Unlike the W, this soft TPU film is thin and stretchable, so I thought it would be as easy as the hard film for the W. However, I failed in both the display and the tachometer portion of the first sheet. (Sweat)
The second one was barely successful in attaching both, and the installation process was both a relief and a satisfying experience.
After the application, there will be some white traces until the water dries, but after it dries, the finish will be clear and beautiful.
Maybe the price and the work will protect it well from UV and WOUND.
It has been a year for the W and it still looks the same as when it was applied, so I expect it to be more durable in the future.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
DRC MeterFilm
It was very difficult to install, I bought it for Z900RS and it goes on without any problem. View detail
It's the same as LCD Film on your phone, although LCD Glass is better.
[How is it used?
Just put it up, not sure yet.
Was the one you received as per Image?
Street Image
Was the installation difficult?
simple task
How was your experience with it?
Not sure yet.
[Included Parts:were they on?
Quantity:It was 1 Set of 2pcs.
[Was there anything that disappointed you?
I want to keep an eye on durability.
Other items that would be helpful
Opinions and requests to Manufacturer Please release LCD Glass as well!
View detail
good for the mental health
[How is it used?
Meter protection.
Was the one you received as per Image?
It is the very form that anyone would imagine.
Was the installation difficult?
It is no different than the protection of a cell phone.
How was your experience with it?
It is a physical baRear, so you feel 100% protected.
[Included Parts:were they on?
A hand towel is included.
[Was there anything that disappointed you?
It is something that does not exceed the imagination at all. It is ordinary.
Other items that would be helpful
Points and hangs for installation...Just stick it on. No instruction manual required.
Availability and comprehensibility of Instruction Manual - Level that it is available but unnecessary.
Caution...watch out for dust....
View detail
It's a good product, but I'm thinking about buying it again
Be sure to spray water when using it. If you don't, it'll float a bit like me. It's good to prevent scratches. You are willing to repurchase, but don't forget to spray water and use it. View detail
Normal
It's a good item because it prevents daily scratches. But it's harder to fit than I thought. I dare to recommend someone who is dexterous. One tip, be sure to spray water when mounting. If you don't spray it, it leaves a little bit of air bubbles like me... View detail
Sunburn and scar prevention
Purchased for Meter Protection
Seal itself is firm.
It requires hang when applying it, but I think it can be applied without any problem for those who can apply protective seals for smartphones.
View detail
Construction is easy
It was easy to follow the instruction manual. If you fail, you can always use the spare Quantity:It says "1 Set of 2pc. I am sure that the Quantity:1pc. did not peel off the surface and a spare was used.
I could see why. I think it is better to have an effect than not to have an effect.
View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB1300 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR
Dust is the …
It's as difficult as putting it on a cell phone screen.
Dust is in … two sheets each, so that's good.
View detail
I thought I had become Wrinkle, …
Because the hair Scratch came with the Meter of CROSS CUB, I bought it. I cleaned it carefully with Plastic cleaner before putting it on, and put it on. … Hmm? It became wrinkled. There were a lot of bubbles and wrinkles, so I gave up and peeled it off. One more sheet, the spare Seat is Quantity:I decided to put it on more carefully because it had become a Set. However, the air bubble and the wrinkle were still made, and because it was said that the wrinkle and the place which became white were acclimatized in two or three days in Instruction Manual, I decided to look at it as it was. Then, the place that had become Wrinkle became almost inconspicuous. It may take a little hang to put it on, but if I can put it on well, I think it will be a very good finish. View detail
Fits: HONDA CT125, HONDA MONKEY125, HONDA TRAIL125
It's hard to put it on a curved surface...
[How is it used?
daily use
Was the one you received as per Image?
As per Image, 2pcs, thin feeling of Screen Protection Seal for smartphone.
How was your experience with it?
CT110 HUNTER CUB Meter is difficult to paste because of the curved surface, I was not able to remove air bubbles well!
[Points to note]
Difficult to apply, especially to remove air bubbles, I was left with a few bubbles!
View detail