Reviews
Fits: HONDA CBR400R, HONDA CBR650R, HONDA 400X, HONDA CB650R, HONDA CB500X, HONDA CBR500R
easy to stick to
The size of the film was perfect for my car model, and it was very easy to apply as it came with a supplementary seal. View detail
It is a good item
The installation, brightness, and product accuracy are round. Glad I bought it! View detail
Installed on FTR223
[How is it used?
Installed on FTR223.
Traveling:Street riding, Touring
Used for about 3 years.
Relay is from DRC.
Bracket was also used from DRC.
Was the one you received as per Image?
As per the image, it looks SMART and would look good on the FTR223.
Was the installation difficult?
Attaching the bracket to the car body and attaching the blinker to the bracket is quite easy. However, installing the blinker requires some electrical work, which takes time and effort, and is a very large and strange job.
It is a difficult task in light of this.
If you think that electricity is difficult or dangerous, ask the shop to install it for you.
However, once you learn the electrical work, you can customize it in many ways, so although the initial cost will be high, get the tools and try your hand at it.
How was your experience with it?
This was my first LED blinker, and I was very pleased with the large size, as the glow was completely different from the OEM and I installed it myself.
The Style also matches the FTR223, which is good.
I had no problem with the lifespan of the product after three years of use, and it was very resistant to vibration and did not cause any problems.
It seems to be a very durable LED blinker.
[Included Parts:were they on?
Bullet Type Terminal
[Was there anything that disappointed you?
None
[ITEMS TO BUY TOGETHER
ICRelay
BlinkerMounting Bracket
MOTO LED Pilot light harness
Secure Bullet Type Terminal with Emonetc.
Electrician's tools
Service manual
Vinyl Tape
In Hemp palm pack
WiringProtective Tube
View detail
Shipping
Super service, arrived from Japan to my house in Ontario in 2 days!! Awsome!! Packed well with no damage to box or parts. :) The parts are as described. Have not installed yet. Will be going on a Yamaha XT250. View detail
Refreshing
Installed on SEROW250.
The Wiring process was easy.
The Rear area has been Refreshing.
View detail
This is the best Tail for Dr-z400sm
I did it at last. I thought that now is the last chance for the dr-z400sm which I owned in the past, and I bought a First Model Type in the shop of my father who likes Off-road Large in the neighborhood at a very low price.
So I immediately went to my dad's shop and had him put on a drc Fender Eliminator.
The Blinker Bracket is sold separately, but my dad's shop has it in stock, so I got him to service it for me.
The Fender Eliminator is a great match for the Racer dr-z400sm.
I don't have the car in hand now because it is still undergoing inspection and delivery maintenance, but every time I take a break, I go to see my car under maintenance and I am enchanted by its coolness.
View detail
Looks super Refreshing!
I put it on my SEROW 250FE.
The Rear Carrier was not made by TwoSEROW, so I was able to install it without any modification.
I'm glad I bought it because it looks and feels quite Refreshing.
Because there is an imprecation that License Plate Light is easy to break, I think that I will look at it with future use.
View detail
Sleek
Small but still sufficient bright to replace the original blinker. Spacers are provided to adjust the distance between blinker and fairing. Bullet connectors are also included. View detail
STD Blinker can be installed Exactly?
It was my first time installing this product and I was worried about the fit.
It fits nicely into the Rear Fender, and the STD Blinker has holes that can be installed Exactly, so it was easy to install.
View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB1300 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR
A good protective film.
A liquid crystal protection film was attached to protect the liquid crystal when driving. I don't worry about scratches. The most important thing is... It's very good because there's not much difference in Xi'an Province. View detail
Fits: KAWASAKI NINJA ZX-10RR, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z900, KAWASAKI NINJA ZX-10R, KAWASAKI NINJA1000SX, KAWASAKI Z H2
I'm disappointed
When I received the product and opened the package, I found that the Film and Seal had been peeled off half of the Quantity.:There was 1pc. Film is also bumpy and useless. Quantity:1pc. seems to be available. View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB1300 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR
It's not worth $2,400.
I used it on my 2016 SF. The year doesn't fit but the shape is the same so it came on fine.
It's good that it came on, but the air bubbles are not coming out well.
The Scraper is made of paper, so even if you put a lot of pressure on it, it gets squishy and the air doesn't go out.
It says that if you use water, the air bubbles will come out better, but I don't even think it will be that clean.
Quantity:1 Set of 2pcs. so I will try to use it with water next time.
Also, the price is too high.:I'll take 1pc. and you can sell it for half price...
If you buy a new car and have it installed by a dealer, I think it's a good buy, but I don't think it's worth paying $2,400 to have bubbles in a Meter that's been driven tens of thousands of miles like mine and has even a hint of line scratches.
This is what happens when a Level person who has never had air bubbles in their phone's Film needle does this, so if you're not good at this, I recommend getting a PRO.
Spare is Quantity:It's not bad if you think it contains 1 Set, but I can't say it's good because it makes people who only have enough to put it on pay an extra 1200 yen. Air bubbles enter, and Scraper is not very useful.
The conclusion is that if you have a new car installed by PRO, it is possible, but other than that, I don't think it's a good idea.
View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB1300 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR
I'd rather not put it up.
Maybe I'm not good at pasting, but even though I followed the instructions in the instruction manual, the protective film didn't conform to the surface and I couldn't get rid of the large air bubbles. While I was having a hard time, very small dust got in and it became very dirty finish.
It may have a certain effect to prevent external damage, but for the transparency and appearance of the meter, spraying with Barriers coat is several times more beautiful.
View detail
If you want to convert DR-Z400SM to Fender Eliminator, this is it!
I think the back view of the Fender Eliminator, which stands out for its sportyness, is a good parenthesis for MOTARD.
Tail lamp with good color is more visible to the following vehicles than OEM tail lamp, and it is convenient for safety.
Not only DR-Z, but also trail bikes are familiar with DRC which is safe and stable.
Don't forget to install Reflector for legal reasons.
View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB1300 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR
Dust is the …
It's as difficult as putting it on a cell phone screen.
Dust is in … two sheets each, so that's good.
View detail
Fits: HONDA GROM, HONDA CRF300RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250L(S), HONDA CRF250L
To protect the LCD screen
I didn't think I'd need to install it much, but since it's a new car, I thought it wouldn't hurt to put it on for protection.
When I put it on, it feels like it has more texture because of the glossy surface. But when I cut corners when applying it, it left a few air bubbles. Quantity in reserve:It comes with 1pc. so you can replace it, but it's not a concern.
I can't evaluate the durability of this product yet.
View detail
Recommendation to CRF250rally
'17 CRF250rally. (Type LD) It is attached to the
Personally, I think the TypeLD with lower seat height is obviously stocky looking compared to the Standard height.
Fender Eliminator figure is the impression of the buttocks up Refreshing, especially from the rear, the appearance of short legs feeling (?) is deceptively Stylish, I feel.
By the way, it is necessary to pay attention to the fact that the edge of the license plate and the RightRear blinker are burned and blackened little by little because the exhaust heat becomes near when the YOSHIMURAExhaust System is put on.
However, because it is RALLY50 that is considerably heavy as 250TRAIL, the weight reduction by Fender Eliminator is glad, and there is a sense of satisfaction of the appearance, too, and the Merit that can be obtained by this product attachment exceeds the Demerit of the mud splash etc. more than Large personally.
View detail
Fits: HONDA GROM, HONDA CRF300RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250L(S), HONDA CRF250L
No White in the Rain
Compared to others, this product didn't turn white when wet in the rain. View detail
Looks great, beware of License Plate Light.
Installed on a '17 CRF250M. Lens is Red color.
The OEM's sluggishness around the rear is replaced by the Refreshing appearance and the weight reduction gives the car more dynamic performance.
I think that the installation can be done without difficulty by the person who can Rose around the Rear.
Both the Stop and License Plate Light are bright and can be seen from the rear even in daytime. Both appearance and function are Recommendation.
There are some issues with it. I had the same problem with my past XR250MOTARD, but the License Plate Light stopped working after about a year. I think that this is a very minus factor because I might be taken care of by the police by the maintenance failure, and although there are repair parts and sales, there is a rather expensive feeling to make it an expense at the pace of one year. I install the license plate light of another company separately and correspond.
Finally. It depends on the type of car, but you should expect almost no mudguard function on a rainy day. You will get wet on the back of Level. I think that's the price for the appearance, so it's important to give up. (^^)
View detail
Fits: KAWASAKI W800 STREET, KAWASAKI W800 CAFE, KAWASAKI W800, KAWASAKI MEGURO K3
It was okay, but a little expensive.
I bought this product because I had a mysterious pin hole on the meter surface and it caused a crack.
First of all, from a bad point, Scraper of paper is not usable from the moment it gets wet, and there was the harm of the scrap which peeled off adhering to the adhesive surface, etc.
Included Parts:I think it is necessary up to here. GuideSeal and WetSeat etc. for installation and fixing are not necessary, and it is enough if there is a dust remover called Absorber and a MINIGlasses wipe.
I'd like to do something about the Paper Scraper instead, and even though it comes with Included Parts:many and two spares, is it the inclusion of these that makes it a bit expensive?
It is not difficult if it works like WindowFilm of the car etc. about installation or pasting.
No initial positioning is required.
How about the following installation method?
? Cleaning of the bonding surface, careful dusting with absorber
Spray enough diluted detergent on the adhesive surface of the BodyFilm. (The position can be easily shifted and changed by spraying enough water)
Bubble removal with hard RubberFilmScraper for Vehicle etc.
? Wipe up moisture etc.
This will give you a finish almost as good as the Manufacturer's comment, and you probably won't need a spare.
I think of it as a spare and store it for the future in case it deteriorates.
The finish is not bad, and the hard film of for W800 was not difficult, although there is some difficulty in the three-dimensional curved surface. ~? There is some difficulty in 3D curved surface, but it can be managed by the above method.
I think it is good for Ideas, the processing is accurate and beautiful, so the satisfaction after pasting is quite good.
The protection performance and durability are unknown, but it is definitely more effective than the unprotected state where there is nothing.
There is no useless reflection, and the transparency is the same as the state without sticking.
It certainly looks better than the phone protection Film, I think it's not bad because it gives you the peace of mind that you're protected and it also prevents scratches.
View detail