Reviews
For License Plate protection in off-road driving
good point
・ Corresponding to Notification No. 1266 of the Ministry of Land, Infrastructure, Transport and Tourism.
Looks pretty sturdy.
A bad point
Not much if you can justify the price.
For License Plate protection in off-road driving
Stainless bolt and aluminum spacer are included.
I was able to co-tighten with KIJIMARearReflectorFrame.
Please let me know if you use the Fender Eliminator Kit and run off-road.
View detail
fashion-conscious
Effective for protection of license plate and for press-up.
The included stainless steel bolt is rust-resistant, and the matching color of the Holder is one of a kind.
It also looks good.
View detail
Mounted on PCX160
I bought this to protect my license plate and dress-up my new car.
I had to widen my nails to get the Number in when I installed it, but other than that it was fine and took about 10 minutes to install.
The texture was also Matte pearl and luxurious.
The Plate will make it stronger and prevent the Number from being bent by mischief.
I didn't use the supplied Bolt stuff, I bought it separately.
View detail
To retain shape of License Plate
I got caught at a galley and the License Plate crooked
Seal of the mandatory vehicle liability insurance is peeled off, if you do not do it well, the inspector
I bought it by being called out.
Fine enough, it is strong and so far License Plate has shape
I can keep it..
View detail
PlateHolder
There was no installation problem.
I heard that such Plate installation to Number is prohibited but I heard that forest road etc. It would be better to prevent bending by falling in
View detail
Purchase DRC company's PlateHolder 126cc
Material firmly for price : Aluminum is Large Variety satisfying item!
Other people are also mentioned in Impression, but claws of holding down when narrowing the License Plate are narrow. Therefore I have to open it a little with Slotted screwdriver etc and Plate will not enter deeply properly.
Material : It is easy to bend because it is Aluminum Adjustable without any problem I think that anyone can do it.
I was able to install it although it was Limit to contact Rear brakeLight Cover. (Us CB400four97 year type)
I think that it is not a problem with most Motorcycle.
View detail
OFF for cars DRC
Since the Holder I used before was broken, I tried it as a Holder of DRC used by Fabi Friend.
Although there was Anodized Finishing in the item explanation, it looks like it looks like finish like chiyimi painting and has a heavy feeling, it is a firm build.
Since the part sandwiching the Number of the lower side was narrow and Number did not enter, it was necessary to widen a little.
It is nice to have Aluminum 's Washer but thankfully there is a feeling that it is getting a little bit too elaborate so it may be nice to make it simple and make it cheaper.
Also, although Self-lock's Nut is Good, it's OK if Washer is added to the OEM Resin Fender Level, but Bolt is a bit short.
View detail
It looks nice..
I purchased Red according to the body color.
This product was chosen for color - Material - From Number
Because it is a little Large, the frame is attached at the stage where Number is attached
I chose it because Contrast is good..
For TRIAL cars, we chose products that seem to be light because the sturdy products are defective.
The point to worry about is that the folding of the frame is deeper and in the case of 2Cycle cars, since oil smoke is attached, cleaning seems to be a little Large strange but it can not be helped to give strength.
View detail
He bought the little Dress-up of the Motorcycle up. The price was also cheap, and the Bolt for attachment was also attached and it was good. However, before half a year has passed since it attaches, a color fades and beautiful red has become whitish. I
He bought the little Dress-up of the Motorcycle up. The price was also cheap, and the Bolt for attachment was also attached and it was good. However, before half a year has passed since it attaches, a color fades and beautiful red has become whitish. It just said that it was reasonably priced. Since it is cheap, it is not dissatisfied. View detail
I think that attaching is eager before keeping a Number in this way how. Probably, this will be better, since money will seemingly be applied if a Number is made if it actually becomes hollow and deletes or bends. It will not break immediately
I think that attaching is eager before keeping a Number in this way how.
Probably, this will be better, since money will seemingly be applied if a Number is made if it actually becomes hollow and deletes or bends.
It will not break immediately, since
thickness is also solid.
The after color has not faded.
It loses heart and there is also no sound.
with the
photograph, although it is a red Washer, originally it is blue -- it changed.
It is not the foppish Bolt and that blue which are taken out with whether incidentally it is DRC.
I think that it is a color brighter than that.
View detail
[Webike Monitor] Is protection of a Number plate a Dress-up of けど which will be the original purpose, and the view seen well up once? Although the Red was purchased, a color is very much good touch.
[Webike Monitor] Is protection of a Number plate a
Dress-up of けど which will be the original purpose, and the view seen well up once?
Although the
Red was purchased, a color is very much good touch.
View detail
It was a beginner, and this article was found when searched with the ability not to be dressed up handy. Also making is good, and since it has done finely, it is satisfactory. Since it is Off vehicle, when it falls, it is believed that a Number
It was a beginner, and this article was found when searched with the ability not to be dressed up handy.
Also making
is good, and since it has done finely, it is satisfactory.
Since it is
Off vehicle, when it falls, it is believed that a Number is protected.
View detail
It purchased at protection of a number plate and the one point of the circumference of a tail. More than it considered, it is thick, and reinforcement is also fully felt. Since the stainless bolt carried out continuous use of the thing from before
It purchased at protection of a number plate and the one point of the circumference of a tail.
More than it considered, it is thick, and reinforcement is also fully felt.
Since the stainless bolt carried out continuous use of the thing from before, it was not used, but it is pleased with the aluminum spacer of a holder and the same color.
I also regard a price and buying it rather, if it worries since it is handy as whereabouts.
View detail
It was used for 750 swords. Although there are only many plate holders among other manufacturers, the washer and bolt of an anodized are also attached, and since a price is also handy, that of DRC is a recommend. the dress-up effect up is also hig
It was used for 750 swords.
Although there are only many plate holders among other manufacturers, the washer and bolt of an anodized are also attached, and since a price is also handy, that of DRC is a recommend.
the dress-up effect up is also high -- 笙ェ
View detail
It was not necessarily thoroughly called the dress-up purpose up, and it purchased in order to process it and to make it a blinker integral type. Since a crack of a number plate etc. may occur by large motorcycle of a shock, the reinforcement purpose
It was not necessarily thoroughly called the dress-up purpose up, and it purchased in order to process it and to make it a blinker integral type.
Since a crack of a number plate etc. may occur by large motorcycle of a shock, the reinforcement purpose of use is also convenient.
It is reasonable and color and the thing which is easy to unite with a body color mostly are the reasons of a recommend.
Unlike goods, such as anodized processing, the surface feels ZARATSUKI of paint application, but I also regard it as his being Ali individually well.
View detail
It is convenience to an easy custom-made & mischievous measure! It is simply made to a fashionable at a low price. And it is effective also with the mischief which can bend a number. However, since it overflows into the surroundings of a number, p
It is convenience to an easy custom-made & mischievous measure! It is simply made to a fashionable at a low price.
And it is effective also with the mischief which can bend a number.
However, since it overflows into the surroundings of a number, please become brave about the check of an attachment place.
Incidentally, GSR400 interfered in the reflector and was not attached.
View detail
The one cylinder heard that vibration is large and a number may crack, and purchased. Texture also holds a number firmly well. Although a bolt, a nut, and a washer also follow together, washers are a holder and the same color. And the pattern
The one cylinder heard that vibration is large and a number may crack, and purchased.
Texture also holds a number firmly well.
Although a bolt, a nut, and a washer also follow together, washers are a holder and the same color.
And the pattern is carved and touch is made very good.
Although it is good also for a vibration isolation, appearance also becomes suddenly better and is satisfactory.
View detail
For number protection on a path through a wood etc. He bought it. When it arrived at first, I thought that it was dissatisfied in the blue which is not more skillful than the photograph of an article introduction. However, this blue will be correc
For number protection on a path through a wood etc. He bought it.
When it arrived at first, I thought that it was dissatisfied in the blue which is not more skillful than the photograph of an article introduction.
However, this blue will be correct and satisfied if it attaches to a motorcycle.
The photograph was somewhat regrettable although it was satisfied with the goods themselves.
View detail
It has the experience at which the motorcycle cover was caught in the number plate and turned, and purchased. I think that attachment is also easy and it is good also as a sushi color accent.
It has the experience at which the motorcycle cover was caught in the number plate and turned, and purchased.
I think that attachment is also easy and it is good also as a sushi color accent.
View detail
[Buying motive] ZRX1200 (06') is owned. Since the motorcycle cover was torn with the edge of the plate although it thought that the dress-up of a number plate up was unnecessary, the plate was covered with this product, and the angle was smoothed.
[Buying motive] ZRX1200 (06') is owned.
Since the motorcycle cover was torn with the edge of the plate although it thought that the dress-up of a number plate up was unnecessary, the plate was covered with this product, and the angle was smoothed.
(since the motorcycle cover of a fire prevention type is also expensive) Since the reflector and the number plate are fixed to - fender less kit [to demount (existing product)] by the hook of gold, a bolt is removed from the number plate back side.
- [to attach (this product)] -- after fixing a number plate to this product first (nail), it fixes to the existing bolt through this product and an attached aluminum washer.
(the stainless bolt nut of this product attachment was not used) Are they only [existing product removal time] and 10 minutes?
[This product attachment time] Is it only - 20 minutes?
[Result] It was finished with the image which spoils special fender less-ization as - and as for which things are not.
(Although the license holder of carbon was examined at the beginning)
I hear that it was cheap and has achieved the purpose. Is it a place as four * as it is [grading of goods] above understood that it is comparatively [ expensive ] large-patterned and there are many goods whose meaning of special fender-less-izing is lost as a result of investigating in the shop etc.?
View detail