Reviews
I would like to have a larger size!
Purchased as a countermeasure for Enduro race, which is expected to be in muddy condition.
If mud gets into the gaps in the Under Guard, it will make it much heavier and washing the car will be Large strange.
The countermeasure is to fill the gap with this Sponge.
It worked well in actual driving, bouncing mud off the ground.
SpongeQuantity even if you use it for Off-roadFull size vehicles if you want.:I felt that it would be better if they could sell it in a large size so that only 1 pc. is needed.
View detail
countermeasures against mud
[How is it used?
Situation that cannot be avoided when playing Enduro with HUSQVARNA TE250i Muddy." I think that the secret to longevity is how much we can enjoy this Condition. I feel that the secret to a long life is how much you can enjoy this Condition.
I don't dislike driving in the mud that much, but I can't help but fall over or run in a swamp. Mud, dirt and others are heaped onto the Motorcycle in Large quantities.
this "Mud." One article reported that the weight of the car before and after driving in Muddy condition can change by nearly 20 kg due to the mud adhesion factor.
I was convinced when I read the article that it was really my motorcycle that had fallen over with mud on it.
If that's the case, let's take various measures to prevent mud from sticking! So, I'm an Off-Roader-Large lover. Dirt ace" Ya Silicon spray. I sprayed a large amount of "Mud" and drove around. The feeling was that it was better than nothing, but the mud adhesion was not that small because of the spray.
Then, let's physically prevent mud contamination! That is why we put on this Sponge.
DirtFreak has also released a Formetc. to be attached to the FenderReverse side, but we heard that it is difficult to remove it once it is attached to the Fender, so we were the first to install this Form, which seems to physically prevent mud from mixing in by putting it in the gap.
How Large is Large? We didn't even know how much we needed for the Husk, so we used the Quantity:2 Set is purchased and installed.
As you can see in the image, we put it between OEMGuard and Engine.
Actually used about half of 1pc. Quantity:2pc. No Set was needed either.
I installed it and had a Race with Muddy running, so I actually used it, but I feel it is lighter because it is indeed physically free of mud. Washing the car also became somewhat easier, so it is effective for the price.
I was concerned about the heat resistance with Engine heat, but I used it for 1Race2 hours and had no problem at all.
I think everyone should install Enduro rider.
Was the one you received as per Image?
How was your experience with it?
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
To those who are tired of mud car wash
Every time, Under Guard of Motorcycle that got muddy, muddy comes out even this, Enduro...
Why is he Small Shi-chan as to come out when forgotten.
If you look closely well, Small Bran - chan who makes a face with Konnichiha, Mr. Straw.
It is this Urethane foam that eliminates the gap that they enter!
If you buy it at Home center, I'm worried that I will not be able to solve it!.
However, without Under Guard there is no point!
Stuff it into the gap between Under Guard and Engine.
Then see, the car wash is easy!
And it will not get heavy!
View detail
The plants invasion between an Engine and a Skid plate is likely to be prevented. Slight resonance of the Engine may also be prevented.
The plants invasion between an Engine and a Skid plate is likely to be prevented.
Slight resonance of the
Engine may also be prevented.
View detail
[Buying motive] When attaching the under guard of pro skill to -KDX220SR (99), it is used for the crevice between skid plate and an engine published also by Mr. Webike's HP, and the fatal damage by a mud jam or a stepping stone is prevented. It is pul
[Buying motive] When attaching the under guard of pro skill to -KDX220SR (99), it is used for the crevice between skid plate and an engine published also by Mr. Webike's HP, and the fatal damage by a mud jam or a stepping stone is prevented.
It is pulled by and is this product DRC skid plate form product number:D58-17-012. 30 cm x general-purpose size:15-cm were purchased.
[Attachment of goods] etc. - book product is cut and inserted in the form of the vehicles lower part with scissors etc., and an under guard is only fixed.
- It is easy to treat to the extent that the small hole for drain bolts, etc. go out simply with scissors.
- There is no mud jam now.
[Grading of goods] - size is also a size which can respond to almost all motorcycles, and it is a thing cheap [ a price ] and ordinarily good.
It is considered as four stars.
View detail