Reviews
Colorization while open ended
The grip was replaced with an open-ended grip in conjunction with the installation of a hand guard with a fixed grip end, so the color was matched to the vehicle body color. View detail
Slip-resistant firmly in hand
I used it for 10,000 km and bought the same product because the waffle pile was worn out. The price is reasonable and good. View detail
This is the only one I use.
I can't use any other Grip than this one anymore, probably.
The grip, gripping feel, and thickness are just right for my hand.
View detail
Softer and Grip better than OEM
I used to use OEM or zrta raceGrip, but when I combined my KLX250es with zeta cx bar mx412, the width was not enough.:Pair (for Left and Right) After much trial and error, I found that OEMGrip (Total length:12, 6mm) I thought that the width problem would be solved by adding a DRC Team grip, which is about 1 cm shorter than the DRC Team grip. Unfortunately, Black was sold out, so I bought Color:I purchased the Gray color, which is quite cool, and the narrow grip width is exactly the width I wanted for the Handlebar GripPoint, so I give it a hundred points.
Grip is a little softer than OEMGrip; slightly firmer than zeta raceGrip.
The durability, operation, and gripping force are probably somewhere between OEM and zeta raceGrip.
It's great because it's inexpensive and you can choose both open end and closed end.
View detail
Easy to operate even with muddy Gloves.
[How is it used?
After purchasing the vehicle used, we purchased a DRC-made Grip after hesitating between OEM and replacing the Grip that was already worn out.
We wanted a grips that could be operated securely even with wet or muddy gloves, as we also intended to use it for mountain activities.
Was the one you received as per Image?
I knew the design and comfort of the grip because it was installed on the vehicle of a friend who plays in the mountains, so the product was just as I had imagined.
Was the installation difficult?
All you have to do is remove the old Grip and install the new Grip you have just purchased.
If the old grips are sticking, they can be removed relatively easily by gently inserting a fine -driver between the handlebar and the grips and spraying some parts cleaner into the open space (or using an air compressor if you have the right equipment). (If you have the right equipment, you can also use an air compressor to remove the parts.)
After the old grips are removed, degrease the inner diameter side of the new grips and handlebar with parts cleaner, and after drying, apply a thin coat of RubberBond to the handlebar and insert the new grips.
Wait half a day to a day for RubberBond to dry and ride out.
How was your experience with it?
Like Yamaha's OEMGrip, it has an uneven surface on the waffle, making it easy for the user's fingers to catch.
Is it the difference in Material? Is it simply because they are new? I am thankful that the vibration is reduced so that my fingertips do not become numb (but not completely numb) even after long hours of driving.
Furthermore, since it is an open end type, it is very easy to install the handlebar guard without the need to drill the grip end by yourself.
[Included Parts:were they on?
Quantity:Pair (for Left and Right) This is a Grip-only product of
[Was there anything that disappointed you?
Personally, I don't have any. The price is Reasonable and I would like to purchase Repeat when the current Grip I am using is due for replacement.
Other items that would be helpful
Point and hang of installation
Please install the RubberBond so that the waffle-like part is at the fingertip position when you ride.:Pair (for Left and Right) should be adjusted so that it is in just the right position.
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual... Well, I don't think there is any problem because this product is so easy to understand that I don't think you need an Instruction Manual if you want to buy this product and replace it.
[Notes]
Although it is unlikely that you will make a mistake, the inside diameter of the grip for Right (Axel side) is different from that for Left, so please check carefully before installation.
[ITEMS TO BUY TOGETHER
Nothing in particular, but since the shipping cost for this Single Body alone is not included, it would be possible to purchase other items to make the total amount over 3,000.
[Opinions and requests to Manufacturer
Black and Orange at the time of writing the Review (July 8, 2023). Temporarily out of stock. instead of Discontinued. Is there an alternative product available?
If there are no alternative new products, please continue to sell them.
View detail
It's cheap and Grip, so if you're not sure, this is the one.
I bought Repeat because Grip is a consumable item and it's inexpensive. The design is simple and easy to use. If you have any doubts, I think you should just go with this one. View detail
When in doubt, take this one.
The price is inexpensive, simple, and the grip is good.
If you are in any doubt, I think you should just put this on.
View detail
OEM same etc. or a little Up
This is the first time I have tried DRC grips and they are quite good. The design is also to our liking, with no bumps on the top half.
I combined it with ZETA's Open end Throttle cone, but the length is JUST right.
View detail
easy to grasp
The price is cheap and easy to grip, and the design is simple and I like it. View detail
Simple is Best!
Yamaha "XG250 TRICKER I replaced the Grip of the "Mere Old Man" with this product.
I looked for a lot of Off-roadGloves, but I decided on this Glove which is SUPERSimple and cosy.
The installation was done with Bond, not Wiring.
The pattern of the Grip part is complicated, so I adjusted the pattern before the Bond dried.
I chose the Penetrating type so that I can install the Hand guard.
I think it is possible to buy it in Stock because it is very cosy.
View detail
Cosmo!
Inexpensive, easy to grip, very good Grip!
Cospa is the best!
View detail
So easy to grip and so cosy!
The pattern is different on the front and back of the Grip, so you get a great fit when you grip it!
Material is also soft, so you won't get tired even if you drive for a long time.
I think I'll be using this Grip again next time!
View detail
Good Cost performance
I bought the DRC Team grip because I plan to replace the grip along with the Handlebar replacement.
The part that hangs on the finger is Waffle type, so it seems to be easy to grip.
View detail
DRC Grip
I have used this item before. Re-ordered for GROM to keep spare.Colour black. Quality is fantastic. Fitment is perfect. Installation work is easy. Highly recommended item. View detail
DRC Grip
DRCTeam grip
It was installed in KLX 250.
DRC's with Logo Parenthesis well, because it is closed with Wire
You can use it safely for hard driving.
View detail
All of the off-road vehicle and Mini bike which I possess are favorite to the extent that this Grip is chosen. -- he being easy to grasp, and it being hard to get tired, and it being hard to slide also on water or mud, and, The f
All of the off-road vehicle and Mini bike which I possess are favorite to the extent that this Grip is chosen.
-- he being easy to grasp, and it being hard to get tired, and it being hard to slide also on water or mud, and,
The form which the slot for Wirings is attached and also does not become the obstacle of a hand, the Cut which does not bar a motion, etc. are made into this price, and it is this Performance...
COSPAR cannot but say that it is good disagreeableness and highest.
View detail
[Webike Monitor] In order to attach a Grip-end fixed type Knuckle guard this time [ ], the penetration type Grip was purchased. The clearing work itself thinks that it is almost unchanging with other goods. In order to improve cushion
[Webike Monitor] In order to attach a Grip-end fixed type Knuckle guard this time [
], the penetration type Grip was purchased.
The
clearing work itself thinks that it is almost unchanging with other goods.
In order to improve cushioning properties whether it is the
latest tendency, I feel that there are many soft things, but I also regard this as it being the softer one.
The
recommended Point should have a slot on the Wiring.
Moreover, in a side, 3 and a Clutch can fix the Axel side firmly only by those with four, and a Wiring.
(It is a premise that a Wiring can be carried out with my *) a gripping feeling is also good although it is
trial riding grade -- it feels, and it comes out and is satisfactory.
View detail
Since he wanted to carry out Handle exchange, it united and purchased.As compared with the original manufacturer's product, it is easy to grasp softly. Again, the slot on the Wiring is also attached and it was very easy to attach.
Since he wanted to carry out Handle exchange, it united and purchased.As compared with the
original manufacturer's product, it is easy to grasp softly.
Again, the slot on the Wiring is also attached and it was very easy to attach.
However, although he wanted the gray penetration Type, there is nothing in a Lineup, and it was used, having processed the non-penetrating thing.When
could be carried out and there was a penetration Type, in addition, it was good.
View detail
Although the Grip of the ordinary true circle was used until now, when it rode for a long time, the hand was charmed by announcement called the form based on painful , then human engineering, and bought it.It is an off-road article Manufacturer truly
Although the Grip of the ordinary true circle was used until now, when it rode for a long time, the hand was charmed by announcement called the form based on painful
, then human engineering, and bought it.It is an off-road article Manufacturer truly that there is a slot of the
Wiring.Wiring processing was made my
by stainless lines.
If 0.9 mm is rolled twice, it is tight into a slot.The form where it was based on
human engineering fits a palm, and, surely it is likely to be easy to grasp it.The degree of the
effect should go out for a weekend, and let's check it again during it.
View detail
It exchanged from an authentic positive one on the occasion of handle exchange. It has been two years since it was used on the path through a wood, but breakage has not been carried out yet. It is fairly strong touch. Since it is a waffle type
It exchanged from an authentic positive one on the occasion of handle exchange.
It has been two years since it was used on the path through a wood, but breakage has not been carried out yet.
It is fairly strong touch.
Since it is a waffle type, a hand is not slippery at the time of standing, either, and it is convenient.
It is one article of a recommend.
View detail