Reviews
Foldable Back Mirror is
It is hard to see backwards compared to OEM.
The small overhang was unavoidable, but there was some blurring and we eventually returned to OEM.
It should be considered as TradeOff and used according to the usage situation.
View detail
I might remove it.
I was worried about this product and the Amazon Large land-made product, but I bought it because DRC is cheaper if it is made by WeBig. I tightened it within the movable range, but it is no good. Is this the kind of parts for off-road vehicles that are supposed to fall down? View detail
Anyway, it's a blur!
It looks great and is easy to use, just shaky anyway! View detail
Anyway, it's a blur!
I was prepared for a certain degree of blurriness from the word-of-mouth, but it was more blurriness than I had imagined! View detail
It folds up easily, but...
[How is it used?
It was installed from the beginning for SEROW225W that was given to us.
This SEROW used to go mountain playing with me when I owned the previous Owner, and I saw how easily it folded up during Attack. It's so easy to fold. I thought I was using the Off-road mirror II by Takatsu was also very comfortable to use. If this Mirror gets damaged, would you consider Mirror from DRC?" I thought of it as a "one size fits all" type of thing.
Was the one you received as per Image?
Mirror gets in the way when bushwhacking or attacking difficult terrain." In such a case, the Quantity is placed just above the Mirror Holder.:Pair (for Left and Right) Simple design and mechanism that can be easily collapsed to That's because ConceptMotorcycle is often used for Dual PurPass vehicles at Motorcycle shows. It was a product that made us think.
Was the installation difficult?
Simply remove Normal mirror and install this product in the reverse order (fix it at the desired opening angle).
It is a simple product that can be installed without problems by anyone who can turn the Screw to attach and remove it.
How was your experience with it?
I thought Mirror looked useful at the time, but then I decided to get not only Mirror but also the entire motorcycle, and after servicing the vehicle, I immediately went for a test drive.
Off-road mirror. The product is quite likely to be installed in a single-cylinder engine Dual PurPass car, but this blurriness is...
If you tighten the screws on the folding part, it will reduce some, but really... Some It will only change and will be difficult to fold.
I can compromise when driving on forest roads, but I replaced it with Takatsu's OR-II because I felt it was not suitable for me because of constant shaking even on paved surfaces.
[Included Parts:were they on?
Only the product Body is contained within the Package.
[Was there anything that disappointed you?
Above. How was your experience with it? This is all that is stated in the following section.
Other items that would be helpful
Point and hang of installation
None in particular, Quantity to your preferred opening angle.:Pair (for Left and Right) Give them together and you are done.
[Availability and clarity of the Instruction Manual
The instruction manual is located on the back of the package, and is so easy to understand that it goes without saying.
[Notes]
Yamaha Motorcycles have had reverse screw type RightMirror since the 1980's (I have never owned a Yamaha Motorcycle before then, so I do not know).
[ITEMS TO BUY TOGETHER
Nothing in particular, but Quantity at Sale:Pair (for Left and Right) When the price is less than 3,000 yen at the time of purchase, you may be able to save money by purchasing peripheral parts such as Grip or Short lever to eliminate shipping costs.
[Opinions and requests to Manufacturer
Personally 160 Off-road mirror. Only the Mirror portion of the 161Off-road mirror. I would be very happy if you could change it to the Design of the "I would be very happy, thank you very much.
View detail
Headlight switch has been changed.
The person who posted earlier stated that the Headlight switch is high/low/off.
I can't turn off the lights because the model has been changed before I know it…
The Switch box itself has a good texture and Wiring is fine.
Please be careful if you are considering purchasing this item, as I believe WeBig is at fault for not changing the photos of the display.
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX250ES, KAWASAKI supersherpa, SUZUKI 250SB, KAWASAKI D tracker, KAWASAKI SUPER SHERPA, KAWASAKI D Tracker
Used by D Tracker
[How is it used?
Mounted on D Tracker.
Applications:Motard race, FlatDirt
Used for about 2 years. Many times overturned.
Was the one you received as per Image?
As you can see in the image, it has a short lever, which is perfect for my small hands. Also, the size of the hand guard can be installed.
Was the installation difficult?
The installation is not difficult, but it does require some tools and some adjustment of the clutch. However, since the lever replacement is an introductory step for Custom, if you are well informed, prepared, and have the tools, you will be ready for any battle.
How was your experience with it?
First of all, the hand guard installation was successful and secure.
However, the feeling of operation was not good at all. When I think about it now, I wonder how I used it for about two years. I thought it was perfect for my small hands, and it was certainly better than the OEM, but since the lever position could not be adjusted, I just kept using it. I regretted that I should have used ZETA's Pivot lever, because the lever position is also adjustable for the clutch, and I replaced it later.
Lever is bothered by the lack of control and I can't focus on it.
If you are like me, I recommend that you install a lever that can be adjusted in position.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Glasses Wrench in Size8 or 10 (Spanner) Is Quantity:You need to be prepared because you will need 2pc.
Grease is fine for lubricating the clutch lever after installation, but applying a thin layer will keep dust adhesion to a minimum.
If you don't like dust sticking to your fish, you can apply dry lube such as Kure's Dry fast lube, WAKOS' Bidas Dry, etc. on a regular basis.
For MOTARD with off-road driving, it may be better to apply dry rubs.
View detail
be shaky
The foldable mechanism is good, but the visibility was X. I guess it depends on the type of car, but in my case, it was unbearable to use and I removed it immediately. The visibility is not good because of the vibration.
I don't even have a photo of it because I strongly thought I would never use it again and got rid of it. I don't even have a picture of it. But maybe it's just a minimum security part that is supposed to be blurred between Access to the Course.
But I also think it's a good product, as long as it's vibration proof.
View detail
Fits: HONDA CRF150F, HONDA CR80R/RII, HONDA CR85R/RII, HONDA CRF125F, HONDA CRF150R, HONDA CRF230F, HONDA CRF250R, HONDA CRF250X, HONDA CRF450R, HONDA CRF450R, HONDA CRF450X, KAWASAKI KDX220R (for competition), KAWASAKI KLX250R (Competition), KAWASAKI KLX300R, KAWASAKI KX100, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX80/II, KAWASAKI KX85, SUZUKI DR-Z400S
No, because the shape of the stop-lamp does not turn on.
I bought it because it was a product that fit XR250 (MD30) 1997....
It fits, but the brake lever doesn't have a protrusion underneath and doesn't interfere with the stop-lamp, so the lamp doesn't turn on.
It's okay, I have Rear brake... (sweat)
It's a shame because it works fine.
View detail
There was nothing nice about it
The Mirror was rattling and the image looked distorted and uncomfortable
My elbow hit the Mirror and shattered it easily Naturally, no Repeat purchase
I don't know if there was a quality control issue with Rose, as others have rated it surprisingly well But it was not a good product anyway
View detail
Fits: HONDA CRM250R, HONDA CRM250AR, HONDA CRM250R, HONDA CRM50, HONDA CRM50, HONDA CRM80, HONDA CRM80, HONDA FTR223, HONDA SL230, HONDA XL Degree, HONDA XL230, HONDA XLR125R, HONDA XLR250, HONDA XLR250 Baja, HONDA XR230, HONDA XR230 Motard, HONDA XR250, HONDA XR250 Baja, HONDA XR250 Motard, HONDA XR400 Motard
Can not attach to CRM50.
Adjusting bolt was not attached with the difference from the photo. If you install it as it is, Brake has settled and it is not playing anyhow. Because returns are also troublesome, I pushed Cylinder pushing part by about 3 mm and installed it, but there is still little play and Lever is far so I am planning to cut it a little more.
Regrettable though there was no problem if Adjusting bolt was attached.
View detail
Movable - I bought it because I will fold it ....
It is nice to have a joint and move, but its turning over causes the disappointing joints and strength of the mounting part. Tighten the axis Screw of the joint part - Even if the mounting part is tightened tightly, the strength is not as good as the OEM Product and it has a certain visibility and degradation of the resin part - Where the useful life is concerned. Strength - If the price increases by raising the texture OK! I will buy it again. View detail
Although it is satisfactory in price, there are individual differences that the making is cheap.
Title It's that strange, I knew that it would shake with vibration, but how about shaking from such a low speed - - -
60 km by brand new / I feel that it does not reach the reaching point as a practicality slightly to be blurred at the h position.
This one was still a good one.
View detail
Cospa is good
Cost I think that performance is very good, but making details and creating mirrors is not good.
Because it is mobile type, I assumed it at the time of falling and purchased it.
View detail
Price suitable
The price is reasonable.
Making is complicated.
Although Nut surely did not stop it,
Because I can use it I did not return it.
One Mirror returned because the distortion of the reflected image was bad.
View detail
Price suitable
I think that it was suitable for the price. Making is not good.
Mirror seems to be somewhat distorted, and the image reflected in Mirror gets slightly distorted.
Also, it is hard to see because it can be shaken by vibration while driving.
I think that you can reduce Damage when falling because it is mobile.
View detail
It will be cheap.
Buy for folding Mirror for forest road purchase. I am happy to be able to collapse but it is quality as it is price. Wear is worried because the moving part is resin. Mirror breaks during normal use, so it is difficult to check. Since the moving part is loose, I was licking when I tried to pierce the hexagon so as to tighten it. It is troublesome to return and exchange each time, so I will use it as it is.
View detail
Although the Mirror was another installed from the first, since there was only nothing uncool (what it has in the comparison to the front), that old was exchanged. The Size up also of the Screw is carried out to 6 mm, and intensity is also enough. It was
Although the Mirror was another installed from the first, since there was only nothing uncool (what it has in the comparison to the front), that old was exchanged.
The Size up also of the Screw is carried out to 6 mm, and intensity is also enough.
It was able to interfere in the
problem with wiring which has come out of the Switch, and was not able to stick it to a Switch box.
Those who are bought need to check a self-vehicle.
This is whether the horizontal division was better although it was vertical division.
since
Mirror fixing position becomes high, height on either side differs -- although it will come out and become empty if it cares.
View detail
In order to make the position of a Mirror on either side parallel, it purchased, but it will be meaningless if not attached for opposite. It was slightly serious to have interfered with the pure Parts of the circumference of , as a result a Handle, a
In order to make the position of a Mirror on either side parallel, it purchased, but it will be meaningless if not attached for opposite.
It was slightly serious to have interfered with the pure Parts of the circumference of
, as a result a Handle, and to have tightened a Screw.
View detail
Since it was hard to use the Mirror which the former Owner had attached, it exchanged. The Off-road mirror was examining the thing which can be folded up easily. Since it was called the handy price, this product was decided on, but i
Since it was hard to use the Mirror which the former Owner had attached, it exchanged.
The
Off-road mirror was examining the thing which can be folded up easily.
Since it was called the
handy price, this product was decided on, but if it actually attaches, it will blur in the vibration under
run, and it is hard to carry out a back check, and feels.
although the Screw of the
joint portion was tightened and a few became good -- the function as a Safety Department article --
-- it is felt low.
If it can fold up easily but at the time of an off-road run and becomes a pavement way, the point which is made immediately as for
carriage return is satisfactory.
View detail