Reviews
Installed on CRF125F
I installed it on a Honda CRF125F that I usually just ride along the riverbed.
The NORMAL Heat Guard was removed after a few rides with the weld surface flaked off.
I searched for an alternative Universal Product and found this one.
Since it did not match the position of the NORMAL hole on the CRF125F, it was installed by wrapping it directly around the exhaust pipe with a band.
It seems to be able to hold up surprisingly well and do the Heat Guard's job well.
It looks better than NORMAL and I am satisfied with the Large change.
View detail
Exhaust pipe stepping stone injury prevention
I installed this Guard as a measure to prevent mud stains and scratches from stepping stones on the exhaust pipe. I am satisfied with the workability and cost performance of the Guard.
The only complaint is that the paint color of the Guard adheres to the exhaust pipe. Although I have some dissatisfaction with the product, I am satisfied that I have achieved my goal.
View detail
Too strong to bend. (Lol)
I bought it to bend and install it on the exhaust pipe of the Left Side of my YZ250FX, but in the end I installed only the Clamp.
Well, it's good because it prevents the Moto pan from melting on contact with the Motorcycle when pressing the Motorcycle with the Saka.
The cover is sturdy like an OEM Product, and the Clamp is equally sturdy and probably Material:Stainless steel is rust-resistant and has a shiny and beautiful appearance.
View detail
I installed it in the Mega bomb with no additional parts
I'm not going to mention its performance as a Heat Guard since it's known
This time I tried to install it on the Mega Bomb
It was not possible to install it as it was, but I bent it to widen the Band attachment part of the Body By the way
I was able to install it with the Band that came with it
View detail
Advantage over Carbon
I installed it on DJEBEL 250 XC.
I tried installing ZETAUniversal Type, but it was not suitable for DJEBEL which was not bone and I installed this product.
Because it was thin SUS so I thought that the heat will definitely be transmitted and it will be cocksin
- Pasting heat-resistant cloth on the back side
- Installation of Yamaha OEM Parts Number Exhaust Pipe Guard Washer
Heat resistant Washer of Yamaha OEM emphasizes heat resistance like muffler? Gasket. Combined use is quite Recommendation.
Since it deviates by 10 mm from the installation pitch of DJEBEL, it was widened in width with the gold tool attached to One Side, and the jumping-out from Exhaust pipe was adjusted to the same height as OEM.
The supplied Band is too large for the DJEBEL and other thin model of the Exhaust System. I bought SUSBand at 100. The width of the Band is also narrower, and the degree of freedom of installation is also up..
It is a simple SUS board with a shape, so at least I want you to lack heat-resistant Washer like ZETA.
View detail
If it was installed as it was it was rather hot.
I attached a Titanium Exhaust pipe to the XG 250 TRICKER and purchased this Protector as a danger if I touch it.
Installation is easy, but the attached Band is long, so treatment such as Cut is necessary.
It is apparent that the XG250 TRICKER is Slim and it seems like a little protruding...
Since it is protruding again, it became easy for the leg to hit Protector.
It is better than touching the Exhaust pipe directly, but again Material : As Stainless Steel, Protector itself gets hot...
Therefore, when I pasted Heat Seat on the back of Protector, it did not get hot so much and it felt a good feeling.
View detail
Since a pure Heat guard could not attach with the Torque head pipe of the Delta, after wavering with Z-CARBON, the price was lost, and it purchased here.Since it was general-purpose, it was unavoidable, but since EX Pipe was thin, pains was taken over pro
Since a pure Heat guard could not attach with the Torque head pipe of the Delta, after wavering with Z-CARBON, the price was lost, and it purchased here.Since it was general-purpose, it was unavoidable, but since EX Pipe was thin, pains was taken over processing of the surplus Clamp.After all, it cut.I think that appearance may be felt refreshed. View detail
He wanted to attach the pure protector of DR-Z400SM to the power bomb of FMF, and bought this. What were used is only a band and a bolt. The protector part did not use. unexpectedly as good a thing as buying a band single article ordinarily --
He wanted to attach the pure protector of DR-Z400SM to the power bomb of FMF, and bought this.
What were used is only a band and a bolt.
The protector part did not use.
unexpectedly as good a thing as buying a band single article ordinarily -- or -- Since it is high ... if this is used, a pure heat protector can be used about.
the protector of this very thing came out fluently, and its texture was not quite satisfactory.
I think that it is structure of a price.
View detail
Since the inner side of a right leg melted with heat, it wound around EX pipe. Cutting is also easy.
Since the inner side of a right leg melted with heat, it wound around EX pipe.
Cutting is also easy.
View detail
The torque head pipe of the delta was equipped. Since the stainless band of attaching is long, it is necessary to cut depending on a pipe diameter. Moreover, since heat insulation packing is not attached, as it is, it has heat.
The torque head pipe of the delta was equipped.
Since the stainless band of attaching is long, it is necessary to cut depending on a pipe diameter.
Moreover, since heat insulation packing is not attached, as it is, it has heat.
View detail
The form where pants do not need to melt now, either is also smart.
The form where pants do not need to melt now, either is also smart. View detail