Reviews
Cheap, strong, rustproof
This is the same Parts that helped me when I was riding WR250.
By the way, I'm haGap from checking WeBig's compatibility, but CRF250L M RALLY50 MD44 will also fit, 44-47mm will fit, I will let you know.
I purchased this product in conjunction with the purchase of YOSHIMURAExhaust pipe.
As expected, the OEM exhaust clamp was rusty and rusty when removed.
Bolt broke.
I bought it on Amazon Prime, so I placed the order in the afternoon and it arrived first thing the next morning!
View detail
I like this one.
I use this one every time.
In this case, it is used for yz85 Silencer.
It is a moderately sized product, but it is Large sturdy without wrapping all the way around.
View detail
Fits: KAWASAKI D tracker, KAWASAKI D-TRACKER-X, SUZUKI DR250R, KAWASAKI KLX250
Texture.
Great texture.
I think it's hard to install if you don't have any experience.
View detail
Exhaust pipe protection
I installed it to protect the exhaust pipe of SEROW250 and to dissipate the heat.
The material is aluminum, so it can be bent and adjusted.
I am a little worried about the durability of the hose band since it is fixed with a hose band, but I will be observing its durability.
The coloring of Aluminum is also very Gun meta-like and austere.
View detail
90mm is Exactly for Replacement for MORIWAKID9/L87Spring.
I am using MORIWAKI's Slip-on Silencer on my VTR-SP, but the plating of MORIWAKI's Exhaust Spring (D9/L87's caterpillar type) is weak and rusts a lot. The plating of MORIWAKI's exhaust spring (the caterpillar type of D9/L87) is weak and rusts a lot.:Unavailable for about 2pcs.
I thought it would be better to replace it, but the MORIWAKI Exhaust Spring is expensive, and even if I replaced it, it would rust again soon.
Even if we were to replace it with another company's product, there is no Exactly choice because of its subtle 89mm length and exquisitely not-too-stiff tensile strength.
So, after much research, this DRC 90mm was JUST what I was looking for. It is JUST the right feel that can completely replace it.
Quantity:1 Set of 4pcs. and the price per piece is almost half of MORIWAKI's price at the time of review.
Black chrome plating seems to be moderately rust resistant and has not rusted at all in the two years since I purchased it.
However, I can't guarantee that it will be better than MORIWAKIOEM in terms of corrosion resistance, although I can't guarantee it since it hasn't been driven much during this period.
Also, there is no resonance prevention rubber, but there is no abnormal noise with respect to the VTR.
The only drawback is that it is slightly thicker than MORIWAKIOEM (maybe 1mm thicker) and its glossy black color is quite noticeable. No one but me cares about Level, though.
If you can tolerate that, I highly recommend this product.
View detail
Fits: HONDA CRF250 RALLY, YAMAHA WR250R, YAMAHA WR250X, YAMAHA YZ450F
Required Items for Silencer Replacement
It is an essential Items when replacing Silencer,
When newly fitting the exhaust pipe, install it on the exhaust pipe side rather than putting it in the silencer side.
I think it would be smoother to put the Silencer side over the Silencer side.
View detail
muffler pipe clamp
Bought 2. I broke the original FMF muffler clamp as it rusted, this clamp did not rust and holds perfectly as it should Perfect for securing a secure seal between the muffler and the header pipe. Much better than typical hose clamps. I strongly recommend. View detail
It was rusty!
This is the spring replacement of SC40MORIWAKITitaniumium Exhaust. This part is prone to rust due to its location, so we purchased a durable DRC spring. I purchased an 83" length spring, but I would recommend a 90" length spring if you are replacing the spring in the future. When I took the measurements, it was exactly 90", so I thought that 83" would be Large sturdy (could pull about 7"), but it was quite Large and odd (with muscle aches after the work, lol). View detail
Fits: KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI KLX150
With especially no problem
With especially no problem View detail
Exactly to FMF
Used for FMF exhaust pipe.
The Large is perfect and does not get hot, so it will not burn clothing on contact.
The product is not bad looking, and I think it is functional & well-designed.
View detail
Installed on DG32JXG250 TRICKER
I replaced the exhaust pipe with a Specht exhaust pipe and the OEM Heat Guard moved outward a bit. Sometimes Jeans gets hot so I change it before I get burned.
As you can see in the picture, the heat seems to be avoided as it is back to near normal exhaust pipe.
The length seems to be more than 5cm shorter than Normal heat guard, but I think it's OK at first.
I like the looks of the NORMAL better, but I think this is the one.
View detail
It is still good for accuracy and tightening to a perfect circle.
Yes, my Yoshimurars-4J is currently struggling with exhaust leaks, but I found out that the clamp on the mid pipe is not properly tightened to a perfect circle.
So my wife picked up a Barrel4 before. (Already disposed of) I bought this clamp to eliminate the cause of exhaust leak one by one because this clamp was very good when I installed
View detail
Material:It's Stainless Steel and it's beautiful. Great accuracy too.
For some reason, my wife picked up the lightest Barrel4 from somewhere and brought it home to use on her WR250X for course riding, but it didn't come with this clamp, so I bought it. The stainless steel is beautiful and the accuracy is good. I was able to install it safely. The only thing is that there is no Baffle like for Race before the regulation, so the sound is super explosive. Inner baffle is next. View detail
Fits: HONDA CRF250 RALLY, YAMAHA WR250R, YAMAHA WR250X, YAMAHA YZ450F
DRC EXHAUST JOINT GASKET
Thank you, WEBIKE! I didn't think I would ever find the right part. This exhaust joint gasket fits the Delta Barrel 4 Exhaust. I didn't have a caliper to measure the exact fit of the exhaust joint and they smash after use. So I didn't know the actual size I needed. It was proving quite difficult. My exhaust wouldn't fit without it. I now have it am I'm very pleased with the product. Thanks again, WEBIKE. View detail
I processed and installed it.
I machined and attached it to the BEAMS front pipe.
The standard Guard melted the hem of the Pants.
Since it is a commuter main, I decided to float it from the pipe to increase the effect as Heat Guard.
Do not use the supplied band, use the screw holes on the Exhaust Guard that comes with the front pipe.
I used the holes in PipeGuard as they are on the front side and drilled holes in PipeGuard to secure the rear side.
The front side is gradually bent at an angle to match the curve of the exhaust pipe and the rear side remains straight.
The Guard is all floating from the Pipe.
I've run it on the road and it doesn't seem to have any problems with vibration.
View detail
It's better than the OEM Guard.
When I replaced it with the 4 Strike Competition Exhaust Pipe of RSV, I installed it for the purpose of heat protection and shielding.
important item
[Was there anything that disappointed you?
It's not a disappointment, but since you can cover a wide range of the exhaust pipe, the Material:It's a little disappointing that the beautiful burn color of the Stainless SteelExhaust pipe is hidden from view.
Do you have any wishes or improvements you would like to make for the Manufacturer?
There was nothing in particular
[Do you have any products to compare it to?
The Exhaust Pipe Guard for 2Cycle is too large and expensive, so this is the only one I could find.
Frequently Asked Items
What made you decide to buy?
As a 4Cycle exhaust pipe UniversalGuard, I bought it because it is the cheapest and longest I have ever seen and it can cover a wide area.
Was the installation difficult?
There is a method of attaching the guard directly to the exhaust pipe, but it does not work for the purpose of heat shielding because the heat of the exhaust is transferred to the guard, so you can install the guard away from the exhaust pipe in the same way as the OEM. Quantity of the ReplacementMount Kit (item number:ZC31-3901):I used 2 sets and installed it. Technically, there is nothing difficult, but because the clearance between the engine cylinder and the exhaust pipe is narrow, I had to use my head to decide the position of the Band and the direction of the Screw to attach the Mount to the exhaust pipe.
【Please tell me the installation point and hang】
Guard is Material:Because it is aluminum, it can be bent to some extent, but extreme bending is not possible, so it is necessary to decide the position of the Mount so that the Guard will fit the shape of the exhaust pipe well.
How was your experience with it?
By using the Mount Kit to mount the guard away from the exhaust pipe, the heat from the exhaust pipe is not transferred to the guard as it should be, and the temperature is high enough that you can touch the guard with your bare hands without getting burned.
[Was the Instruction Manual easy to understand?
The instruction manual is not included, which makes it even more important to have the proper knowledge, skills and tools is required
[Included Parts:were they on?
Stainless Steel Band for Exhaust pipe installation is Quantity:2pc. Set was on.
View detail
Sounds good!
This is used for the connecting part of the front pipe and the rear piece of WR250X. The system is Full titanium of beams. I change it periodically because the heat gnaws the threaded part of Clamps when I take it off and on many times in maintenance.
It is better to apply anti-corrosion grease to the stainless steel parts. If you don't apply it, you'll have to wait until the next time you take it off. (Lol)
View detail
I'm not getting hot
Installed on YOSHIMURAExhaust System Up Type
Before the installation, the base of the exhaust system was so hot that it melted the Pants, but it was He was wearing it, so it doesn't seem to matter
View detail
FMF Mega bombThailandThey are just the right size for a large portion of the bomb
I bought it to fit the FMF Mega bomb At first, I put it on the back of the Thai Co-part and on the part that interferes with the raising and lowering of the legs (Band is best for this part of the exhaust pipe, which is of uniform thickness.) However, the Heat Guard that came with the Normal muffler was replaced by the Grinder Cut the Heat Guard of the DRC to the length of the machine and put it on and move it to the Thailand part It's a barrel shape It's a barrel-shaped, so the band is a bit like a "C" shape, but it arrives somehow I was able to cover the whole thing Takana … I think View detail
That's pretty good!
When running a Dirt, the exhaust pipe is full of small stones, etc Installed
It is easy to install because it can be bent along the curve of the exhaust pipe
It's good for dressing up as well as protecting the exhaust pipe
View detail