Reviews
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Texture and satisfaction
I think that the texture is also good, but because the Tank to be installed is not yet delivered, I do not know the feeling of installation
It looks good.
Since it is said that it can be adjusted to Earl of Tank, wait for it as it can only be bent at the time Tank came..
View detail
Fits: KAWASAKI Z125 Pro, KAWASAKI Z125 Pro
If you choose it with Cost this is the only one
It is good to be able to attach. No special Wiring or processing required. However, exactly it is not an Oil Temperature Meter, and the Thermometer inside the Crank case. Since it is not at actual oil temperature, it is necessary to take Data before installing Oil cooler. It will be used in places where Large bodies are recommended. No need for Motorcycle not to Overheat. View detail
Fits: HONDA MONKEY, HONDA C50, HONDA C70, HONDA Ape 100, HONDA Ape 50, HONDA cubic series, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Super Cub 90, HONDA dachshund, HONDA C50, HONDA C70, HONDA Ape 100, HONDA Ape 50, HONDA cubic series, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Super Cub 90, HONDA dachshund
Oil temperature management in summer
Yoshimura head115 Bore up Oil cooler and Reinforced Oil Pump were installed, so we decided by installing Full scale 140 - Degrees and Glycerin as compared with D company because we installed the oil temperature carefully.
I think that installation is easy and I think that it will be a measure of oil temperature management, as a hope I wish Level gauge to calibrate like OEM?
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Texture and satisfaction
The packaging method is also good, the thing itself is very satisfied with the texture very well.
Tank to be installed has not arrived yet but I am looking forward to it.
I am satisfied that it can cope with changes such as installation position etc..
View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI Zephyr 400
It was diverted to Z 900 RS
Because I do not like DOHCLogo, I chose Kawasaki Logo and diverted it. Of course, since Bracket hole position does not match, it is completely installed and opened View detail
It is Cool!
Previously I was wearing Seat of PMC, but Z2Spec of DOREMI COLLECTION. There was a delicate gap in the place of Seat Cowl and desorption was hard and it was Large strange, but DOREMI has no problem.
Just a little worried that Bolt is hard to tighten when installing Belt.
But I'm satisfied with the price in a big way!
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI W400, KAWASAKI W650, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 400, KAWASAKI Zephyr X
DOREMI Oil Temperature Meter
beautiful, inexpensive, easy to install, as you wish decreased at first It's fixed now, it's not gone. Beautiful, inexpensive, easy to install as soon as you wait. First off, some. This is not going to disappear.(translated by Google Translator)と View detail
Do not need casual Accent tool ♪ easy ♪ to prevent Rust?
The Z900RS has a hole in the Main frame.
One Side 3 places, perhaps Quantity : Pair (for Left and Right) I think that it is symmetrical.
In NORMAL, in the upper two places Material : Plastic's Cap is addicted and there is nothing in the Large pit hole near the footpeg.
From the time of car delivery "In this hole, I wonder if it is Rust ? ? ? Sometimes I was concerned and I tried to buy it carefully.
OEM Material : You can easily remove Cap of Plastic with your fingers. You can also get this item by hand.
I painted Silicon grease thinly on the O-ring when I put this product in a hole.
I wanted to snuck into Smooth, it is a good spirit that does not rain.
A Cap that has good logo of DOREMI COLLECTION is one One Side and it is used for the part of the Large pit hole near the footpeg.
I like it because it became a casual fashion at your feet ♪
To be honest, I will be happy that it is more cheap, because I only need two places of holes without OEM resin Cap.
View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI Z1000R, KAWASAKI Z1000J
Very ordinary Grommet
Although it is for another car model, I purchased this Grommet as Size matches. quality ? Accuracy etc. There is no problem at all, it can be used normally. When attaching to the car body, Rubber protector was applied to prevent deterioration, and Silicon grease was applied to the part where the Side cover was fitted. View detail
Plastic part is weak
The protrusion of DOHC will break when fitting.
I installed two of Plating and Black
Both of them broke.
If you do not set it quite carefully you will break easily.
View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr X
It is very good! If you are cheaper you buy more people!
It is a very good touch, and it also has an Accessory Case attached to it so I want to add it quickly! I have not bought Fender Eliminator yet so I'm looking forward to the future. View detail
Fits: Others , KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS)
Ideal for NAKED
I bought two. One will not blur, but the other will break.
Compared to OEM, it becomes Dress-up but visibility is lost.
View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750, KAWASAKI Z1000, KAWASAKI KH500, KAWASAKI KZ650, KAWASAKI KH400, KAWASAKI KH250, KAWASAKI Z900 (KZ900), KAWASAKI Z750, KAWASAKI Z1000, KAWASAKI KH500, KAWASAKI KZ650, KAWASAKI KH400, KAWASAKI KH250
Product that does not impair the atmosphere of the car model and has superior performance.
I am restoring the original parts of the car model well, I think that it is a good product with good accuracy and easy to install. The feeling of use is also good, I am doing a lot of trouble. View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Good Items to Imechen!
I do not like the OEM's Grab Bar so I should make it Z2 sheathing ... But it is perfect for those who liked the exterior of ZEPHYR 750! I feel that I did not feel discomfort so much (^^) View detail
I am satisfied..
Although I wanted it from before, I was hesitating because it is not cheap at all, but he never purchased his will. When I looked at the figure after exchanging, although I was dissatisfied with the construction in part, I am satisfied with the Large. Thanks to webike for purchasing OEM Parts Number and various other things you can buy Point as well as worth using
I did it..
View detail
I wish I had a single item sale.
In the past, I attached the Kawasaki version of Plating, but I changed it as I changed Bracket to Black. You can not hide the Bracket completely unless you remove the OEM Light Optical Axis Adjustment. I seem to be dissatisfied with installing characters by myself, but I do not think that it is time and effort.
View detail
Fits: KAWASAKI W1 S/SA, KAWASAKI W400 (W1S), KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100
It is good !,,,,
The item is good..
It is definitely good..
However, when installing to Bracket it does not enter unless it is pretty stiff.
It would be easy if you cut off the Blinker side or the Bracket side, but ...
Instruction Manual is not included.
View detail
I think it's good..
It was the last one in stock. Image changed to Large, so it was good so I will not care about the details. Burning stories should be helpful for those who purchase!
(The processing of welding of Tank of the part which hides in Seat is not good, the painting behind Tank is textured, the line sticker has steps). )
View detail
Cool
OEMTank was originally scarred, so we chose DOREMI COLLECTION daringly this time! Atmosphere the atmosphere has changed! The Cap part struggled hard during installation. It is saved when there is Instruction Manual a little more obvious overall. It was good as it was shipped immediately after placing an order
View detail
To ZEPHYR 400 χ.
In the meantime it will be an impression with a temporary attachment.
I was worried whether I could get it properly with χ. According to the result, it was attached with processing degree of Rubber.
I think that it will fit if you narrow the width of the Tank guide's Rubber or Penetrating the hole. We can process with the tools like Nipper and Cutter.
This will be a special case. In my own
Because Plug cord was wearing NGKRACING 's StraightCap, putting DOREMI' s Tank is in Right
Fuel Sensor is slightly lower than OEM (Close to Head) So it comes in contact with the Plug cap and the Plug cap gets somewhat overwhelmed.
Although it may not be a problem even if it remains as it is. I and the same Spec. I think whether to prepare Cap of L-type as a safety measure. (I do not think I will make contact with OEM. )
Wolani's Coiletc. Because I changed it to that, I was worried about the restraint, but it fitted properly without processing.
View detail