Reviews
Fits: KAWASAKI Z2 (750RS), KAWASAKI 350SS MACHII (S2), KAWASAKI 400SS MACHII (S3), KAWASAKI 400SS MACHII (S3), KAWASAKI 500SS MACHIII (H1), KAWASAKI 500SS MACHIII (H1), KAWASAKI 500SS MACHIII (H1), KAWASAKI 500SS MACHIII (H1), KAWASAKI 750SS MACHIV (H2), KAWASAKI 750SS MACHIV (H2), KAWASAKI 750SS MACHIV (H2), KAWASAKI H2, KAWASAKI KH400, KAWASAKI KH500, KAWASAKI W3/650RS, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z650 Zapper/KZ650, KAWASAKI Z750
The old and torn dust cover was replaced at the same time as the brake hose was replaced.
I also replaced the dust cover that was torn while replacing the brake hose! I am satisfied with the quality. View detail
Great piece
I'm very impressed and happy with the fork emblem. It is good quality and well built. I wish Kawasaki had installed these as standard equipment on the Z900RS. Thank you Doremi! View detail
It can be used for ZEPHYR750.
The Long Type for ZEPHYR750 is discontinued, so the Super Long Type is available in a different size. to no avail, but I was able to use it without any problems, just a little longer.
Also, the lion part to be held by hand is smaller than that of the "Normal" model, so I felt that a longer lion part would be easier to use for opening the seat lock.
View detail
GPz 900r Tank
After trying to repair a 34 yr old tank I gave up and bought this tank. Only new tank I could find for a Gpz. Was worried about the cost and getting a cheap quality inferior tank. Arrived in 7 days from payment to front door, Overall build is very good and packaging was good, some minor surface corrosion at the fill cap that cleaned up easily. just need to get it painted now. View detail
Easy installation
Installation is easy and can be done by anyone.
The letters "KAWASAKI" look like the Material of the Plastic model.
You have to look quite closely to see it at all.
In general, I think it is a good ITEMS.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS)
For w650.
The rear brake of w650 was not working well, so I diverted it.
Stroke is larger, but works better.
View detail
Fits: KAWASAKI Z1000 MkII, KAWASAKI Z750FX
Now you're safe.
Exactly. mk2 was in this
I bought a lock washer for z1-z1000 a while ago and it was a failure, so this is a relief!
View detail
Kawasaki Z900rs fork cover
Quick delivery & makes the front end neater after fitting twin horns. The fixing screws are silver but I sprayed them black to blend in. View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI ZEPHYR1100
ZEPHYR400
I had the same suspension before, but it was rusting badly, so I bought it this time. The finish is very convincing, partly due to the extensive use of plating. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS)
first exchange
I replaced a Rubber that probably had never been replaced since it was born.
Just by getting on the footpeg, the squishy feeling is gone and I can step on it firmly.
I am happy with the footpeg position back to normal. I'm already using Quantity:2pc. I am going to buy a Set and replace the Rubber on the Right Sidefootpeg as well.
View detail
Excellent finishing touch to my bike
This fork cover is just like the ones fitted to the old bikes back in the day. Fitting is super easy and is a five minute job, then stand back and admire how the ugly horn is now covered up with a lovely shiny chrome cover with Kawasaki in the original script..just like it should be! The price was very reasonable and quality high. Shipping to UK was good too - inside two weeks via standard Japan post. Well done Webike! View detail
I'm on JC92.
It is diverted for Z900RS.
The O-rings are sufficient.
I look forward to comparing this in mid-summer and mid-winter.
In the middle of winter, it feels like it's probably only getting up to about 60 degrees.
With this attached, it will be properly managed.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Tuck Roll Seat for Z900rs DOREMITail
[How is it used?
Currently in use
Was the one you received as per Image?
The design is different from the Image image, but the design has one point such as Rivet, and I am satisfied with the Large change.
Was the installation difficult?
Installation is easy:a Tandem belt is included and the mounting holes need to be drilled with Drilletc.
How was your experience with it?
The same spec. as the Normal seat, so it can be installed with in-vehicle tools without any problem.
[Included Parts:were they on?
Tandem belt was included.
[Was there anything that disappointed you?
None in particular:??
Other items that would be helpful
The cosmetics are good in every way.
The fittings are superb, as they are for DOREMI's Tail.
The thickness is different from for STD Tail and there is less Damage to the buttocks. In addition, it is especially recommendation for those who want to put KAWASAKI letters on Z1Type Club bar or Seat.
View detail
Always believable DOREMI
I always buy DOREMI products because I believe in technology.
Again, it was a Large hit, and I was more than satisfied with my expectations.
Replaced old Harness with new Harness and no electrical trouble.
It's been running fine so far.
View detail
CAFE requires additional Bracket
Installed on Z900RS CAFE
CAFE cannot be installed without an additional Bracket.
I found just the right Bracket at a nearby Home center.
We took advantage of that and installed it.
Quantity for Vertical:2pc 1 pc for horizontal
Quantities bought at the root of Optical Axis Adjustment Bracket:The two brackets are vertically tightened together, and another short bracket with a long horizontal hole is attached horizontally under the bracket, and then DOREMI's bracket is attached to the bracket to create a center.
If I recall correctly, Horn's Bracket also needs to be displaced.
It takes a little time and effort, but it is fun to install through trial and error while thinking about it.
Right now we are installing DriveRecorder's FrontCamera on DOREMI's ForkEmblem's Bracket.
The image was blurred due to vibration when the car stopped, so the upper part of the optical axis bracket and the ForkEmblem Bracket were fixed vertically with an inHemp palm.
The appearance of the FrontCamera is perfect without being too noticeable.
View detail
It could have come with OEM.
Levels that could have been included in the OEM
As it is, it is embarrassingly unseemly, so it is a standard DOREMI.
View detail
Large letters in Plating
I wouldn't use it if it had DoubleHorn all over it like Honda does, but it's a ManufacturerNORMAL.
I would like to see this type of thing installed.
It looks dumb without it. Personally, I think Plating is better than Black.
CAFE seems to have a different Bracket. They said that if it is not attached on the lower side, it will interfere with Cowl.
It would be normal to have this.
View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
It sticks well without processing:??
Installation is very easy:??
Looks a lot better Parenthesis ??
Recommended for an introduction to Custom. It is cosmetically good. ??
View detail
The purpose is to dress-up
I do not intend to control the oil temperature, but to dress-up the oil. In that sense, I am satisfied with the product as shown in the Image. I have only driven about 200 km, but there are no oil leaks as described by others. By the way, the temperature display was about 90-100℃ in winter (I don't know if this is correct or not). View detail
Nice piece
Very nice Doremi quality piece perfectly suited for my anniversary Z900 RS. Assembly without problem, you just have to remember to order a new seal for the cover. -------------------------------------------------- -------- Very nice Doremi quality piece perfectly suited for my Z900 Rs Birthday. Mounting without problem, you just have to think about ordering a new seal for the lid. Powered by Google Translator View detail