Reviews
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
The front is tightened.
It makes the front area look tighter and cooler. But if you look at it close, it looks cheap. View detail
whether it is there or not
It's been more than 2 years since I started riding the Z900RS
After all this time, I feel lonely around Front fork.
I put it on for a change.
Honestly, I don't care if it's there or not, but if it is, it's more or less there.
"KAWASAKI" The loneliness around Horn is marked by the letters
It feels like a reduction.
Installation is before mounting on the vehicle body. "KAWASAKI" and then take the BALI character of
It is necessary to fit into the plate, but it is easy to do.
It doesn't take much time.
In my case, there was some interference with the Horn when I installed it on the car body.
It was necessary to cut CoverBody with File, but it was not a problem.
GoldThe price is cheap compared to other companies' products of the same kind.
If you don't mind, I think I can recommend it.
View detail
High degree of difficulty in installation. Self-responsibility.
In the first place, I saw this used CB1100RExterior Set of DOREMI COLLECTION in person, and decided to return after 10 years.
I found a used RS car that met my requirements at the end of December 2020, so I ordered it; it arrived at the end of May 2021.
As expected, it was not easy to install. The accuracy of the parts is not good and there are some mistakes in the installation manual.
If you can't Rose the NORMAL exterior, ask the Shop to work on it.
After assembling the bike, we adjusted each part of the bike while test driving it, and repeated the process of rosing and assembling the bike many times.
However, when I think that the assembled car is in Garage, I forget the hard work until then.
I'm sure you won't be able to buy one soon, so if you're having trouble, please do so now.
I'm planning to post some blogs and videos about the process.
View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000
Improved starting performance
I bought it from Kawasaki old for Vehicle. The mileage was exchanged from the faded Coil which passed nearly 50 years though it was not that much. Before the exchange, afterFire Ya at the time of starting, Cubri of Plug had occurred, but after Coil exchange, the startability also improved. Because the connection Cable is considerably long, the length is adjusted, and the Plug cord also adjusts the length according to each cylinder. Because the cover is short, I buy it separately and use it. View detail
Fits: KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z900 (KZ900)
Better starting performance.
I bought it from Kawasaki old for Vehicle. The mileage was exchanged from the faded Coil which passed nearly 50 years though it was not that much. Before the exchange, afterFire Ya at the time of starting, Cubri of Plug had occurred, but after Coil exchange, the startability also improved. Because the connection Cable is considerably long, the length is adjusted, and the Plug cord also adjusts the length according to each cylinder. Because the cover is short, I buy it separately and use it. View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z750FX, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI Z650, KAWASAKI Z400FX, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI Z650, KAWASAKI Z400FX
I want to make it Zedd TwoSpec.
I bought this to convert my ZEPHYR to Zed TwoSpec. It is easy to install and I like the DOHC letters. View detail
I just wanted to ride the FX again...
Because my first car was Z400FX, I wanted to ride again. I made ZEPHYRχ to FXSpec. by the thing that there was no skill of the maintenance to maintain. If I close my eyes to the details, I am satisfied enough.
I dare say that Neck is a pity that the remaining quantity display of Gasoline meter does not huddrill.
View detail
Fits: KAWASAKI Z900RSCafe, KAWASAKI Z900RSCafe
If you're not careful, you can get a
It makes the Front look like an old car. I bought it because I had it in stock though there is it from another company.
I felt like I was making a Plastic model because it is Plastic.
In the middle of touring, I took a bug and it was gone in the next place.
Then I bought another one and glued it on, but it turned white…
It's cheap and you can do a lot with it.
Installation is easy. I changed the Horn + relocated it and it's not wobbly.
View detail
Highly recommended for cost effectiveness and satisfaction.
Installation is very easy.
All you have to do is fit them together like a letter puzzle.
The fit is tight, but I applied a very small amount of glue just in case.
I had to bend the bracket a bit to accommodate the Fork Cramp.
I think the most famous ones are DOREMI COLLECTION and PMC.
The method of fixing Emblem and Bracket is different.
DOREMI is Hexagon Nut and PMC is Well Nut.
View detail
ใด้รับของแล้วครับแพคกิ้งดีมีกันกระแทก คุ้มค่า สมราคา View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z750FX, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4)
Generator Gasket
It arrived earlier than the expected delivery date.
I haven't installed it yet, so I give it 3 stars for durability, but I think the price is reasonableRecommendation product.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
The texture is good.
I replaced the OEM Handlebar Switch as it was deteriorating and the quality is good as it is an Aluminum Diecast.
If you are familiar with old motorcycles, you will feel comfortable with the controls, but if you are a young rider, it might be a hassle (lol).
The Throttle holder can be used as is if the interfering parts are cut with a cutter.
It is quite difficult to replace the Accelerator Wire without removing the Carburetor.
View detail
Fits: KAWASAKI Z2 (750RS), KAWASAKI 500SS MACHIII (H1), KAWASAKI H2, KAWASAKI W1 S/SA, KAWASAKI W3/650RS, KAWASAKI Z1 (900SUPER4), KAWASAKI Z400 (KZ), KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX
Half the price of OEM is attractive
The Blinker was damaged by a fall, so I bought it. OEM is also sold, but I was attracted by the cheapness and decided to buy DOREMI. The appearance is the same as OEM, but the inside is different from OEM as shown in the picture. I like it because it is cheap, but it is not suitable for people who are particular about it. View detail
DOREMI 6V MONKEY/GORILLA Main Harness
ZEPHYR750 Initial Model 6V MONKEY/GORILLA Main Harness has been discontinued, so I bought this one.
It's a quick and easy install with nothing standing in the way of installation.
Because the coupler of wiring is different in some places, it is necessary to remove the original coupler and use it, or to connect it with Bullet Terminal.
I'm not an OEM, so I'm not sure if this is something I can do.
Processing may seem difficult for those who have never done it before, but if you've done it before, it's easy to do.
View detail
Fits: KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYRX
At this price, it's a buy.
I'm surprised at the price. At this price, you might want to wear it on many things. The texture is good, so people are surprised when I tell them the price. The letters are cut off with a Nipper and then set up like the plastic model. But you need to be careful about this because it is very hard. View detail
Fits: YAMAHA SR500, YAMAHA XT500, YAMAHA SR400
A little Smallish.
The texture is very nice and the meter part with Oil in it has a nice feel to it.
However, the size of the attachment part is a little small, and the solid part of the Frame sticks out.
If this is the case, corrosion of the protruding part is inevitable.
Maybe I should think about Washer and Packing?
I'd like to see the OilLevel displayed as well, but I'm not sure if I should think of it as FULL half the time.
View detail
Fits: KAWASAKI Zephyr 400, KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 750, KAWASAKI Zephyr X
Fork Cover Emblem and Quantity:I want you to set it
I bought it to install the Fork Cover Emblem on my ZEPHYR750.
The accuracy of the installation is perfect.
But even if the price of the product is higher, you can still add this Bracket to your Fork Cover EmblemBody:I want it to be a set.
I am satisfied with the old car feel after installation.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 400, KAWASAKI Zephyr 400, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI Zephyr X, KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4)
You look like an old car.
I installed it on my ZEPHYR750.
Small Characters "KAWASAKI" The typeface of the
The type to incorporate the character.
Adjust the angle and fix it with Bond.
Mounting Bracket is sold separately.
It is Large satisfactory in the front area.
View detail
Fits: Others , KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4)
There's no doubt about it.
I installed it on my ZEPHYR750
It is used in Short Bracket.
It's good to have a choice of Bracket.
The shape is as good as DOREMIForme, but the construction is not as good as it should be.
I'm worried about the Conecto part of Bracket and Mirror.
Visuality is good.
Cost performance is good, so if it goes bad, you can repurchase it.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
The image changes.
I replaced the side cover emblem on my ZEPHYR750.
OEM The ZEPHYR750. You can change the Image just by changing "Emblem". Personally.
"Fork Cover Emblem. I also changed my car at the same time, so it looks a lot more like an old car.
I just use double-sided tape to attach it, but I had a hard time with positioning.
I used Masking tape to position it, but the side cover is curved, so you need to bend the emblem a little.
It is made of a soft material and will leave marks when used with tools.
Hand Bent is recommended.
The price is surprisingly high and you don't want to miss out.
View detail