Reviews
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4)
Mounted on kz900
I changed only the color of the bolt. I would like to change the exterior someday. View detail
Wow that's cool
I chose this one because I wanted to make it look like an old car.
The OEM Light Bracket could not be removed at all and was eventually disconnected.
View detail
Thank you
I removed the OEMLight & Meter Bracket when doing the LightUp, so I used this Bracket. View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB400SF SPECIII
Good product as long as the connector fits
There are several similar LED Tail Lamps sold by HONDA, AP something, Posh, DOREMI, and others.
I looked at many installation articles and youtube, and Posh was the best choice for me, but it was also the most expensive. Of course, I don't know if they are made in Japan or not, but I was thinking of going with DOREMI because Posh and DOREMI at the top seemed somewhat trustworthy, but then I saw them on Yahoo Auctions at a price that looked like they were made in China, so I bought them. (It was DOREMI no matter how you look at it from the picture and the color of the cord)
It said something like "Connector needs to be replaced depending on the year …" but I thought I could probably pimp it out, but unfortunately, my 2011 CB400SB (NC42-130) had the wrong Connector and I immediately went to AMAZON and I ordered DAYTONAHMWaterproof Connector. (Webike is cheaper, but I needed a Large connector as soon as possible.)
I thought I had done a lot of research to make sure I connected the right way, but when I finally finished and tried it out, I found that the connection was not correct. Stop-lamp won't work!!!!"
Honda Motorcycle is Yellow/Green, Green, White/Green, DOREMI is Red, Yellow, Black... I went back to the Net and checked Q&A. The more I looked, the more exceptional answers came up, and I was at my wit's end. So I called the DOREMI head office and asked them to look into it. (They were very polite!). In the end, the answer was Red is for when you step on the Brake, Yellow is for the Tail lamp that is always on, and Black is for Earth. It is certainly the most imaginative shade. It is certainly the easiest shade to imagine. Then the complication is Honda, but I was able to work that out through research.
I took it apart again and looked at it carefully, and found that the black color of Earth was correct, but the red and yellow colors were reversed.
Thanks to the person who answered the phone at DOREMI headquarters, the Stop-lamp now lights up properly. （Thank you very much for your help on the phone at the DOREMI head office.:(I think it would be great if it was a Set)
I know it's a bit presumptuous of me to post my impressions of the DOREMILED Tail Lamp without having bought it from Webike, but I thought it might be troublesome if someone new to MotorcycleMachine, like me, decides to replace it with this product on his/her own. I thought I'd post my impressions.
The product itself is very nice, with the Cushion Tape attached from the beginning and the same size as the original OEM product. So, I have no complaints about the product itself, but the Connector that can convert from 3Pin connector to HMWaterproof Connector is not available in quantity.:I think it would be perfect if it were a Set.
Blinker about a month ago. [Color] I replaced it with Clear and now the Tail lamp. [Color] Since I decided on Clear, I think the color unifies the WhiteSilver CB400SB and makes it look awesome and fearless. I am very satisfied with the result.
View detail
Fits: KAWASAKI 650RS, KAWASAKI 650-W1, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 350SS, KAWASAKI 400SS, KAWASAKI 400SS, KAWASAKI 500SS, KAWASAKI 500SS, KAWASAKI 500SS, KAWASAKI 750SS, KAWASAKI 750SS, KAWASAKI KH250, KAWASAKI KH400, KAWASAKI KH500, KAWASAKI Z2, KAWASAKI Z1, KAWASAKI KH250
We can only be thankful that we have Parts….
It functions as a Blinker Bracket.
The shape is completely different from that of the OEMBracket.
That's the fate of Ripro products, we should be thankful that Parts is sold.
We do not recommend this product for the finicky or nervous person.
View detail
Fits: HONDA CB750F, HONDA CB1100R, HONDA CB1100 type R-18 inch
Don't seek OEM quality, after all, it's Other Brand Product.
I was attracted by the brand name "DOREMI COLLECTION" and purchased it, but the packing of the Lens is not rubbery but sponge-like. I wonder if it is made in China after all. I tried to re-cut the screw part with a tap, but there was no tap that fit the screw hole, so I re-cut the groove in a different way. Since the product is cheap, it might be better to think of it as a replacement for the OEM one in case of emergency. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z1, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX, KAWASAKI Z900RS, KAWASAKI Z1, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX
Doremi retro round signal lights
About quality and texture Has weight in it. Probably make in stainless steel on the metal part. Plastic cover is hard. About the feeling of use Brightness is enough not too bright and not to dark. Products to buy together I bought the TURN SIGNAL EARTH GROMMET and the TURN SIGNAL STAY(SHORT TYPE) and (middle type for the front) Difficulty of installation Maybe 40 minutes. All rewiring is required. As for the fitting there's no issue. Cost performance and comparison with other products I prefer the look as it's more retro Z2 look. And able to buy individual lamp is one is spoilt or broken. About shipping and packaging Well wrap with individual box. No issues when all items received. Any concerns, cautions, or advice when purchasing WIDE WATTS TURN SIGNAL RELAY Is need for the correct flashing speed. View detail
Fits: KAWASAKI W1 S/SA, KAWASAKI W400 (W1S), KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100
Fine Quaility and good finish
It has fine quaility and the shape is bit bigger than Inadome Blink but gives more classical mood on your motorcycle. Also competitive in the price wise than Inadome blinker. View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI W800, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400χ, KAWASAKI W650, KAWASAKI W400
The metarial is nice
The material and finishe are great and quite similter with Inadome blink signal. It has fine quality and would be a great alternative for your new blink View detail
It makes Parenthesis so much better!
The aforementioned review mentions interference, but in my case, I never had any such problems.
Top Bridgeetc. is removed. (In my case, I also needed to process KIJIMA's Blinker Bracket, but I am good at processing to begin with, so it was not difficult at all.) This may be a difficult task for DIY beginners.
I had originally thought that the headlight was a bit low on the z900rs, and I had recently installed a Handlebar Up Spacer, which I felt was not balanced properly and looked tacky, so I installed this and it made a drastic change.
The Handlebar Up Spacer is a very good match for the Parenthesis.
The MeterUp also improves visibility and I regret that I did not buy it sooner.
If it is difficult for you to process Gold by yourself, it would be better to ask a specialist to install it for you.
Would it be better if it were cheaper?
View detail
It can be used for ZEPHYR750.
The Long Type for ZEPHYR750 is discontinued, so the Super Long Type is available in a different size. to no avail, but I was able to use it without any problems, just a little longer.
Also, the lion part to be held by hand is smaller than that of the "Normal" model, so I felt that a longer lion part would be easier to use for opening the seat lock.
View detail
Always believable DOREMI
I always buy DOREMI products because I believe in technology.
Again, it was a Large hit, and I was more than satisfied with my expectations.
Replaced old Harness with new Harness and no electrical trouble.
It's been running fine so far.
View detail
Fits: KAWASAKI Z2 (750RS), KAWASAKI S1C, KAWASAKI S1B, KAWASAKI S1A, KAWASAKI KH500, KAWASAKI KH400, KAWASAKI KH250, KAWASAKI H2C, KAWASAKI H2B, KAWASAKI H1F, KAWASAKI H1E, KAWASAKI H1D, KAWASAKI S3, KAWASAKI S2A, KAWASAKI S3A, KAWASAKI W1SA, KAWASAKI W3, KAWASAKI Z1, KAWASAKI Z1000, KAWASAKI Z750
From z-type OEMBracket to DOREMI made Short
I changed from z1z2 OEMBRACKET to Short Bracket. z1z2 OEMBRACKET is good, but I changed to Short Bracket because I thought Short Bracket has better balance because I narrowed down the width of Handlebar.
There is nothing wrong with the installation with the combination of OEMBlinker and DOREMIBracket.
Once the wiring is pulled out of the OEMBracket, it may be difficult to pass the wiring through the small hole in the OEMBracket.
DOREMI's bracket has a large wiring hole for easy installation.
Plating quality is not bad and I think it is a good product because I think the price is reasonable.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI W800, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400χ, KAWASAKI W650, KAWASAKI W400
Used with W650
The Taper part is my favorite.
The plating is also firm. The mounting part is flat, but since it has a rubber to prevent it from turning, it does not seem to rotate after it is fixed.
Bolt lengths were modified for both front and rear for use on a W650.
The length can be selected from Short, Middle, and Long, and since they are sold individually, it is good that the length can be changed at the front and back. It is also helpful that the price is not particularly high compared to other companies' brackets.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS
DOREMI COLLECTION WideWatt Blinker relay
I used it on my z900rs. It works fine and is a must have when using the LED Blinker. View detail
DOREMI COLLECTION Z2TypeLED Blinker
I used the Short Type Bracket for the Front and the Long Type Bracket for the Rear. The brightness is perfect. The price is a little bit high, but I am satisfied with this quality. View detail
Fits: KAWASAKI Z1000 A1 / A2US specification, KAWASAKI Z1000 A1 / A2US specification
This is a replacement for the old Harness.
Used for kz1000LTD.
The color of the wiring is the same as the original, so it can be transplanted as it is.
There is no 6V MONKEY/GORILLA Main Harness for LTD, so this is a substitute.
View detail
Fits: KAWASAKI W1 S/SA, KAWASAKI W400 (W1S), KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100
The texture is good
The texture is good
I used it for Repair.
I am happy to order from one.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RSCafe, KAWASAKI Z900RS, KAWASAKI Z900RSCafe
Excellent relocation of arrows
Excellent quality solid and well painted turn signal relocation bracket! Simple assembly, fits with multiple license plate solutions ----------------------------- ----------------------------- Bracket reluctant arrows of excellent quality solid and well painted! Simple assembly, adapts with more carriers' solutions Powered by Google Translator View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100
Not Copy, not OEM.
The price was a little higher than the OEM Catalogue, and when I thought it might be OEM, I received the OEM Product number 23037-1278.
In other words, it is OEM itself. There is nothing special about it.
Well, there's no doubt about the quality, but it's kind of a subtle unconvincing feeling……
This ZEPHYR Type Blinker is shared with ESTRELLA, Eliminator, VULCAN400 and so on. (Although the shape of Case is a little different) It's convenient because you can use it as is.
View detail