Reviews
Fits: KAWASAKI KH250, KAWASAKI KH400, KAWASAKI KH250, KAWASAKI KH400
Side cover grommet
Side cover It fit beautifully. View detail
I am satisfied
Some of the mounting bolts were obviously too short, but the Motorcycle shop installed them for me, so I was able to get away with it. The footing and tank capacity is a little worse. View detail
Fits: KAWASAKI Z900RS, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI ZRX1200DAEG, KAWASAKI Z900RS, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI ZRX1200DAEG
Good fit and finish
Installed on my z900rs, it came black from the factory. Even though it needs painting, the colour and finish are good enough for track riding. View detail
Delivery takes longer, but the workmanship is excellent.
I waited a year, but I think the quality is good. 。 I'm glad I was able to buy it before the price went up. View detail
Z2 use
I was disappointed that the paint was finished with one spot of Garbage around the tank cap, which was Large. I could have returned it, but it would have taken a long time and I wouldn't have cared as long as the lid was closed. View detail
What every Z900rs needs
When I initially purchased the z900rs, I always thought the tail needed to be larger. This changes the look significantly. Just note that you will have to extend the taillight out or it will be hiding under the tail. Here are the stock tail mock up. View detail
Painting and Installing the Right SideSide cover
The paint is thin and scratches easily, and as another reviewer wrote about DOREMI's Right Side Side cover, the claws are too shallow to fit tightly at all, and the claw attachment part broke when I pushed to fit it tightly.
I've had no problems with the Tank, Tail cowl, or Left SideSide cover.
View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI Z1000R, KAWASAKI Z1000J
durability
It may be good to buy at the place where the Point reduction is the highest. View detail
High degree of difficulty in installation. Self-responsibility.
In the first place, I saw this used CB1100RExterior Set of DOREMI COLLECTION in person, and decided to return after 10 years.
I found a used RS car that met my requirements at the end of December 2020, so I ordered it; it arrived at the end of May 2021.
As expected, it was not easy to install. The accuracy of the parts is not good and there are some mistakes in the installation manual.
If you can't Rose the NORMAL exterior, ask the Shop to work on it.
After assembling the bike, we adjusted each part of the bike while test driving it, and repeated the process of rosing and assembling the bike many times.
However, when I think that the assembled car is in Garage, I forget the hard work until then.
I'm sure you won't be able to buy one soon, so if you're having trouble, please do so now.
I'm planning to post some blogs and videos about the process.
View detail
Stone Cowl!!
It looks like a Large, but it also increases the volume. I'm tempted to match it with the Under Cover, but I think I'll just enjoy it as it is for now. I think the paint job is not bad either ^_^.
It also feels easier to wind at high speeds.
View detail
DOREMIFX Exterior
They've arrived.
The Edge on the bottom part of the Tank was distorted by a few millimeters.
The packaging was perfect, so it's not the store's fault.
I think
Probably dropped once in the process of manufacturing and packing by DOREMI.
I think
The Spot welding process in the same section is also messy.
It is a pre-painted product, so we will fix it and then paint it.
Tail lamp
Wiring is also Bullet Terminal, not Coupler, so I have to replace this too.
You can't.
The quality is lower than I thought it would be.
View detail
I just wanted to ride the FX again...
Because my first car was Z400FX, I wanted to ride again. I made ZEPHYRχ to FXSpec. by the thing that there was no skill of the maintenance to maintain. If I close my eyes to the details, I am satisfied enough.
I dare say that Neck is a pity that the remaining quantity display of Gasoline meter does not huddrill.
View detail
z900rs
The cowl is magnificent and nice However, there is a subtle difference in the bracket on the right side when mounting, so be careful, and it is difficult to match the slope of the bracket. There is a disadvantage that the space on the light side is visible as the cowl is closed after installation. The overall completeness is very good View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Dissatisfied with durability
The same DOREMI Tail cowl that I had installed cracked at every mounting point under normal use, even though it never fell over, and I had to drill holes in it and fix it with Tie Wrap. That's why I bought another one.
This is a part that I had no choice but to buy, and I didn't buy it because I wanted to, so I would like to see improved durability or a less expensive setting.
View detail
Purchased to change the exterior of the ZEPHYR1100
This was the exterior I've wanted to put on since I purchased the vehicle.
I was very pleased with the packaging when I received the product.
It looks as cool as expected, and this time we ordered a painted Base to give it the ideal exterior.
Therefore, it is highly rated for ease of installation, quality and texture, and design.
View detail
Fits: KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr X
Not sure?
Order Quantity:Pair (for Left and Right) It was the subject picture, but the one I received was Right and Right. Please like the product as it is pictured. View detail
Perfect!
After buying the Doremi short chrome rear fender kit I had it powder coated black. I also bought and installed their KZ styled longer tail section. The quality of the items are absolutely first class, now my bike has the finished look I was wanting. View detail
It was a very good product
I saw DOREMIComplete and purchased this one The packaging is good and the shop is very good and prompt It was a good purchase View detail
There is a problem in removing the Fender Eliminator Kit
The degree of perfection is very good and the details are well done, but the Fender Eliminator Kit is a very good product The installation of the tail lamp was not good enough and Wiring of the tail lamp was not good enough for Instruction It's not like the Manual View detail
I'm satisfied
From Round Type to Square Type, the image of the entire motorcycle is changed to It's going to change drastically
If you're interested, I recommend it
By attaching this, you can use it for Emblem, Fender, Blinker, etc
There are some things you will want, so Cost will be quite a bit
View detail