Reviews
Fits: KAWASAKI Z2 (750RS), KAWASAKI W3/650RS, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z900 (KZ900), KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX
Perfect for USDMSpec.!
I bought this to give my Scooter a USDM look.
Parenthesis is better?
View detail
You should never buy that!
It's the same bracket as the Cafe, so if you put it on a non-Cafe model, it's too low and awkward, totally different from the Catalogue image!
The letters don't go in easily, or they are so loose that they seem to come off, or worse.
I want my Gold back. You should never buy it!
View detail
Fits: KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYRX
Kawasaki ForkEmblem
I installed it on my ELIMINATOR 250se.
Because I miss it when I remove Bikini cowl.
It is only cut out and fit like the plastic model, but there is a case that it is difficult to enter.
Mounting Hardware was not purchased.
Quantity mounting without much difficulty:Set complete!
I'm very happy with it.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 400, KAWASAKI Zephyr 400, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI Zephyr X, KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4)
Z900rs Fork Emblem
I am quite satisfied with this product after installation.
It has a classic look to it and is reasonably priced.
It will be a custom with high satisfaction.
I purchased it in chrome, and English characters must be inserted separately.
However, the disadvantage is that the fixing bracket is not included, so it is difficult to install.
And the English characters don't fit well
It takes a lot of force. ------------------------------------------------------------ -------- I am very satisfied with this product after installation.
It looks classic and it will be a custom with high satisfaction
for the price.
I bought it in chrome, and English letters have to be inserted separately.
But the disadvantage is that the fixing bracket is not included, so it is difficult to install.
And English characters are not well inserted
You have to put a lot of effort.
View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z1000 MkII
I'm hoping to prevent Gasoline seepage.
Tank cap of DOREMI's FXSpec.Tank cap tends to ooze Gasoline when it is put near Gasoline full Tan, so I bought it expecting this countermeasure product.
I haven't done any touring yet, but my motorcycle buddies have told me "No leaks. This is the case.
View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
Looks great.
In terms of texture, it is Plastic, and a little cheapness is seen, but I think that the appearance of such a thing is a Large thing, and it is
I'm very happy with it. The letters are fitted one by one, but they look more three-dimensional than those of different manufacturers, which is good. Easy to install and beginner
View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750, KAWASAKI Z2 (750RS), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI H2, KAWASAKI 500SS Mach III (H1), KAWASAKI Z900 (KZ900), KAWASAKI Z750, KAWASAKI Z2 (750RS), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI H2, KAWASAKI 500SS Mach III (H1)
As a Stopper for Side Stand
When I changed from the NORMAL 4-pipe exhaust system to a set of tubes, the stopper on the side stand was lost and when I removed the stand, the stand was hit by the frame. In that case, this Damper rubber is fastened to the frame with Tie Wrap and used as a stopper. View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI Z1000R, KAWASAKI Z1000J
durability
It may be good to buy at the place where the Point reduction is the highest. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS)
If you're not obsessed with it.
I replaced a rusty OEMOriginal.
OEMOriginal is kept in Large cut, and practical use is in Ripro.
It is just perfect for this kind of use.
View detail
Accessory Parts
I was worried that Horn was visible from the front, but it was solved. I was troubled a lot though I chose it costwise when I compared it with Mr. Archi. The reason for this is that when I look at the pictures of you wearing it, I feel like it's attached to the left side of the body & hellip;. My own is also slightly close to the left. If I feel like it, I'll reposition it with Small processing or buy a new one. I'm generally satisfied. View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
Ideal for Dress-up
I was looking for a Mimata Cover and decided on this product.
Easy to install and GOOD!
View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
The front is tightened.
It makes the front area look tighter and cooler. But if you look at it close, it looks cheap. View detail
whether it is there or not
It's been more than 2 years since I started riding the Z900RS
After all this time, I feel lonely around Front fork.
I put it on for a change.
Honestly, I don't care if it's there or not, but if it is, it's more or less there.
"KAWASAKI" The loneliness around Horn is marked by the letters
It feels like a reduction.
Installation is before mounting on the vehicle body. "KAWASAKI" and then take the BALI character of
It is necessary to fit into the plate, but it is easy to do.
It doesn't take much time.
In my case, there was some interference with the Horn when I installed it on the car body.
It was necessary to cut CoverBody with File, but it was not a problem.
GoldThe price is cheap compared to other companies' products of the same kind.
If you don't mind, I think I can recommend it.
View detail
High degree of difficulty in installation. Self-responsibility.
In the first place, I saw this used CB1100RExterior Set of DOREMI COLLECTION in person, and decided to return after 10 years.
I found a used RS car that met my requirements at the end of December 2020, so I ordered it; it arrived at the end of May 2021.
As expected, it was not easy to install. The accuracy of the parts is not good and there are some mistakes in the installation manual.
If you can't Rose the NORMAL exterior, ask the Shop to work on it.
After assembling the bike, we adjusted each part of the bike while test driving it, and repeated the process of rosing and assembling the bike many times.
However, when I think that the assembled car is in Garage, I forget the hard work until then.
I'm sure you won't be able to buy one soon, so if you're having trouble, please do so now.
I'm planning to post some blogs and videos about the process.
View detail
Fits: KAWASAKI Z900RSCafe, KAWASAKI Z900RSCafe
Worst item ever.
The parts were different from the Instruction Manual.
I threw it away because it was too much trouble to return.
View detail
Stone Cowl!!
It looks like a Large, but it also increases the volume. I'm tempted to match it with the Under Cover, but I think I'll just enjoy it as it is for now. I think the paint job is not bad either ^_^.
It also feels easier to wind at high speeds.
View detail
Fits: KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4)
ใช้แทนของเดิมได้เลย ขนาดพอดีกับของเดิม คุณภาพดี แพ็คสินค้าดี รอไม่นาน แนะนำ View detail
Fits: KAWASAKI 500SS Mach III (H1), KAWASAKI W1 S/SA, KAWASAKI 500SS Mach III (H1), KAWASAKI W1 S/SA, KAWASAKI 500SS Mach III (H1), KAWASAKI W1 S/SA
Doremi fuel cap.
This is a good looking fuel cap and fits well but the rubber seal swells up in contact with petrol and will have to be replaced. View detail
Fits: KAWASAKI Z900RSCafe, KAWASAKI Z900RSCafe
favorite
I was worried about whether an amateur could work on the thing that it was necessary to relocate the phone that was also in the manual, but I was able to work easily if I worked according to the manual.
After installation, I think the look from the Front is tighter and better looking.
If anyone is thinking of buying it, I think it will be a good accent and I will recommend?
View detail
DOREMIFX Exterior
They've arrived.
The Edge on the bottom part of the Tank was distorted by a few millimeters.
The packaging was perfect, so it's not the store's fault.
I think
Probably dropped once in the process of manufacturing and packing by DOREMI.
I think
The Spot welding process in the same section is also messy.
It is a pre-painted product, so we will fix it and then paint it.
Tail lamp
Wiring is also Bullet Terminal, not Coupler, so I have to replace this too.
You can't.
The quality is lower than I thought it would be.
View detail