Reviews
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
It sticks well without processing:??
Installation is very easy:??
Looks a lot better Parenthesis ??
Recommended for an introduction to Custom. It is cosmetically good. ??
View detail
The purpose is to dress-up
I do not intend to control the oil temperature, but to dress-up the oil. In that sense, I am satisfied with the product as shown in the Image. I have only driven about 200 km, but there are no oil leaks as described by others. By the way, the temperature display was about 90-100℃ in winter (I don't know if this is correct or not). View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS)
Horn switch dead…
I tried to get two of the OEM Product, but the internal parts were made differently (poorly) to begin with, and I gave up on them as soon as I opened them up. It seems to be a hit or miss situation. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Satisfied
When fitted, the atmosphere is completely changed.
If you are looking for luxury, this is an excellent choice.
View detail
I think it's good
I would like to know which is the best product for many of the same items. This item itself is not bad. safe View detail
Fits: KAWASAKI Z2 (750RS), KAWASAKI S1C, KAWASAKI S1B, KAWASAKI S1A, KAWASAKI KH500, KAWASAKI KH400, KAWASAKI KH250, KAWASAKI H2C, KAWASAKI H2B, KAWASAKI H1F, KAWASAKI H1E, KAWASAKI H1D, KAWASAKI S3, KAWASAKI S2A, KAWASAKI S3A, KAWASAKI W1SA, KAWASAKI W3, KAWASAKI Z1, KAWASAKI Z1000, KAWASAKI Z750
From z-type OEMBracket to DOREMI made Short
I changed from z1z2 OEMBRACKET to Short Bracket. z1z2 OEMBRACKET is good, but I changed to Short Bracket because I thought Short Bracket has better balance because I narrowed down the width of Handlebar.
There is nothing wrong with the installation with the combination of OEMBlinker and DOREMIBracket.
Once the wiring is pulled out of the OEMBracket, it may be difficult to pass the wiring through the small hole in the OEMBracket.
DOREMI's bracket has a large wiring hole for easy installation.
Plating quality is not bad and I think it is a good product because I think the price is reasonable.
View detail
Nice piece
Very nice Doremi quality piece perfectly suited for my anniversary Z900 RS. Assembly without problem, you just have to remember to order a new seal for the cover. -------------------------------------------------- -------- Very nice Doremi quality piece perfectly suited for my Z900 Rs Birthday. Mounting without problem, you just have to think about ordering a new seal for the lid. Powered by Google Translator View detail
I love this because it has a classic feel to it
I'm a Korean. I ride a Honda cb1100ex. A very good analog thermometer for use on bikes with air-cooled engines. The design is pretty and the function is faithful. You can check the temperature of the engine when warming up or taking a break in between. I recommend it. -------------------------------------------------- -------- I'm a Korean. It is riding Honda's CB1100EX. It is a very good analog thermometer for use in bikes with air-cooled engines. The design is also pretty and faithful to the function. When you preheat or take a break in the middle, you can check the temperature of the engine. I recommend it. Powered by Google Translator View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750FX, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750FX
Installed on TT-R125LWE.
Screw diameter is thinner than the resin type and the position can be adjusted finely.
I selected this product.
The bracket was also cut by hand from an aluminum plate and made one-off.
View detail
DOREMI COLLECTION Oil Temperature Meter
This is an IMPRESSION just installed due to the snowy weather.
Installation is quite easy.
I think there is a slight visual effect.
View detail
Looks good, just worried about being taken by bad guys
One of the must-have modifications, with a sense of retro and refinement.
The mirror above is rotatable.
It's just that if the parking environment is not ideal, it is too easy to be unscrewed... -------------------------------- -------------------------- One of the necessary changes, the sense of retro and exquisite coexistence. The mirror above can rotate. However, if the parking environment is not ideal, it is too easy to be spinned ... Powered by Google Translator
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI W800, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400χ, KAWASAKI W650, KAWASAKI W400
Used with W650
The Taper part is my favorite.
The plating is also firm. The mounting part is flat, but since it has a rubber to prevent it from turning, it does not seem to rotate after it is fixed.
Bolt lengths were modified for both front and rear for use on a W650.
The length can be selected from Short, Middle, and Long, and since they are sold individually, it is good that the length can be changed at the front and back. It is also helpful that the price is not particularly high compared to other companies' brackets.
View detail
Very well.
Nothing to say about the gauge sensor of the kawasaki 750 zephyr. Perfectly replaces the original gauge without any unpleasant surprises. -------------------------------------------------- -------- No complaints on the gauge sensor of the Kawasaki 750 Zephyr. Perfectly replaces the original gauge without any unpleasant surprises. Powered by Google Translator View detail
stunning.
A radical change for the look of the kawasaki 750 zephyr. A nice well finished product. Already primed and therefore ready to paint. -------------------------------------------------- -------- A radical change for the look of the Kawasaki 750 Zephyr. A beautiful well finished product. Already afterwards and therefore ready to paint. Powered by Google Translator View detail
Perfect
Quality product, perfectly identical to the original part. The minse in place in easy, the dimensions were respected. No nasty surprises. -------------------------------------------------- --------Quality product, performeal identical to the original room. The minimum in place in easy, the dimension were respected. No unpleasant surprises. Powered by Google Translator View detail
Very well.
Nothing to say about the fuel tap of the kawasaki 750 zephyr. Perfectly replaces the original gauge without any unpleasant surprises. -------------------------------------------------- -------- Nothing to complain about the gas tap of the Kawasaki 750 Zephyr. Perfectly replaces the original gauge without any unpleasant surprises. Powered by Google Translator View detail
Repeat
It is designed to hide Horn. Nothing to do with driving!
Looks. The promised Easy tease for now.
However, as is common with MotorcycleParts, it is expensive.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z750FX, KAWASAKI Z900 (KZ900)
Used for Z1
I'm not sure if the size is right.
It is a little Large.
View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400
Stem Cover (Stem Steel Emblem)
[How is it used? ZEPHYR750 (Z2Spec.) Mounting on
Was the one you received as per Image? Plating texture is high as per Image.
Was the installation difficult? My son's girlfriend was able to install it herself. (Presented as a delivery gift)
How was your experience with it? The old car looks better, and the hose around the front fork is hidden, so it's Refreshing!
[Included Parts:were they on? no problem
[Was there anything that disappointed you? No platchy feeling. (Material is Plastic) High quality
Opinions and requests to Manufacturer We would be very grateful if you could continue to supply us with good products for Motorcycle riders!
View detail
DOREMI COLLECTION z900rs ForkEmblem
Good value for money
I like that Horn can be hidden.
Cost is lower than that of pmc products.
View detail