Reviews
Fits: Others (AC-30-02)Cyclop Headlight, Others (AC-30-01)Diamond Head light
Not that I'm aware of, but..
When you buy a Chinese Headlight cowl (Offfor Vehicle), it comes with The rubber strap
I bought it as a replacement because it was falling apart It's been quite some time since I bought it
It doesn't become tattered like the Chinese one and can be used normally even in the present situation
View detail
No other SilencerProtector products are available, so I have to be patient
Designed by Hard and Co-Leverte in appearance; no RefreshingDesign The Material will not dissolve in the Exhaust System Stones can get stuck in the gap between the Exhaust System and Cover before they can be scratched Move it out of place Because of its high plasticity, it can be displaced and remains in its original position
Beware of the CHINA imitation shoddy products that are available on Amazon
View detail
Design is good
I chose this one from a number of disk guards because I like its mesh-like design It is
It's safe to say that you're protected up to Caliper
Because of this, the Caliper cannot be removed with the Guard still attached
You can use ZETA's Mount, but the Screw's diameter and the Guard's hole diameter are almost the same so
You will have to widen or screw in the hole a little
Well, I'm sure it will spread out after a few times of being attached and removed
I don't know at the moment, but it's not molded in one piece and the different colored parts are welded together
I'm a little worried that the blackened part of the mesh might come off as it deteriorates It is
This is a production end-of-production MODEL, so I think New Model is safer
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L
So-so
It was more Reasonable than ZETAFrame guard, and it was Colorful I chose this product
In a word, it's just Plastic
As it is plastic, the design is as shown in the image 。
The only thing that stops it is basically Tie Wrap? So it's easy to attach
Moreover, one of them is not allowed to wear Tie Wrap
It seems to be shared with other CRFs, so I don't think there's any way around it
After all, is the attention to detail like ZETA's somewhat lacking?
4,000 yen would be more appreciated
View detail
Good product
Very lightweight
Because the installation is universal, it seems to need some drilling on the Fender side
In my case, I made an inner fender, drilled holes in it and installed it
Blinker is also attached to Inner fender
View detail
It covers all the functions I want
I found it by seeking Locking Type lubricant Cap of IMS for Big Tank attached to CRF 250 L by way of example.
We do not have the opportunity to beat Motorcycle at once, so we do not know the leakage when we kill, but we are satisfied with the locking function.
Also in other reviews "Gasoline will spill over even if Cap is closed" Although I encountered only once, it seems that this was caused by refueling with the waves as much as the oil surface touched the valve at the bottom of Cap.
I have not relapsed since consciously to refuel at the Level which does not touch the valve.
I think that it is essential item for IMSBig tankUser.
View detail
I was attracted to Design and bought it - -
Personally Parenthesis the shape of Shield, I think that it is very good that various combinations can be made together with the color of the Guard part.
However, Guard's Aluminum crooked when it ran over several times with a feeling of liberty.
Also, the plaque of the Guard film is easy to gap and once it is displaced it is difficult to repair.
I think that it is good for town ride Dress-up, but I can not recommend it to those who do full-fledged off-road driving like running on Enduro race or rocky ground.
View detail
Cover Duct by thinking about winter season (Screw closure) Is included?
I bought it in anticipation of a tough winter in my hands. Knuckle guard will be purchased for the first time, but I do not know which Manufacturer is good, first I picked some candidates in my favorite form and decided on a good Arche Screw evaluation of Imp among them. This product, Cover that plugs Duct comes with this Cover installed (Screw stopped at 3 places) Then Knuckle guard area increases. ← If you can see the picture ,,, View detail
Although there is no problem in function ...
【What made you decide the purchase?】
I was able to lock the tank cap and purchased it because I could use it for IMS's Big tank.
【How was it actually used?】
CapLarge, the impression of the car changed by the Large rinse. Although it can be used functionally without problems, there are not many opportunities to use.
I think that it is a good part to prevent Prank.
[Is there anything I was disappointed about?]
It's too big
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none
【Have you compared items?】
There is none
View detail
I do not use it almost.
【What made you decide the purchase?】
Because I made Fuel Tank resin, I purchased it because I was uneasy because there was no Lock Function on the lid.
With key attached, I was able to fit IMS resin Tank was the deciding factor of the best purchase.
【How was it actually used?】
I could lock it tightly.
However, the cover is too large and the image of the vehicle changes.
[Is there anything I was disappointed about?]
It was a deca lid except for.
【Hope for Manufacturer - Please let me know if you have any improvement points]
For those who wish to have the function of locking, I think that Large is a funny good product.
【Have you compared items?】
There is none.
View detail
Fits: Others (AC-30-02)Cyclop Headlight, Others (AC-30-01)Diamond Head light
Because it is a consumable item ...
Clearly it is a consumable item.
And when you want it anywhere "out of stock" "Stock 1pc. Items that are difficult to obtain in plain "only".
Because it is Made of rubber "Shopping" To do it ... (Possibility of deterioration when necessary Large)
Inverted Front Fork is pretty much pulled and it gets worn, so it hurts soon ... Is not it what I wonder ...
Recently, Parts of this hand is inexpensive, poor Chinese Copy goods are overflowing and it is very grateful that you can handle it.
Strictly speaking, constantly Quantity : 1 Set worth (Four) With more inventory ...
View detail
When going to run to an off-road Course place besides a usual Touring, it is found useful although a spare Plug is brought. Although a Plug will be put into a tool box and will be carried if it puts into this Case, there is no fear of being crushed
When going to run to an off-road Course place besides a usual Touring, it is found useful although a spare Plug is brought.
Although a Plug will be put into a tool box and will be carried if it puts into this Case, there is no fear of being crushed by other tools, and it is dramatically convenient.
it can tear, while using several times, since the portion which has connected
however the lid, and the main part is cheap, and it meets -- it comes out and is somewhat uneasy.
View detail
Form is sharp and smart. Although the color was a White, the color a little appropriate for a light blue was regrettable.
Form is sharp and smart. Although the color was a White, the color a little appropriate for a light blue was regrettable. View detail
It was charmed by form and has attached to the MOTARD. Although the BALI etc. were in the fine place with overseas products, it is satisfied in general. attachment requires a drilling process according to a vehicle type.
It was charmed by form and has attached to the MOTARD.
Although the BALI etc. were in the fine place with
overseas products, it is satisfied in general.
attachment requires a drilling process according to a vehicle type.
View detail
At a thinner peak, a car body is this much high, and surely Gasa is touched in case of a broad Handle several times.In such a case, he is and sometimes thinks several times that it was good.I think that it is an ant as protective gear.As a point to worry,
At a thinner peak, a car body is this much high, and surely Gasa is touched in case of a broad Handle several times.In such a case, he is and sometimes thinks several times that it was good.I think that it is an ant as protective gear.As a point to worry, I think that the air resistance at the time of high speed operation, etc. will be what how. View detail
"Since I wanted to use the rear fender of DT125R (34X) as it is in my case, the product was cut and attached. A black portion is hard and processing was timetaking but I think there is enough reinforcement. Moreover, since even for a 125-cc small number,
"Since I wanted to use the rear fender of DT125R (34X) as it is in my case, the product was cut and attached. A black portion is hard and processing was timetaking but I think there is enough reinforcement. Moreover, since even for a 125-cc small number, there is no width which vacates a fitting hole, it is necessary to install in between the stay which attaches a number separately." View detail
It was bulky than expected. Structure is good although the reason made into the egg shape is not understood. I would like to carry a plug now from now on.
It was bulky than expected.
Structure is good although the reason made into the egg shape is not understood.
I would like to carry a plug now from now on.
View detail
It purchased in order to prevent breakage of the lever at the time of a fall. When a branch, grass, etc. hit during a run, since the effect as a hand guard is prevented very well, it is good, but since the raw material of a hand guard is soft, when it
It purchased in order to prevent breakage of the lever at the time of a fall.
When a branch, grass, etc. hit during a run, since the effect as a hand guard is prevented very well, it is good, but since the raw material of a hand guard is soft, when it falls, a hand guard is twisted and the lever has got damaged.
I think that it is a little difficult for expecting the same effect as a strong hand guard like ZETA since most is a product made of resin.
But I think that it is effective once since a lever has not broken.
The figure attached above all is cool.
This is the best Tokoro (smile).
View detail
Since the original manufacturer's product of the buell was too loud touch, the smallish guard here was purchased. O Since it is fixation only by the side of grip end, wearing is easy. O An effect appears at 80 K or more. O If it sees from widt
Since the original manufacturer's product of the buell was too loud touch, the smallish guard here was purchased.
O Since it is fixation only by the side of grip end, wearing is easy.
O An effect appears at 80 K or more.
O If it sees from width, a form is original and a parenthesis is good.
When it sees from before x, the design of a side is a translation which is tough touch and which puts color into the grip end side in the case of kana ?x wearing as which a compact may be sufficient to a slight degree, but this color will be put in, or it will become and a main part will come out outside.
Since the slim was a buell of the article for sale, the short bolt was purchased separately and it equipped with it without color.
View detail