Reviews
I love this helmet bag!
I love these helmet bags! I had 3 of them but then all our dirt bikes gear and accessories were stolen so I'm simply trying to replace what I already had.I recently bought a different bag and fount it really frustrating that my expensive helmet came with such a cheap bag. This bag fit my large helmet perfectly and has a soft inner lining and quality zipper. I would recommend this. View detail
Handy little bag
I love the double zipper. I mounted this on my dual sport, and wanted something I could lock up while out in public. Grated I use a small travel lock, but its enough to slow someone down.both son and I have one. Nice place for papers, a few tools, and a first aid kit and a small foldable saw! Mostly water proof, the area to put you papers isn’t water proof at all so you still should ziploc your papers, not a big deal though for me. Could be a bit bigger, but I ride with a hydration bag and it lightens that up. View detail
I like the sense of security!
Since my motorcycle is off-road, I can't compare the riding position with on-road. I don't mind riding with it on, but I think the Magic tape is a little weak. The price is reasonable, so I am glad I bought it.
It will reduce wind penetration from the neck area from now on.
View detail
Ideal for RALLY50
I think the waterproofness is perfect. The roll part must be rolled up after removing the hook on the SIDE to put in and out the contents, so it is not suitable for those who frequently put in and out the contents. The roll part is only fixed with Velcro on the line, so the fixing position is limited. The fit to the body is good and comfortable without swaying. View detail
Recommendation cannot be made for people who fall down a lot.
It was used for Enduro race.
Installation may be a little difficult due to the fact that it is a vehicle-specific product.
The texture of the appearance is good.
When I used it, I often tipped over and spun around in a GRU, which took me a lot of time to correct, and I was often passed by several people. The bar part is easily deformable, so it is easy to correct.
View detail
Burn & Handle Measures
[How is it used?
It is used for CRF250RX.
Exhaust systems are not limited to this car model, but they are parts that get quite hot.
In the event of a fall, the Exhaust System is designed to prevent the body from being hit by the Exhaust System when it is stuck in the body of the vehicle.
Also, CRF250RX of 2022 model has no handle-like part on the Right Side of the body, and the cause of the problem is Large and strange.
By installing this, we can have an Exhaust System so that we can cause the Motorcycle to fall to the Right without difficulty.
Was the one you received as per Image?
As shown in the Image.:I was worried that it might melt because it is rubber, but as expected of Exclusive Design, there is no problem at all.
Was the installation difficult?
It's easy:Tie WrapQuantity:Just wrap it around with 2pcs and stop.
How was your experience with it?
It is much easier to cause. What would I do without it? I feel like, "What would I do if I didn't have it?
[Included Parts:were they on?
It came with a body, a Tie Wrap to hold it in place, and an ACERBIS Sticker.
[Was there anything that disappointed you?
No, I don't!
View detail
Easy to use, no matter which Handlebar you install!
Now installed and in use on CRF125F.
Minimoto has many hand guards that cannot be installed due to severe space and bending caused by the short length of the handlebar.
We purchased this product because of its ingenious Bracket routing and angle, and because we were able to confirm that it could be installed on Minimoto.
Since there is no aluminum, etc. in the product, it is lightweight, as expected.
I really like that the Handling is not too heavy.
Although the Guard itself is not as strong as the Gold products, it can be installed in such a way that it does not fasten to Solidly but rotates moderately when impacted.
Therefore, even after several falls, the Brake/ClutchLever was able to protect it well without breaking.
The price is very good for a hand guard and I am very satisfied with the functionality. I would have given it 5 stars if the price was a little lower.
View detail
It will be active for smartphone navigation to forest roads and for Accessory Case.
Purchase driven by need for smartphone Navigation to forest roads.
I was worried that the Smartphone Holder attached to the handlebar would fall off, and I am not a fan of inexpensive for-motorcycle products, so I bought the ACERBIS one.
I thought ACERBIS had a nice design to put on Back or Rear to attach to Fender, but this product has a different design and seems a bit plain.
The tool box inside seemed a bit cheap, but I think it is very practical. I put tools and a 600ml plastic bottle in it, and it was full.
I guess tools and cigarettes are just fine.
View detail
CRF50F.
Installed on CRF50F Small School 3rd-6th Grade Spec.
The size is perfect, but the mount part is silver-colored resin, not aluminum.
However, considering the fact that these parts are designed for kids, I think resin is the right choice in terms of forearm entrapment accidents (bone fractures).
I could feel the kindness of ACERBIS towards KidsRider!
View detail
Now that we have a Number Plate
I use it on my WR250X
I switched from OEM to this one because I changed to Number Plate.
The front fender of the WR250X has a hole that attaches to the headlight cowl.
If you convert it to a Number Plate and remove the headlight cowl, the hole will be exposed.
As I value my looks, I could not allow that to happen, so I decided to replace it and chose this one.
This is a Universal Product and requires drilling. If you want to make a clean hole, drilling is recommended.
It is shorter than OEM and more MOTARD-like, but because it is shorter, water from the road surface will fly off when it rains.
You have to be prepared for conflicts between good looks and convenience, but it's cool, so I'm satisfied.
View detail
Fits: Others (AC-30-02)Cyclop Headlight, Others (AC-30-01)Diamond Head light
Quantity:1pc., Size is about φ40~.
I got this for Replacement for CyBlack Ops.
It's rubbery and thick like the Tire tube, and it seems to expand and contract in a certain way.
The inner diameter when naturally wrapped is about φ40, and it will be a bit of a pull to install on the Inverted Front Fork of the Off car.
On the other hand, the inner tube of the upright fork may be loose depending on the car model.
By the way, the price is for 1pc. (660 yen) 。Quantity:1 Set for 1 Vehicle is 2,640 yen……. You can buy a cheap headlight unit for the price of Gold that you can replace several times.
View detail
A little longer would be better.
[How is it used?
I installed it on my D Tracker 125.
I bought this to prevent my fingertips from getting cold.
Was the installation difficult?
The structure is simple, but it took some time to adjust the position of the brake/clutch holder to match.
How was your experience with it?
It looks really cool and I'm satisfied.
It was a good decision to choose the White color.
It also provides a reasonable amount of wind protection.
What I didn't like about it.
Since the Bracket of this product has to be installed between the Grip and the Clutch holder, the Clutch holder has to be off-set to the inside quite a bit.
So, the clutch lever is now harder to grip.
It would be best if the bracket could be mounted inside the brake/clutch holder, but then the guard would be offset to the inside of the bracket, so the wind would hit my hands and my small fingers would freeze.
View detail
Maybe better than the previous VisorType.
The VisorType I had on before may be good for rainy days, but I rode about 50km yesterday (Jan. 31) and this one may be more warm-proof due to its wrap-around shape. And although I don't want to fall, I feel more secure, and for someone like me who is not confident in riding, I think I may have a little more room for something. View detail
Looks good!
When I changed the fork oil, the OEM boots deteriorated and I couldn't get rid of the dirt, so I put them on.
If you can remove the front fork by yourself, you can easily attach it by tying it with Tie Wrap.
If the bindings are not tight enough, they will shift.
Even if mud gets on it, it can be removed with water, so it is easier to clean than the bellows Boots.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L
One point Fashion
I bought this because the paint on the Frame had faded on OffBoots.
It looks Up with a splash of color.
View detail
Chain Slider installed!
I removed the existing Chain Slider and installed the ACERBIS Red one, it was a little difficult to get the bolt through, but it went on without a hitch. I'm not sure how effective it is, but it looks cool! This is my second custom. This is my second Custom. View detail
Reduces hand numbness caused by vibration
I've been using it for two years.
I was suffering from numbness in my hands after long hours of driving.
I bought it after I saw that Rider of MOTO2 and MOTO3 is wearing it.
What I actually felt
The numbness in my hands is only slightly less.
The fabric is thinner than I expected, so if I take it off roughly, it might tear and I'll be careful.
assess
It's better to have it than nothing.
It has some heat retention properties.
Surprisingly sturdy since it hasn't been torn so far
If you make it a little thicker, it will reduce the vibration even more, but if you make it thicker, it might reduce the feeling of operation, so this thickness is OK.
This is why I gave it 4 stars.
View detail
Light and surprisingly strong.
Material:I had been using an aluminum close type hand guard, but I chose this one to take advantage of the lightness and flex of the handlebar. To be honest, I was a little worried about the strength, but so far it hasn't cracked in any falls. It has a certain degree of flexibility, and I feel that it dodges the impact of large impacts by turning itself. So, the Guard ability is not so high, and it is the Level which is not so different from the Open Type, but the difference from the Opening is that the Handlebar is not buried when you fall, and the Grip end is not hurt. View detail
I'm generally satisfied, but...
I bought this because I was in an accident in July and injured my knee.
My first impression when I saw it was that it was large and tough!
Well, I think it's good because it seems to protect you well.
The fit is good when the elastic band is tightened, but after a short walk or a long time on the bike, the elastic band loosens and starts to slip down. I think this is the biggest area for improvement.
Also, it's hard to get a good knee grip. I wear it on the outside of my pants, so the PivotBracket on the knee joint hit the Shroud (Tank Cover) and damaged it.
In order not to damage the Shroud (Tank Cover), I bought a non-slip pad at Home center and put it on. Please refer to the picture.
As a general comment, I think it is a well thought out product that is light, easy to move and has a sense of security.
View detail
Good product
I didn't want to make the Handlebar too heavy, so I chose this Type.
I decided to go with the closed type because the one that came with the car was not able to protect the lever in case of a fall.
I tried to install it, but the Handlebar has an 11mm inner diameter, and the supplied Bar End will not fit. (-_-;)
I had no choice but to find a 12mm diameter Bar End at Amazon and cut the inside of the Handlebar with a 12mm drill.
When I installed it, I dropped the tip of the XEF250 because the Lever on the Clutch Side is long and interferes with the inside of the Guard.
A little modification was required, but the product itself is sturdy and will protect Lever in the event of a fall.
Compared to the Gold genus Type, it is lighter and more solid, so I am satisfied with Large.
View detail