Reviews
BITTER BITTER Super motard front fender
I wanted to install a short fender, and after much deliberation with DAYTONA's MOTARDFender, I chose this one because of its design. The installation was done by drilling a hole with a drill after taking the position from the normal fender, since the seal to check the bolt position is included in the package. It was not difficult because I could get the exact position. Spacer was placed between the mounting Bolt and Body to make it slightly forward and lowered to create a combat Image. Other impressions say that the bounce in the rain is great, but this seems to be something we need to be patient with. View detail
As a light Fender
Purchased as a lightweight for Fender.
There is a different MODEL of the same ACERBIS, but this one separates the front and back Fenders.
I also bought it with the expectation that it would have a cooling effect since it can send VANVAN running air to the Radiator as it is, since it is shaped to have a hole in the middle when used only with the front Fender.
As a result, handling is lighter and we have no complaints about cooling.
In addition, since a back fender would have to be attached to the car if it is to be driven on dirt roads, please consider this as a proposal for use by Maine city drivers or those who can drive only on paved roads.
View detail
ACERBISFENDER
I was worried about the fitting with the light cowl on my XT250X, but it fits well.
The overall length is not much different from the OEM Product, so it has been extended backward, but there is no contact with the Frame.
View detail
To crf250l md47!
Purchased for MOTARD for crf250l!
The Instruction Manual was the English version, but if you measure the OEM holes, you can easily work with the Seal that serves as a marker for drilling holes!
The color is a little different but well, I am satisfied!
The back fender interfered a little with the body of the car, so I installed a 5mm washer!
View detail
Good linear design
Drilling is required for Universal Product.
A drilling Guide Template is included in the package and is specified for each car model.
Since the Template is a Seal, paste it into the Fender as it is. In this case, there is a form on the Fender side that tells you to paste it here, so follow it.
Then, drilling was done with Drill to complete the process.
I was worried that the holes might actually be gapped because it is an overseas manufacturer. So I traced the position of the holes on the Fender that came with the car and tried to match them to the Template, and found that they were almost the same, so I believe the Template that came with the car is large and strong enough for my model.
It is also lightweight, so it is supposed to make turning around much easier. However, when driving in the dirt or in the rain, it makes no sense at all, so we think it is safer to return to normal fender.
View detail
Now that we have a Number Plate
I use it on my WR250X
I switched from OEM to this one because I changed to Number Plate.
The front fender of the WR250X has a hole that attaches to the headlight cowl.
If you convert it to a Number Plate and remove the headlight cowl, the hole will be exposed.
As I value my looks, I could not allow that to happen, so I decided to replace it and chose this one.
This is a Universal Product and requires drilling. If you want to make a clean hole, drilling is recommended.
It is shorter than OEM and more MOTARD-like, but because it is shorter, water from the road surface will fly off when it rains.
You have to be prepared for conflicts between good looks and convenience, but it's cool, so I'm satisfied.
View detail
ACERBIS Super motard front fender
I think the product is solid and well made, but the moment I opened the bag, it was not as glossy as the other company's parts. It was the worst.
Can you return these things? LOL!
View detail
Easy to drill
Just a good Length seems to be less shaky.
Although attached to the XR 650 R, the position is easy to match with the attached paper, but when using OEM Color of 650 the OEM is thicker in the Plastic part of the mounting part, so in this Fender color length is left, so separately Washer If you do not put Spacer you will not be able to clean up like an OEM
View detail
It is necessary to drill - - - -
Shorter than OEM's long Fender, Image changed.
XR250 MOTARD had no description of hole size, but Honda car was the same drilling Pitch so it was okay to drill with that, but just to make sure I removed OEM's Fender and drilled with Drill after confirmation.
View detail
Easy Custom
I use it for DR - Z 400SM.
Electric Drill is required for drilling.
Mounting positioning is no problem at all. I think that you can purchase with confidence.
It seems that it affects driving though it is a feeling degree.
This time I tried to write a review unusually because the shipping speed of Webbuk and the free shipping service were large thanks to Large change.
Purchase Wye Big is definitely profitable.
View detail
MOTARDSpec. In!
NORMAL's Front fender was too long and I really did not like the feeling of MotocrossMotorcycle so I found this product as a result of various searches. After installing Seal for attachment attachment from the attachment, type (Us XR 650 R) You can install it if you drill a hole in the installation Pitch.
It was perfect if it matched only the color.
View detail
MOTARDSpec. The necessities of?
XR 650 R with MOTARDSpec. Although I made it, Normal fender was not able to receive anything so I was looking for various things, but I finally found it. Also attach the Seal for attaching holes to the Fender and the dimensions of the XR 650 R are written so open the hole as it is 10. I finished it with 5 mm Drill and attached it with Normal fender's Color attached.
Although the color is somewhat thin, Material : It's a Plastic item so it can not be helped.. Looks is very satisfying and satisfying.
View detail
Makeover
Because I wanted to make it look like Off-road, I removed this existing Fender and attached this Fender. Since holes were made to be able to know the position to be opened by Manufacturer, we opened 4 places and stopped with Size's matching Bolt. It took almost no trouble. I feel fresh by changing Image.
I wanted to make five stars, but because the color was a bit of White of Blue series, I was wondering whether the painting painted on Pure white with Spray of Pura Color before installing is one star Minus?
View detail
Front fender exchange
I also liked OEM's Front fender, but since I thought ACERBISSuper motard front fender was Cool, I exchanged it.
For installation, holes for mounting are not opened, so it is necessary to drill, but since Seal with dedicated grid is attached, positioning is easy and you can drill if there is only Drill. (I failed and opened two holes separately from the mounting holes. Once installed it will disappear. )
Although it is the installation to WR 250X, since it will create a gap with Headlight cowl only by replacing Fender, we moved Headlight cowl down and installed it.
I do not know in the image, but it looks really different from the OEM's White because it's completely different color..
It is unavoidable that the color is different because of the Universal Product, but I made the evaluation four stars.
View detail
cool
Drilling is necessary but it was easy to install thanks to the attached Seal. I also matched with Cowl of DT 230 LANZA and it became tightened looks.
It is still better if there are alternatives for other colors!
Fender which is similar to certain Oakon sells at 2000 yen or less and hesitated a little for the price, but it is very beautiful and it was a correct answer by buying the real thing.
View detail
There is a feeling of strangeness in old vehicles
I tried to replace KDX 220 to refresh its tight exterior.
Although hole punching is necessary for installation, since Material is Material, it will be free with a victory.
Also, as I understood, since it is a split type, installation is slightly troublesome.
However - - - ,
Although it looks very good with Single Item,
I do not like the linear Forme much when it matches to the vehicle,
Compatibility with KDX is not very good above anything.
Kawasaki green and Fender color - The shape is
I did not match anything and I eventually removed it.
I think whether to make a match without incompatibility if the current vehicle,
Currently, other cars are unnecessary for replacement so I'd like to let you sleep for the moment.
I think that we can recommend to current BlackBase vehicles.
View detail
To D - TRACKER 's Imechen
It is an exchange from Dender X's Fender.
2pcs. It takes a little time to install in the configuration.
A sticker for drilling came and I was able to determine the location of the kitchen hole.
It does not seem easy to crack easily with firm making.
I like Sharp's design, but it is regrettable that I can choose only the color Black.
View detail
Form is sharp and smart. Although the color was a White, the color a little appropriate for a light blue was regrettable.
Form is sharp and smart. Although the color was a White, the color a little appropriate for a light blue was regrettable. View detail
Since the position of a hole changes with vehicle types the Design in which structure is solid is [ vehicle types ] also a Cool. [ which must attach by itself according to a Motorcycle, and must make the hole of business although I attached to CR
Since the position of a hole changes with
vehicle types the Design in which structure is solid is [ vehicle types ] also a Cool. [ which must attach by itself according to a Motorcycle, and must make the hole of business although I attached to CRM ] [
]
If this to which the
Seal containing a grid is attached is stuck, most vehicle types so that the position in which the
hole is made may be known.
it changes --
--
in which I made the hole by the Cordless drill by gauging --
which any problem does not have and was able to be attached finely -- since it is very pleasing, it has by two different colors.
The red Fender of the
photograph is raised 5 cm, is attached, and there is.
Affinity with a Front number is also one article of the
Recommendation in an Exactly.
View detail
It was charmed by form and has attached to the MOTARD. Although the BALI etc. were in the fine place with overseas products, it is satisfied in general. attachment requires a drilling process according to a vehicle type.
It was charmed by form and has attached to the MOTARD.
Although the BALI etc. were in the fine place with
overseas products, it is satisfied in general.
attachment requires a drilling process according to a vehicle type.
View detail