Reviews
Boots Friction Prevention
I am very satisfied with the design and the ease of installation. View detail
Frame protection and improved gripping
Off-road motorcycles tend to peel off the paint on the frame when riding in Boots, because the frame is inevitably caught between the legs when standing.
From the viewpoint of preventing paint from peeling off and rusting, it is recommended to install frame guards.
Installation is easy because it is only fastened with a washer (sturdy rubber), but side covers and sprocket covers cannot be installed properly unless they are removed, even if it is a pain in the ass. It is a bit of a hassle, but it would be better to remove the Cover before installation.
View detail
Simple but good performance
It looks good, but the grip is good, so there is no burden when standing due to the grip of the boots and chassis. Installation is very simple and I think it's good because it prevents scratches.About quality and texture View detail
When the Center Stand is installed, a little effort is required.
The Instruction Manual indicates that the cover under the tank must be removed for installation, but it can be installed without removing the cover.
On the Left Side, the lower claw is first fitted and then fastened with two bands (Large and Small).
The Left bottom of the Right Side Cover interferes with the Center Stand, so it must be trimmed, including the claws.
I think you should cut at the base of Radio pliers and Cutter to Beauty!
Then fasten with Largex2 Band
Bundling Electrical Cord Covers Next Needle Gold Makes Banding Easier
View detail
When the Center Stand is installed, a little effort is required.
The Instruction Manual indicates that the cover under the tank must be removed for installation, but it can be installed without removing the cover.
On the Left Side, the lower claw is first fitted and then fastened with two bands (Large and Small).
The Left bottom of the Right Side Cover interferes with the Center Stand, so it must be trimmed, including the claws.
I think you should cut at the base of Radio pliers and Cutter to Beauty!
Then fasten with Largex2 Band
Bundling Electrical Cord Covers Next Needle Gold Makes Banding Easier
View detail
good-looking
It sticks tight like OEM. The ankle grips are good and easy to stand on. The ORing for the fixation may break someday, but it can be fastened with a bundle of wires, and the mechanics at the motorcycle shop liked it. View detail
Wow that's cool
[How is it used?
Dress-up
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Safe in the event of a fall
[Included Parts:were they on?
(after the -te form of a verb) not ..
[Was there anything that disappointed you?
(after the -te form of a verb) not ..
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FE501, HUSQVARNA FE350S, HUSQVARNA FE450S, HUSQVARNA FX350, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE150I, HUSQVARNA TE250I, HUSQVARNA TE300I, HUSQVARNA TX300I, GASGAS EC250, GASGAS EC250F, GASGAS EC300
Frame guard installed TE??FE
The standard Achal ScrewFrame guard.
Cover range is wider than OEM.
Blue type Frame guard on the TE of Blue type Frame,
Black type Frame guard is attached to Black type Frame FE.
Remember to remove the OEMParts collar and use it.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L
For Smooth Shift change
There is a hole on the left side of the frame for attaching the swingarm, and the work boots would often get caught on the convex part of the hole, causing shifting errors (this may not be a problem depending on the finish of the outer side of the boots). (This may not be a problem depending on the finish of the outer side of the boots.)
I happened to see it installed on a vehicle of the same model that I saw, so I ordered it and installed it.
Hexagonal Wrench was used for part of the installation, but most of the installation was completed by tightening Tie Wrap and cutting the excess part with Nipper.
After the test ride, I confirmed that the ankle grips are easier to do and the snagging of the Boots has been eliminated.
However, when removing the Swingarm for servicing, it must be removed because it is in the way, and a new Tie Wrap is needed in that case.
I don't know how durable it is, but it makes it easier to ride and I appreciate the product.
View detail
Frame scratch prevention
I bought this to prevent the Frame from being damaged by Boots.Color to match the Frame Collar:The base color is Gray, and the Grip is Black with a non-slip material fitted, so there is no discomfort when wearing it.
Installation is easy and the Right Side (Brake Side) The "Others" method uses only one NORMAL screw, while the "Others" method uses an O-ring that is turned on the reverse side of the frame and hooked onto the Protector's mounting hook.
I think it would be best to warm it up with a Dryer or similar to match the curvature of the Frame.
Grip by Boots felt easier, and it was also good to prevent damage to the Frame.
Mud and water can get between the Frame and Protector, so it looks like it should be removed and cleaned periodically.
View detail
Fits: HONDA CRF 450R, HONDA CRF 450RX, HONDA CRF 300RX, HONDA CRF 250RX, HONDA CRF 250R
Grip feeling Up!
[How is it used?
Used on CRF250RX '22 model. frame protector is a frame protector that only reduces scratches and damage to the chassis, but this ACERBIS frame protector has a rubber-like outer surface that improves the grip between the boots and the frame protector. It is an excellent product that also improves the grip between the boots and the frame.
Was the one you received as per Image?
The color is better than I had imagined and looks great.
Was the installation difficult?
The instruction manual, while a bit confusing, is included in the package, so I had no trouble at all.
Resin parts are inserted into the hollowed-out cylindrical part of the body and fixed with Screws. Bind it to the frame with the attached rubber. Is this what you want? But it is very accurate and firm, so it is totally sturdy and large.
How was your experience with it?
The Grip feel is totally different.
The ankles of my boots did not fit the frame properly due to the thickening of the knee side after wearing the knee brace, and I was feeling uncomfortable. With this brace, the fit of the ankle portion has been greatly improved, making it much easier to control!
I should have put it on from the beginning,,,!
Of course it serves its purpose of Guarding the Frame well!
[Included Parts:were they on?
Rubber and Screw for mounting, plastic parts for fixing Screw holder, and ACERBIS Sticker.
[Was there anything that disappointed you?
No, I'm not! I'm so happy!
View detail
Fits: YAMAHA WR 125 2T, YAMAHA WR 250 2T, YAMAHA YZ250, YAMAHA YZ125
Both Boots and Frame can be protected.
When I was riding my YZ125, the Frame and Boots rubbed against each other.
I bought it to keep both Boots and Frame down as they are both coming down.
The frames have not decreased in size, and the boots do not seem to hurt as much because the plastic is softer around the boot.
However, the Frame protector was clearly more sharpened after just one ride.
I thought it needed to be replaced regularly.
I did not feel any particular discomfort in the Knee gripetc. when I rode.
View detail
Fits: BETA RR 2T 250 RC, BETA RR 2T 300 RC, BETA RR 4T 350, BETA RR 4T 390, BETA RR 4T 400, BETA RR 4T 430, BETA RR 4T 450, BETA RR 4T 480, BETA RR 4T 498
Very comfortable to use!
I replaced it because it was worn out a lot with the new Boots.
I made a new one with the same one this time because it has a footpeg Grip feel and is friendly to Boots.
View detail
Fits: HONDA CRF450RX, HONDA CRF450R, HONDA CRF250RX, HONDA CRF300RX, HONDA CRF250R
ACERBIS X-GRIP FRAME PROTECTOR Honda CRF 2021
Excellent product.Great quality. It has a Perfect fit and super easy to install.Instructions are clear and should take no more than 10 minutes. View detail
Fits: HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L
Easy installation
Installation was inexpensive and the price was good.
Also, the Design was good.
View detail
worth it
Not expensive, worth it.They last a long time. Never had any issues with them coming off or getting hung up on anything. Easy to fit. Protect nicely. Nice colors. I recommend it. One thing to note ;they get grippier as they wear.only problem though is you go through zip ties when you are cleaning your bike since dirt will get behind them. Will buy again when the time comes. View detail
It is easy to install.
The Brake Side can be easily attached by hand, but I think it is easier to hang the fixture on the Hook if the Shift Side is hooked onto a Clip or something like a needle gold and pulled. View detail
Nice and easy installation
It's easy to install, looks great, works, and works! View detail
The design and functionality are perfect!
The paint on the frame around the ankle area was peeling off due to friction from the boots, so I put it back on and it not only improved the design but also the gripping feeling around the ankle. View detail
Effective, but Large to put on and take off.
[How is it used?
I have seen several photos of Boots rubbing and peeling off the Frame paint, so I installed this as a countermeasure.
Was the installation difficult?
The O-ring? that comes with the frame is used to secure it to the frame, but I had a hard time because the gap to pass it through is very narrow.
How was your experience with it?
I feel that Frame is well protected.
However, dirt and water accumulate between the Frame and Protector, so it needs to be removed and washed periodically, but it is Large strange to attach and remove….
View detail