Reviews
Weight reduction around handlebar
I have always enjoyed forest road touring with gasgas EC250 as a hobby.
It is an application that sometimes runs a little HARD.
Until now, I have been using ZETA's Guard with Aluminum in it,
The Handlebar end of the Motorcycle, the furthest end of the Motorcycle, is extremely heavy, and with the worsening of the Handleling,
I was struggling with the weight of the Motorcycle when I knocked it down.
Also, the fat bar's bend also became a snap, and for a long time we were troubled with the selection of a hand guard.
To be honest, this hand guard works. However, it can be easily fixed by hand, so I am not particularly dissatisfied with it.
Since it is not made of aluminum, it is very lightweight. The lever protection is also very good, and so far it has protected me well.
Total performance is very good. It seems to be my ideal Hand guard.
I would like to test how far it will endure while actually using it, since it is plastic in nature.
By the way, although it is Plastic, it is surprisingly sturdy.
View detail
Match the color.
Product Name
ACERBIS ACERBIS TRI FIT Hand Guard TRYFit
Item Number
AC-16508RD
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
15 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I was looking for a red hand guard and chose this one because it was highly rated.
Was the one you received as per Image?
It was just like the Image. Cool looking
Was the installation difficult?
It is not difficult because all you have to do is fasten the screws.
How was your experience with it?
I am very satisfied with the product and would recommend it to anyone who is looking for a hand guard.
[Included Parts:were they on?
There were Instruction Manuals for handling Seal, etc.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
protection against cold
Inner Weight inside Handlebar Pipe must be removed.
The Handlebar on my vehicle is welded with a Weight of Plug.
I purchased a Handlebar separately since it is non-disassembled.
Tightened up with M8 Socket Bolt included in the structural
The structure is fixed in place, but it must be torqued considerably.
It is not locked, so be careful of head slugs.
I have covered with HondaOEM Handlebar Upper Holder Cap.
View detail
Lightweight and easy to install
Material:I managed to put it on because it is plastic, so it bends a little. I have a kx112 that was converted to a public road, so the handlebar area was a bit large and strange because there was no space for switches and such. View detail
usually
It can be used normally, but it is better to retighten it regularly. Especially this type is a pain to remove because it remains inside if it is loosened too much. I wanted to buy the type that has a bolt inside and expands the circumference, but I had no choice because I couldn't find it. View detail
I don't know
I think it is normal in terms of feel. The texture is also normal. I wanted a stronger bite, but I couldn't find one.
Installation is also very easy. Anyone can easily install it.
View detail
Recommendation cannot be made for people who fall down a lot.
It was used for Enduro race.
Installation may be a little difficult due to the fact that it is a vehicle-specific product.
The texture of the appearance is good.
When I used it, I often tipped over and spun around in a GRU, which took me a lot of time to correct, and I was often passed by several people. The bar part is easily deformable, so it is easy to correct.
View detail
Easy to use, no matter which Handlebar you install!
Now installed and in use on CRF125F.
Minimoto has many hand guards that cannot be installed due to severe space and bending caused by the short length of the handlebar.
We purchased this product because of its ingenious Bracket routing and angle, and because we were able to confirm that it could be installed on Minimoto.
Since there is no aluminum, etc. in the product, it is lightweight, as expected.
I really like that the Handling is not too heavy.
Although the Guard itself is not as strong as the Gold products, it can be installed in such a way that it does not fasten to Solidly but rotates moderately when impacted.
Therefore, even after several falls, the Brake/ClutchLever was able to protect it well without breaking.
The price is very good for a hand guard and I am very satisfied with the functionality. I would have given it 5 stars if the price was a little lower.
View detail
CRF50F.
Installed on CRF50F Small School 3rd-6th Grade Spec.
The size is perfect, but the mount part is silver-colored resin, not aluminum.
However, considering the fact that these parts are designed for kids, I think resin is the right choice in terms of forearm entrapment accidents (bone fractures).
I could feel the kindness of ACERBIS towards KidsRider!
View detail
A little longer would be better.
[How is it used?
I installed it on my D Tracker 125.
I bought this to prevent my fingertips from getting cold.
Was the installation difficult?
The structure is simple, but it took some time to adjust the position of the brake/clutch holder to match.
How was your experience with it?
It looks really cool and I'm satisfied.
It was a good decision to choose the White color.
It also provides a reasonable amount of wind protection.
What I didn't like about it.
Since the Bracket of this product has to be installed between the Grip and the Clutch holder, the Clutch holder has to be off-set to the inside quite a bit.
So, the clutch lever is now harder to grip.
It would be best if the bracket could be mounted inside the brake/clutch holder, but then the guard would be offset to the inside of the bracket, so the wind would hit my hands and my small fingers would freeze.
View detail
Maybe better than the previous VisorType.
The VisorType I had on before may be good for rainy days, but I rode about 50km yesterday (Jan. 31) and this one may be more warm-proof due to its wrap-around shape. And although I don't want to fall, I feel more secure, and for someone like me who is not confident in riding, I think I may have a little more room for something. View detail
Light and surprisingly strong.
Material:I had been using an aluminum close type hand guard, but I chose this one to take advantage of the lightness and flex of the handlebar. To be honest, I was a little worried about the strength, but so far it hasn't cracked in any falls. It has a certain degree of flexibility, and I feel that it dodges the impact of large impacts by turning itself. So, the Guard ability is not so high, and it is the Level which is not so different from the Open Type, but the difference from the Opening is that the Handlebar is not buried when you fall, and the Grip end is not hurt. View detail
Good product
I didn't want to make the Handlebar too heavy, so I chose this Type.
I decided to go with the closed type because the one that came with the car was not able to protect the lever in case of a fall.
I tried to install it, but the Handlebar has an 11mm inner diameter, and the supplied Bar End will not fit. (-_-;)
I had no choice but to find a 12mm diameter Bar End at Amazon and cut the inside of the Handlebar with a 12mm drill.
When I installed it, I dropped the tip of the XEF250 because the Lever on the Clutch Side is long and interferes with the inside of the Guard.
A little modification was required, but the product itself is sturdy and will protect Lever in the event of a fall.
Compared to the Gold genus Type, it is lighter and more solid, so I am satisfied with Large.
View detail
Anyway, it's light.
In combination with this Hand guard and ARCLever.
It's running.
The strong Hand guard is able to make a small contact with a standing tree, etc.
The Handlebar will be taken and
It has a certain weight, and the Handling becomes sluggish.
Because I don't like it.
Plus Tik's elasticity is quite high.
Even if you fall down hard, there will be no damage to the Large.
Recommended
View detail
It's sturdily made, which helps.
I used it because my friend who rides Africa Twin was using it.
With the weight of the CRF250L, a normal Hand guard will turn in almost one shot.
I replaced it almost once a year. So far, I've fallen over a few times.
It's not deformed. It seems to be long-lasting and helpful.
View detail
Dress-up parts to get you in the mood!
I added the Bar pad which is a standard part for Off-road motorcycle.
I chose ACERBIS because many people wear Renthal.
It's always in view, which makes me feel so much better!
View detail
CloseType but light
Full closeType, but Material:I bought it because it was rumored to be a plastic and light hand guard.
Hand guard. I like Open Type. "Closed type. I think it's just a personal preference that I like the I like the closed type.
I love it. Rather than that, because it is still inferior to it and often falls down or hits the tree, it is not very good, but Risk is Large size in Open Type.
When we ask the people who are not good at closed type Hand guard for the reason, the following is always on the top of the list It's too heavy. There is a
The frame of the closed type hand guard is made of tough material such as aluminum, which has a high defense capability. So it is much heavier than the open type, and the handling is also heavy. And it is hard to fix the frame if it is bent.
However, the frame part of this product is resin. Moreover, it doesn't break so far even if I use it because I often fall over and hit the tree. I feel that the shock is absorbed because it is resin.
This is the closed type I've been waiting for, as I love the closed type! This is a product called.
It looks like we'll be using it for years to come!
View detail
Spoiler installation + position adjustment
As the temperature in the morning came down, I tried running Spoiler which I was putting forward but I feel the wind at the back of my hand and my fingertip so close the Slit in the lower half with a Cutting sheet and put 2 Body attached Screw holes I tried to make it inside and below.
Hand guard body will be upwards shape.
In this way it seems that the wind that hit is much less.
Just like Handlebar Cover, since the wind is supposed to hit, I think that it is important to look very much.
View detail
Easy to install and Cost ♪
I chose Open Type as 70% of appearance and 30% of wind blowing purpose.
I think that there is no strength when falling.
Instructions were not attached, only a picture to Package, but the structure was simple, so I could install it for beginners.
I tried on the condition without Spoiler and tried it without Gloves.
Sometimes it is installed at a lower level, the fingertips holding the Handlebar are no longer hit by the wind, but the wind hits the back of the hand.
I will give it a try if I add Spoiler when it becomes colder a little more.
View detail
Very Parenthesis is nice..
I felt the first thing when this item arrived It was surprisingly Large.
I thought about actually installing it myself, but since the parts used for fixing the end were not in the same state, I gave up and asked the shop.
I actually installed it and confirmed Clearance, but the Guard part did not interfere with Screen
Satisfied, the vibration of the Grip part which was at the time of high speed running also disappeared and the numbness of the hand was gone, so it became quite comfortable.
Honestly, I can not recommend it for beginners.
You can recommend it for those who seek out.
View detail