Reviews
good
looking good but its for light use not for hard rally use as its just plastic guard . will definately buy one with metal frame next time View detail
Hand guard installed
I installed it on the front and rear pad of my HUSQVARNATE250, which I always use for fun rides on forest road touring and EnduroCourse.
I had been using ZETA aluminum frames, but when I removed the hand guard, my handling became very light, and I felt that making the outermost part of the motorcycle heavier would significantly reduce mobility. I decided to switch to ACERBIS without frames, even though the protection was less.
I like it because it is lightweight without a frame, and it protects my hands and lever without compromising handling. The only drawback is that it shifts easily, but I am willing to put up with that because the light weight is more important to me.
View detail
Excellent bite
This is for ACERBISClosedGuard.
Quantity by price:I think it is 1 Set for 1 Vehicle.
The structure allows for smooth installation without the Bolt spinning like other Adapters. (Not available in other Manufacturers) is caught and this ease of installation is created.
Of course, it can be installed on ACERBIS compatible products, but it is difficult to use it on other companies' products because the mounting hole of the Adapter needs to be enlarged to a long hole.
View detail
It attached to Zep750 as a measure against protection against the cold. Since my motorcycle was already exchanged for a general-purpose handle, it was able to be attached by attached metal fittings. I think that the conformity check of the diamete
It attached to Zep750 as a measure against protection against the cold.
Since my motorcycle was already exchanged for a general-purpose handle, it was able to be attached by attached metal fittings.
I think that the conformity check of the diameter of a screw is required in the case of the pure handle which carries out the screw stop of the bar end.
Or and a portion is whether to exchange for the general-purpose handle of a cave.
Incidentally the diameter of an attachment bolt of an end part is Mxx.
Since I thought that there were also many directions which conformity (interference) worries, the photograph from a top was carried.
Although the brake side was exchanged for the radial master of Nissin and the clutch side was exchanged for the wire type hachis of AKOSATTO, it was able to attach satisfactorily especially.
Moreover, there is also no interference with a cowl (AR breaker).
Since it cannot say that it is completely calm about the protection-against-the-cold (protection against wind) effect since the area covered as appearance is small, but a hit of a wind can soften, it becomes comfort (comfortable) fairly.
although operative verification of a severe winter term has room for improvement -- the combined use with a winter glove -- the rudder of a fingertip -- seeing -- it is hoped that it may be eased.
Supposing it mentions negative implications, even if finishing (texture) of what has a strong configuration takes the average and the charge of ideas into consideration, it will just be going to be seemed that this price setting is high by it.
The rest is that handle width spreads.
Cautions are required in contacting neither other vehicles nor an obstruction.
if there is merely this frame part -- a commercial size -- I think that it also becomes a base when attaching a knuckle visor [ for the first time in ].
Many things were taken into consideration and the hit was made evaluation of three stars.
If it inquires towards a winter season, how is it?
View detail
I used it at WR.
I used to use this product in the days when I only went on light forest roads.
Since it is made of resin, protection performance in the event of a fall is not expected.
It was only as effective as its name, Bush Guard, but nothing can change the lightness of this product.
When I had a big fall, my Right Side was turned Up and it became awkward, so it was no longer useful.
View detail
I was attracted to Design and bought it - -
Personally Parenthesis the shape of Shield, I think that it is very good that various combinations can be made together with the color of the Guard part.
However, Guard's Aluminum crooked when it ran over several times with a feeling of liberty.
Also, the plaque of the Guard film is easy to gap and once it is displaced it is difficult to repair.
I think that it is good for town ride Dress-up, but I can not recommend it to those who do full-fledged off-road driving like running on Enduro race or rocky ground.
View detail
Cover Duct by thinking about winter season (Screw closure) Is included?
I bought it in anticipation of a tough winter in my hands. Knuckle guard will be purchased for the first time, but I do not know which Manufacturer is good, first I picked some candidates in my favorite form and decided on a good Arche Screw evaluation of Imp among them. This product, Cover that plugs Duct comes with this Cover installed (Screw stopped at 3 places) Then Knuckle guard area increases. ← If you can see the picture ,,, View detail
At a thinner peak, a car body is this much high, and surely Gasa is touched in case of a broad Handle several times.In such a case, he is and sometimes thinks several times that it was good.I think that it is an ant as protective gear.As a point to worry,
At a thinner peak, a car body is this much high, and surely Gasa is touched in case of a broad Handle several times.In such a case, he is and sometimes thinks several times that it was good.I think that it is an ant as protective gear.As a point to worry, I think that the air resistance at the time of high speed operation, etc. will be what how. View detail
It purchased in order to prevent breakage of the lever at the time of a fall. When a branch, grass, etc. hit during a run, since the effect as a hand guard is prevented very well, it is good, but since the raw material of a hand guard is soft, when it
It purchased in order to prevent breakage of the lever at the time of a fall.
When a branch, grass, etc. hit during a run, since the effect as a hand guard is prevented very well, it is good, but since the raw material of a hand guard is soft, when it falls, a hand guard is twisted and the lever has got damaged.
I think that it is a little difficult for expecting the same effect as a strong hand guard like ZETA since most is a product made of resin.
But I think that it is effective once since a lever has not broken.
The figure attached above all is cool.
This is the best Tokoro (smile).
View detail
Since the original manufacturer's product of the buell was too loud touch, the smallish guard here was purchased. O Since it is fixation only by the side of grip end, wearing is easy. O An effect appears at 80 K or more. O If it sees from widt
Since the original manufacturer's product of the buell was too loud touch, the smallish guard here was purchased.
O Since it is fixation only by the side of grip end, wearing is easy.
O An effect appears at 80 K or more.
O If it sees from width, a form is original and a parenthesis is good.
When it sees from before x, the design of a side is a translation which is tough touch and which puts color into the grip end side in the case of kana ?x wearing as which a compact may be sufficient to a slight degree, but this color will be put in, or it will become and a main part will come out outside.
Since the slim was a buell of the article for sale, the short bolt was purchased separately and it equipped with it without color.
View detail