Reviews
no problem
There were no problems, and the product could be used normally. View detail
Necessities when changing Oil
This is the first time I have used this product, and it is a convenient product that fits tightly into the mouth of Honda's UltraG1 and can be disposed of as is.
However, if the engine is a Vertical TypeEngine and refueling is done from above, the nozzle part is a little short, and there were times when the oil would spill unless the kick pedal was removed on my vehicle.
I would be more than happy to have a longer Nozzle as a separate Spec.
View detail
Cheap Oil nozzle
If oil is poured directly into a motorcycle, there is a risk of spilling it, so it is safe to add a nozzle.
I bought this product because it was recommended to me. There is nothing special about it, but I think it is a product that can be recommended to everyone because it is inexpensive and has no problems in use.
View detail
Required for Oil replacement!
[How is it used?
I use this when I change the oil in my Scooter! I had to cut a dry plastic bottle to pour the oil, but it was a hassle, so I bought this product. I am glad that it became easy.
How was your experience with it?
Of course it is easy to use. It is a common Nozzle? I would appreciate it if you could put it with the Oil when you buy it. It gets sticky after one use, so I think if you wash it thoroughly and store it, you can use it again.
How did it compare to other products?
I felt there was not that much difference. I think they are the same.
Might as well buy them together when you exchange Oil!
[Points to note]
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Easy to use
It was very easy to use. I just don't know if I'll be able to store it. View detail
Unexpectedly easy to lose
[How is it used?
When I buy Oil, I find myself buying it together.
It can be used many times, but after using it once, I am very prone to losing it.
Made in foreign countries (A little expensive) Plastic containers that are a bit nifty have nozzles at the mouth, but many Japanese tin plate cans, such as OEMOil, do not. You will need such a nozzle.
How was your experience with it?
Basically, it can be used for 1L tin plate cans, whether Honda, SEA BASS, or Yamalube, since the tin plate can itself is almost the same.
If the oil inlet protrudes from the outside, this is sufficient, but if the oil inlet is located a little further back, such as on a scooter, or if the inlet is extremely narrow, as on some off-road motorcycles, a gardening funnel or narrow-necked Sprinkling can is easy to use.
How did it compare to other products?
First, it is”by far”easier” than pouring directly without anything. Pouring without anything usually results in spillage and contamination of the Engine. The dirt on the dripping oil is disastrous.
Plastic funnels are available at 100-yen stores, but once you use one, you have to wash it again or use different types of oil, so it is better to have several disposable funnels. It might be a good idea to buy 10 or so in bulk since they are inexpensive.
[Points to note]
It is easy to lose it. I really don't know where it went. (Is it just me?)
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
I think the Timing I will use is when I change the Oil, so this is the area I would like to buy with it at that time.
Oil Disposal Box 4.5L Work GlovesQuantity:Set
https://www.webike.net/sd/21779950/
→Nitrile gloves are Quantities:The set is the main point. 4.5L is enough for 2-4 oil changes in Motorcycle.
Tear-resistant paper towel
https://www.webike.net/sd/24985573/
→Paper waste is definitely the way to go. I really recommend this one because it is tear resistant and can be used all the time.
View detail
Exactly
It is Exactly on the Screw part of the oil can and was comfortable to use without any oozing. View detail
A necessity for Oil replacement.
This is all you need to replace the oil yourself.
It is useful because it can be used repeatedly.
View detail
Not required, but
It is possible to inject oils without it, but it would be much easier if it were available.
It's insurance to avoid the tragedy of smashing the car body or floor.
View detail
Required for 1Liter cans
I use it all the time when changing Oil in 1Liter cans.
The angle of the spout can be conveniently adjusted with the bellows.
(It used to be included as a service when you bought Oil, but now you have to buy it separately.)
View detail
This is useful.
I use it every time I do an Oil change.
I think it is good to prepare the Oil container, but it is troublesome to prepare it, and Recommendation is such a person.
good point
It can be attached to Oil can and Plastic bottle. So it is easy to use.
It is cheap and can be stocked.
Also Exactly to the Oil inlet on Engine side.
A bad point
No.
For Sunday mechanic like me, I appreciate this kind of thing.
Don't you want to change Oil easily? Recommendation for such people.
View detail
Unfortunately, I didn't use it.
I ordered this to attach to an Oil can and pour. It did not attach to the angular PremiumSynthetic 4L can. It was my ignorance. View detail
Convenient
If you don't have a Sprinkling can when you change the oil, you can buy this.
Just replace the cap of the large oil can, super easy!
If you want to measure exactly, this may not work, but if you have a large body, you can use this to make sure it's large and strong.
View detail
Just a little too small, just right!
If it looks and feels the same as the Nozzle that comes with a 1Liter can, it's not, it might be sturdier, Exactly to the body Oil mouth! View detail
Easier to use than a funnel
The funnel can be difficult to use for some car models and Oil cans, and this is easier to use for regular 1L cans.
I think it would be easier to use if the step of the bellows was a little shallower.
View detail
Very convenient
The elasticity of the Nozzle and the fitting with the Oil can are good, and it is usable and reasonable.
NINJA400 is exactly 2Liter(1Liter can Quantity) with Oil&Oil felter replacement.:2pc), so it's very useful without jug.
View detail