Reviews
DID chain tool usage review
DID chain tools are small in size and very convenient to use.
The strength of the tool is very strong and reliable.
The method of use is very simple, so anyone can easily operate it.
It seems like one tool can be used for a long time.
This served as an opportunity to further increase trust in DID.
-------------------------------------------------- -------- DID chain tools are small in size and very convenient to use. The strength of the tool is very strong and reliable. The method of use is very simple, so anyone can easily operate it. It seems like one tool can be used for a long time. This served as an opportunity to further increase trust in DID. Powered by Google Translator
View detail
It's great that it's not difficult.
I thought Chain exchange could only be done at the Shop.
I nervously worked through the Instruction Manual and YouTube, and it was surprisingly easy.
Next, I have prepared a Chain replacement for GSX1300R HAYABUSA and will lend it to my friend.
If you use it for a few cars, it will be enough to pay for itself.
I'm glad I bought it... ♪
View detail
Even an amateur can replace the chain. (However, 27mm Glasses are required.)
Recommended Chain Replacement Tool for DIY.
Chain replacement tools range from those that cost 40,000-50,000 yen to those that cost less than 5,000 yen. To be honest, I was hesitant about the price because I use them very infrequently (maybe not even twice), but I was sure of their quality and the official videos on how to use them. I'd rather buy something for $4,000 and have it fail." I bought it with the feeling of
You can replace it without mistake by following the instructions as shown in the official video.
The point that I had a hard time was that there were no 27mm Glasses, so I used MONKEY as a substitute, which made it difficult to fix the body, which is important, and I could not use force, etc. 27mm Glasses are essential to fix the body securely. I will definitely prepare 27mm glasses next time I use it.
The 19mm turning side can be adequately handled by the Box and Ratchet Handlebar.
It is also good that the OtherParts are sold in bulk. I experienced the pin removal process for the first time, but I feel it is inevitable that I will make a mistake and bend it someday.
If you are going to replace the Chain yourself, I don't think there is an option below this (price), so I think the Cost performance is sufficient.
View detail
If you're not good at it, you'll break it. You're not good at it.
Hit it straight, don't rush, and take your time.
I didn't expect it to break... I wish I had a couple of spares.
I don't think we are in a hurry.
The work doesn't stop and it doesn't take time to make arrangements.
Do not make the mistake of matching the Chain size!
View detail
DID Kashimaru Gun Rivet & Cutter Pin Product # 4525516902113
Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery View detail
I finally bought it.
[How is it used?
I bought this to replace Chain.
I've been wanting to get one for a while,
This is a moderately high-end product, isn't it?
It's been 10 years since I put it off, thinking about how many times I'll have to replace the Chain before I die,
I decided to buy it because I mainly play Race and I thought that the frequency of Chain exchange would be there as well.
How was your experience with it?
The Instruction Manual was properly included so I could use it with peace of mind.
I used to use tools like Chain Tool only or Crimp only and I would ruin them quickly. (I would like to believe that my usage was not good)
It can be used simply because it has few configuration parts.
Also, the cans DID look stylish. Cool.
When I opened the lid, it was skunky, so I put the Sponge that came with Brake Pads underneath to make a Cushion.
[Points to note]
I think it will not be a problem if you read the basic Instruction Manual, but you might want to buy a spare pin for cutting.
If it breaks, the motorcycle will not be able to run!
View detail
No failure because it does not tighten beyond the specified value.
I replaced the 520Chain of Kashime Joint by myself for the first time.
It was a difficult Image, but with the Chain Cut & Crimp tool, the old Chain Pin removal and attachment,
The new Chain was easily press-fitted and kinked.
Chain Cut & Crimp tools are designed to prevent over-tightening during press-fitting and crimping.
I was able to complete my arrival with peace of mind because I was there.
View detail
Nicely done.
It's not something I use often, but it's a hassle to take it to the shop, and it's convenient to have it on hand, so I bought it.
I've had the experience of buying cheap ones in the past and having them break down quickly.
I thought it was a bit expensive, but it was the right decision.
As expected from ChainManufacturer, the construction is solid.
It is easy to use.
Recombination of parts and Quantities:The set position can be changed to perform a series of operations from cut to press-fit to crimp, which is very well thought out.
Plate press fit and Crimp to the specified values, respectively.
We tightened it up several times while measuring the dimensions.
The work was completed smoothly and without problems.
View detail
Cutter pin broke
I used DID Kashimaru #50 series set to replace the chain all my bike. The work is very easy but I once did the wrong way so cutter pin broke. I order new DID cutter pin #50 to replace. View detail
Keep a spare.
When cutting a chain, the Crimp pin is shaved off to make it easier to pull out,
Since it was cut at an angle, the Pin Cutter also entered and broke at an angle.
This time there was a problem with my work, but it is a very heavily loaded component,
I think there is no harm in having Spare.
View detail
I was able to work on it for the first time without any worries.
This single tool can be used to cut, press-fit, and crimp a chain.
We actually replaced 530 Chain.
I was a little apprehensive before working on it, but I found the design to be very workable.
The work itself requires 27mm and 19mm spanners and glasses, but the long size can be done without much effort,
The rigidity of the object itself allowed us to work without anxiety.
If you don't know how to do it, DID has a detailed work instruction video on YouTube, so you can do it without making mistakes.
In addition, in the event of damage, Repair Parts can be purchased for each part.
View detail
Well made product
It was a product that would not be difficult to replace Chain if only I had this.
Chain exchange was so easy that I could remember to use it once.
However, the Gold amount is a bit high. However, the Gold amount is a little high.
View detail
Box is Upgrading
I used to borrow the Chain Cut & Crimp tool most of the time, but I decided to purchase it again because I thought it would be worthwhile to own a proper tool.
The contents remain the same, except that the box has been Upgraded to a Gold box and the Instruction Manual is new.
As always, very easy to use and secure Chain exchange.
You need a 19mm Socket or glasses Wrench or a 27mm Wrench (I use a MONKEY Wrench instead of 27mm).
It is often said that the pin breaks when cutting a chain, but if the holder is firmly fixed and the pin of the chain and the pin of the Chain Cut & Crimp tool are straight, the pin will not break. I have never had a broken pin.
It is an important point to ensure that you work with Kashimaru-kun's Holder because there are positions A and B and a place where Chain's Plate fits tightly into it.
View detail
useful products
I usualy replace, reduce the chain size, or increase rear sproket size on my motorcycles, the DID cut and rivet tool can do this easily. DID tool is very solid, compact and easy to use. View detail
A useful tool to have!
I bought this to replace the RC390 OEM chain that was a bad chain that would stretch easily even after maintenance.
I purchased this product along with DID's 520VX3 (ZJJoint included).
The work method is clearly explained in the video of Mr. DID on the product page, so it is recommended that you watch that video before working on the product.
I think the product is worth the price, but since it is a Chain Replacement Tool from ChainManufacturer, I have a feeling of trust in it. I decided on this product.
I was worried about my first Crimp job, but thanks to the Instruction Manual and DID's video, I was able to work Smoothly and I am very satisfied.
View detail
I am glad I bought it. It was expensive, though.
I like the idea of working without thinking and getting the dimensions on my own.
However, due to its shape, it cannot be worked at Sprocket's place.
I need a 19mm and 27mm Spanner but I don't have one.
Instead, with 3/4in Socket and MONKEY. No particular inconvenience.
I'll leave a Memo for next time, the NORMAL Exhaust Bracket is in the way.
It is more efficient to remove the Chain Guard or Exhaust Bracket.
The old Chain seemed to have grown more than expected and the Adachi LINK was not reachable.
Before cutting the chain, the Axle should be pulled more toward the Front side.
View detail
It is still a useful gem, but ….
I used to use it on my Motorcycle, but when I gave up my Motorcycle, I gave up this Chain Cut & Crimp tool as well, and now I am returning the Chain Cut & Crimp tool as well.
For normal riding, the chain replacement is done once every few years, so it would be more reliable and secure to have a shop replace the chain, but if you want to do it yourself, or if you travel a lot of miles on your motorcycle and wear out the chain, or if you own several cars, you may want to purchase a chain.
We want to do it ourselves, so we repurchased this easy-to-use product.
It had been so long since I had used it that I had forgotten how to use it, but if I followed the Instruction Manual, I was able to complete the process from Chain Cut to Crimp without any problems.
First, when cutting the chain, I wondered if it would be better to cut the head of the pin, so I attached a carbide bar to the tip of the electric drill and tried to cut it off, but it was difficult to cut only the head of the pin, and it became more and more troublesome.
The only thing you need to pay attention to is whether or not you are hitting the pin core properly, and then just screw it in.
Next, the Plate is press-fitted, again following the Instruction Manual.
When you crimp the pin at the end, you may be concerned about the degree of tightening, but I think you should just tighten it until it hits the plate and stops.
I was afraid to crimp, so I measured the diameter of the original pin and tightened the pin in steps until the outside of the crimp pin stopped hitting the plate.
Although it is at your own risk, I think it is an excellent product that can handle a whole range of tasks as per the Instruction Manual.
View detail
Easy and reliable.
I replaced the chain for the first time and was able to follow the instruction manual without hesitation. I think it is a good product. It's a pity that I don't have many chances to use it. View detail
I bought it because I like DID chains.
I like the DID chain, so I bought it for self-maintenance. I like all motorcycles regardless of high displacement or low displacement, so I ordered a 40 series set and am preparing it together. First of all, it is possible to install a third-party chain, but for accurate riveting, we intend to use it exclusively for DID chains. -------------------------------------------------- -------- I loved DID chain and bought it for self-maintenance. Since I like all motorcycles without low levels, I also ordered the 40-series set. First of all, you may be equipped with a third-party chain, but I want to limit it to DID chain for accurate rebatings. Powered by Google Translator View detail
Easy Chain Exchange.
[How is it used?
I wanted to refresh the suspension of my YAMAHA XJR400R, but I decided to do it by myself because it would cost a lot of money if I asked a motorcycle shop.
There are a variety of chain replacement tools available from various manufacturers, but the Chain Cut & Crimp tool had a good reputation and is compact enough to store a large chain.
Another deciding factor was the helpfulness of the official Chain exchange video.
Was the one you received as per Image?
It was just as Image.
As for the weight, it is quite solid. It can be stored in a special box, which is quite convenient.
How was your experience with it?
It was quite easy.
I have replaced a Chain on a machine at work and it was much easier than the tool I used then lol.
It is difficult to get lost because you can do it while watching the video and the tool itself is also marked.
[Points to note]
There are sometimes people who break the Pin.
As shown in the video, tighten slowly at first, making sure that the angle is 90°.
Even if you break it, you can buy it as Single Body except Body as Spare Parts, which is great.
How did it compare to other products?
Although other manufacturer's products are cheaper in terms of price, they seem to have less accuracy and strength, and many cases are large and difficult to store, so we think this Chain Cut & Crimp tool is the best recommendation.
I think it will pay for itself if you use it twice, so if you think about it that way, it's a bargain lol.
Point and hang of installation
Anyway, I think it is to be done carefully and slowly.
When press-fitting, it is best to measure the thickness of the other pieces with Caliper.
[ITEMS TO BUY TOGETHER
27mm and 19mm Wrench are required.
View detail