Reviews
Expensive but satisfactory quality
It can be easily attached by simply co-tightening the screws on the back of the Meter.
The design is good and it doesn't blur, but the headlight is reflective, so if it bothers you, you may need to take countermeasures.
View detail
Slider makes me feel at ease.
The fit is not so noticeable because of the small size of the body.
I like it. I hope it will be useful when the time comes.
View detail
Screen
[How is it used?
It was just as Image.
It was easy to install
View detail
Fits: TRIUMPH TRIDENT 660, TRIUMPH STREET TWIN BONNEVILLE
For those who do not like Bar end mirror
The OEM Bar End is one size smaller than the OEM Bar End, but the size and feel are the same. The quality of the Bar End is so good that you will feel like you have replaced it with a new one. It takes about 2 months for delivery, but it is worth the wait because of the low price. I bought the babyface one, but I prefer this one. View detail
It was worth the wait.
After waiting for less than 3 months, it was finally delivered.
The Instruction Manual is an English version, but you can understand it by looking at the pictures.
The Screen bracket is installed behind the Wiring (see the picture), so you need to move the bracket to a place where it won't be a hindrance. The only hassle I had to deal with was that part, but I was able to install it easily by temporarily fixing the Screen and Bracket, and then installing the Bracket.
The edges of the Screen have been treated well and look great, no complaints.
As for the windproof effect, I feel that there is more than I thought, and I think that some effect can be expected.
View detail
Fits: MV AGUSTA BRUTALE 11, MV AGUSTA BRUTALE 11
External mirrors can be installed.
F4-BRUTALE cannot be installed on an external mirror.
BARRACUDA Barracuda Mirror Adapter (Pair) It is possible to install an external Mirror by using
However, since it is a blinker-integrated Mirror, the blinker needs to be placed separately.
That's part of the fun.
View detail
It's just a pain in the ass to install (GSR750)
It's a pain in the ass to install, and when you're running, it's going to come off a little bit
Be prepared to buy it
I think the design is very good
(I bought it because I fell in love with Design, even though I knew it would be a hassle.)
I changed the attached Screw to Stainless Steel because the rust came out after about half a year, and also I changed the RubberWasher to the light resistant silicon rubber type at
When you install the Hexagonal Wrench long and short ones, 3mm to 6mm each quantity inmm:If you have the Set, I think your work is Smooth
Lightly remove the headlight (Long Hexagon)
Temporarily fasten the supplied Bracket
Put back the Headlight and tighten the Bracket (Short hexagon.)
Cowl installation
I installed them in the order of
The wind protection is not that effective, so if you are a long-timer, you can use the YOSHIMURAScreen That might be a good idea
View detail
Fits: DUCATI HYPERMOTARD1100 [Hypermotard]., DUCATI HYPERMOTARD796 [Hypermotard]., DUCATI HYPERMOTARD1100 [Hypermotard]., DUCATI HYPERMOTARD796 [Hypermotard].
mostly good
The OEMExhaust System was removed so the muddy water in the rear tire is behind the Seat Remove the Chain Guard and install it at three points, but one point is The position of the hole is different from that of the OEM Chain Guard If you look closely, you can see the resin capped holes and the slotted screwdriver is used to remove the resin The position of the three points is aligned precisely Functionally, there is no problem, but I feel that the price is a little high View detail
Small while you are getting Large Kid effect
Of course I will lose to Cowl and others, but I think that a satisfactory rectification effect was obtained with a compact Screen.
Specifically, the cruising speed on the expressway has stabilized at NORMAL.
Although the price stretches, the shape is unique and satisfies ownership desire.
In the future I would like to consider Bikini cowl and Semi-cowl, but now I still have few choices and it was a pretty hesitant choice.
You can also take advantage of NORMAL's appearance, it is a very satisfying item.
If the price drops a little more, there is nothing to say.
View detail
Fits: DUCATI HYPERMOTARD1100 [Hypermotard]., DUCATI HYPERMOTARD796 [Hypermotard]., DUCATI HYPERMOTARD1100 [Hypermotard]., DUCATI HYPERMOTARD796 [Hypermotard].
It's not very good
Instead of Exactly the position of the hole to insert Screw gaps slightly, but it is not bad because it looks like OEMParts, familiar with Motorcycle. View detail
Looks better than anything else
MT-07 So without a shield is cool but I wanted to relieve the wind pressure by everyday commuting, it was expensive but it was expensive but it looked like Barracuda so it was Large Correct Answer. The effect became easier to run many times than without Shield and Style was also not incongruous so the feelings I wanted to ride more than before increased. I installed it in 20 minutes because I am a dexterous person so much less trouble. Parenthesis Choose by priority! View detail
The appearance has been tightened
Looking for a good Screen and looking for ... ... Results It was a correct answer. It also tightens its appearance, feeling good without damaging the original design.
Windproof effect may not be so much, but overall it is satisfactory.
View detail