Reviews
This thickness is good.
GlassesSpanner for Top cap was purchased at the same time, but Material:Plastic is good. No need to put Wound on delicate parts. I guess Technics, the SuspensionPro shop, has done a good job. View detail
PRO Tool.
This product is a must-have for O/H of inverted suspension. Technics' products are really safe and easy to use. View detail
PRO Tool.
This is a nifty tool from Pro shop Technics in Suspension, if you don't want to put a Wound on the Top cap. View detail
Used for Overhaul of Front fork.
There is just a little bit of BALI on it, so it might be better to finish it with a light file before use. 。 It is made of Engineer plastic-like hard material, so it won't nudge Cap's head unless it is very hard to do so. View detail
Special Tool for CBR1000RRRSHOWABPFFork Disassembly
Special Tool for InnerCartridge removal of Big pistonFork. 90N tightening, so loosening is Large.
The Torque is tightened by hand and that's it. Why do you tighten it with such a stupidly strong Torque?
View detail
Special Tool during CBR1000RRRSHOWABPFFork disassembly.
Special tool required for removing and installing the top cap. octagonal. View detail
easy to use
Easy to use, Inverted Front Fork cannot be done by hand. View detail
XR1200X for Front Fork
Tool only for removing the top cap of the front fork.
Well, it's as close to SST as possible … or is it SST?
The texture is Cut-out and good.
I use it once a year or not.
View detail
I ordered it for use on a newly purchased vehicle.
While purchasing and installing tubeless wheels on a newly purchased vehicle CT125, tighten the spokes during initial break-in.
Purchased for a purpose. different sizes and torques
It can be adjusted and tightened, but the range of torque is different from other products, so it is suitable for use on spoked wheels for motorcycles.
I bought it because it has the best range and I use it well
there is. -------------------------------------------------- -------- Tighten the spokes when the newly purchased vehicle CT125 is purchased and mounted and mounted. Purchased for purposes. Various size and talk It can be adjusted and fastened. It has the best range, so I bought it and used it well there is. Powered by Google Translator
View detail
Inverted Front ForkMaintenance Essentials
If the spring is just under the fork cap, I could manage to shrink the spring by force, but if there is a collar under the cap, it slips on the oil and there is nothing I can do. I think it is a necessity when replacing the oil of this type of Inverted Front Fork.:Once set and positioned, you can shrink it with a ratchet or similar tool to reach the point where you can safely disassemble it in a matter of seconds. View detail
Safety is something you buy.
I used to use a homemade SST.
It was an extremely dangerous job.
It was dangerous and time consuming.
I thought it would be expensive, but I bought it.
If used in conjunction with Impact, the objective is achieved in seconds.
You should buy one if you're so worried about it.
This is especially true for those who use it many times.
This is a must-have for KYB inversions circa 2000.
View detail
I can work carefully and well.
[How is it used?
I used it for pre-road adjustment of CBR1000RR-R SP.
Even though the suspension is electronically controlled, the pre-road adjustment is an analog manual adjustment.
Suspension This is a place that is touched only when setting, so it is infrequent, but when it is touched, it is a place that is touched repeatedly and persistently.
In that case, this tool is used.
Was the one you received as per Image?
It was generally in line with Image.
Material:Being a Plastic tool, the texture is as Image.
The accuracy was better than I expected and it was Exactly on the 32mm head without any BALI. (Maybe a little tight.)
Very easy to use
I also had a very strong impression that it was lighter than I had expected.
This is pretty easy to use and I'm glad I don't seem to have any Damage when I bump it somewhere. LOL!!!
How was your experience with it?
It's a place that is used for pre-road adjustments, and when you touch it, you touch it a lot.
This is the part where the expensive Suspension thin Anodized Treatment is done.
If you try to use tools made by Gold, you will get scratches in no time.
When this tool is used, there is no Damage to Anodized at all, and yet there is no feeling of lack of power.
It's so light that it wasn't hard to retool it over and over again.
[Points to note]
Not particularly, but if I had to say.
The handle is long enough to be used as a fork cap, so please be careful when handling it.
How did it compare to other products?
Material in this Large size:There are not so many Plastic Wrenches, and even if there were, they were all moderately priced.
It's a relatively inexpensive item, but it works well and I'm satisfied.
Nevertheless, Material:This Large size tool from Plastic could be a bit cheaper, couldn't it? lol
Overall, I'm very pleased!
View detail
Dedicated Tool is pleasant to use.
I bought this to loosen the top cap on my Showa Fork. It was easy to use and perfect for loosening the delicate top cap.
Material:I was worried about the durability before I used it because it is made of plastic, but it seems to be made of engineering plastic and there seems to be no problem at all.
View detail
It's a scratch, but it works.
It is a necessity to turn the thin hexagon of BPF. It is recommended to use it after applying one sheet of masking tape or Vinyl Tape. View detail
For Fork cap only:a good product for an itchy area
Functionally, it is no different from Straight's Glasses Wrench, but
Material to avoid scratching the Fork cap:Plastic
32mm is not a size that we use very often
I used to protect it with Dustcloth and tighten it up with Pliers wrench
It's still easy to use special products
View detail
very good
There are many people who are working in their own works, but once you buy it you can use it for a long time so I was happy to buy it, usability is good There is a sense of security, as expected it is recommended, recommended. View detail
It was easy to use
I bought it to replace the 3XV Fork oil.
Not all Inverted Front Fork is necessary, but 3XV can not work without this tool.
If you examine it with Net etc, there are some who are making homebrew tools by buying L-shaped Bracket etc. at Home center, but I will recommend this Compressor at this price.
Although manual is not attached, I think that it can be used without problems.
View detail
Extremely convenient
Useful when removing Fork top cap.
Exact length and moderate hardness.
Top cap is not scratched.
It is recommended for those who are regularly serviced.
View detail
BFF also
Since BalanceFreeFork of GSX - R1000R also had Top cap of 45 mm, it purchased.
I was convinced of the price with the Cut-out of the rain.
Like the Socket wrench's PowerFit, the groove is digging so as not to damage the BoltHead's Edge and it can be likable.
View detail
It will not be talked about it without it
It is essential for people who OH for Front fork by myself.
The price is also affordable and very easy to use compared to other similar things.
We almost no longer use force for disassembly and assembly.
View detail