Reviews
Smartphone cannot be fixed properly
I chose the RAM Mount because I thought it must be a good product since many people use it and a large percentage of Len BarrelMotorcycle models are equipped with it. However, the holding of the X-shaped retainer is not so good, and the Smartphone gradually gapped on a motorcycle with a lot of vibration, and before I knew it, I had to press the SIDE button. Also, when the X-shaped retainer is expanded to hold the Smartphone, it rotates by the amount of the expanded angle and cannot be fixed. It was not easy to use, so I immediately replaced it with another product. View detail
Mobile Holder
I bought this for navigation on my phone, but I read on the Net that the iPhone's Camera function can break down if it's fixed too tightly…
Not sure whether to use it or not.
View detail
Too big and inconvenient
I've been using it for two years, and even if I want to move it a little, I have to take the Dial key out from under the Seat and turn it...
It's just a little thing that takes a lot of time and effort.
Cause it's too big and I don't want to put Dial key in Pocket.
I think it is possible to make it smaller, but it is being made in a haphazard way, and if it were in Japan, it would be improved, but since it is made in Japan, it will not progress.
If you use it with a short arm, the lock dial itself will be too large and the direction will be restricted.
Security is high and Ideas is good, though it is a simple structure that doesn't break, but it is a waste!
I've stopped using it now, maybe I'll use it when I go on an overnighter, but until then it's in storage!
View detail
After contacting the distributor
I installed it because of the high ratings on reviews here and there, but it was disappointing.
It's still a Compact, grippy and good looking Holder, but the vibration of the phone when it's running makes it feel like a Quantity:Pair (for Left and Right) to rotate and slant.
I tried it on a sample from a mass merchant to see if there was any difference in quantity:Pair (for Left and Right) It turns into a
I contacted PLOT, the distributor, and I knew that
If you don't have an object in the XGrip, it won't work, but if you have an object in the XGrip, such as a smartphone, it will not work.:Pair (for Left and Right) The answer is that it is the original product spec. that goes around to
What do you think? Do the people who are giving it high marks here and there just not care?
I've never seen a Spec. smartphone holder that rotates and tilts the phone at an angle due to vibration.
I don't think it's possible as a product.
View detail
At first I thought it was a good idea, but then...
It may be individual difference, but the non-slip Silicon of the foundation was not covered firmly, and a part of the bottom aluminum plate was exposed.
It's not a cheap product, and that alone is uncomfortable.
Also, the manufacturer and purchaser were very unresponsive and I ended up using them as is.
On the iPhone 7, if you pinch it with the XGrip, it will interfere with the volume buttons, so the fixing position is limited.
Also a stick that's gripping even when fixed? It is quite wobbly. Even if I try various things, it does not improve.
If this is another individual, I think they sold me a defective product.
I'm disappointed in this product, as it doesn't have a bad reputation.
View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
You don't look as pretty as your picture.
When I arrived, I was surprised to see that his appearance is different from the photo. It's dirty, to say the least.
It became the appearance of the picture if it was processed by Paper processing for the first time from File hanging and polished by PIKAL.
The problem with this is that the smartphone holder cannot be tightened with a tool even though it has 10mm screw, and even if it is tightened with a finger, the smartphone holder starts to turn by vibration. It will fall off before it is stolen.
The solution is either machining it so that it can be turned with a tool or gluing it in place that won't come off forever. I'm the former.
I recommend it because it makes effective use of the Mirror Hall, which was only blocked up until now.
processing plan
? I'm going to punch a hole in it like I did.
Because the diameter of the root of the screw has become Large, shave 2 sides with File so that the Spanner may enter.
Firmly grab and turn it with ?Pliers. You need to be prepared to get a lot of scratches on the shaft.
? Solidify with high strength screw lock agent
View detail
I used it and it wasn't much.
Quantity:I bought this set because I thought it would be convenient, but it is not a good idea to use it to attach the mobile phone to the body of the Since the part is not fixed, the angle can change easily. I thought it was a bad idea to use it with it on. If it's another type, you can fasten the body and arm part with bolts. If you're going to use it on a Motorcycle or bike, buy the Type sold at RoseRose. Recommendation. View detail
7InchTab turns diagonally while running.
It can be said to be exclusive for iPad mini, in the pinched part
In the 7 Inch Tab which can afford a margin, while driving
Quantity : Pair (for Left and Right) It will be Gap this much.
The plastic part of the pinched part breaks in the screw Brett Holders,
There is no decision strike ...
View detail