Reviews
Excellent Smartphone Holder
The three Parts can be installed in a variety of ways
Custom to your liking (^^)
The sturdy construction means you don't have to worry about your phone falling out
It's very good to use, and it's excellent!
View detail
Large I like it
The actual running is not yet, but it is fixed firmly, and the installation rubber part is soft but firm Hold is ready
We will check for shaking, looseness, etc. when the car is running
View detail
In the meantime I was able to install Smartphone Holder without using U-shaped Clamp.
Because there was a difficulty in mounting the U-shaped clamp, purchase it as an alternative option. Honestly I think that angle adjustment of the Ball part is unnecessary, but I'm glad that it was possible to install at a good angle.
After that, worry about how much vibration of SR will affect durability.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Judo
I tried various ways to attach a smartphone as a navigation to a vehicle, but each one has its advantage. I use Handlebar Bracket's Screw
This product remembers even a kind of emotion in its simplicity and cleanliness.
As RAMMAUNT says that the appearance is dirty and says to the item explanation from the beginning, the finishing of the details is not done almost
There is no problem at all. It feels a little expensive in terms of price, but I am glad that the function exceeds that feeling.
View detail
It can not be fixed with the installation according to the Instruction Manual
In the accompanying Instruction Manual, the Equipment Rubber plug (Conical Rubber) Insert it into the Stem, mark it in the protruding part, and 1 inch towards the direction where the tip becomes narrower from there (About 25mm) Marked the part and marked it cut in two places - - - There is, but it can not fix well with that.
When inserting into the Stem, cut the part about 10 mm further downward from the upper part, 1 inch towards the direction where the tip is getting thinner (About 25mm) Cut the part of. If you insert it in the assembled state, it will completely enter inside as soon as you plug it into the Stem. This is a miso.
Also, use Washer and Nut anchor Attachment to choose One size Small thing from Limit entering Stem. Nut that is in Set is also Nut with locking prevention, but I use normal Nut. Even if you tighten it with a loose stopper it will rotate together.
Also, when installing, it is hang to inflate the Rubber to the very last minute not to get into the Stem if you do not do your best by tightening Bolt. If you tighten in this state, you can not fix it completely to Firmly, but you can fix it quite steadily.
View detail
Good texture, easy to use, easy to fine-tune
I thought that it would be more convenient to have a smartphone in a touring, and various colors. And this is what I got. Usability was good as expected, but it is slightly unexpected that the X grip position fixing the smartphone slightly interferes with the charging terminal of the smartphone.. Basically, I use navigation while feeding. I wish I could shift the smartphone either up or down, but I wonder a bit of being unable to grip the center of the smartphone.. It seems there is no problem with an iPhone, it interferes with my docomo 's smartphone ... So I'm talking about buying anything other than X grips. But, I am satisfied with the easiness of attaching and removing a smartphone, holding power, so four stars. View detail
For ipad mini 4 Navigation
I use it to fix ipad mini 4.
Since this product Single Body is weak in fixation, it can be fixed firmly by using it together with X-Grip holder UN 8.
Ipad mini 4 can be used even in the rainy season by using Case cover of Life proof sold separately.
View detail
Convenient.
When using a smartphone that is no longer used as a doreco, I bought it because it does not face the front of the car body.
Although it is possible to rotate 360 ??° at the Center part, if you try to tighten the Screw, it seems that the part to be fixed is determined, so it may not be fixed in the place you like. Still, I could bring a smartphone to my favorite place with a fine adjustment with Ball joint on Base side and Ball joint on Holder side.
View detail
theft / To prevent mischief
It is transfer from ArmlockRAM-KNOB 3 LU.
Compared to RAM-KNOB 3 LU, it looks a little SMART.
There is no BALI, but it is a good or bad "RAM Mount" build.
There is no problem in function.
View detail
I think it's good.
StemHolder for in-vehicle video
RAM Mount so do not hesitate
I tried purchasing this.
Hold is also solid
I think Smooth is good for removal
is.
Stem and Jointetc. Owning
Because it was, it cheaply got up
When it comes to arranging all from 1, it is
It may be expensive - -
View detail
I use it conveniently for the price
Among highly scalable products, I think that it will become cheaper one.
As in the notice of goods, as a finish feeling
It's not really nice, but there is no problem with regard to mounting accuracy.
Mainly uses Iphone 6 with Cover.
There is nothing like falling.
View detail
Screw attached is more user-friendly if you install GoproOEM's
The product here is made in United States and the construction is solid, but the details such as painting are bad (There is no problem in use) So it is not suitable for nervous people.
I purchased this item for the third time because it is troublesome to replace every Housing in Gopro.
Since the supplied tightening Screw is only an ordinary screw, I think that it is more user-friendly to install GoproOEM or similar screws for tightening screw Parts.
View detail
For in-vehicle Camera shooting
I am using the ActionCamera named GC - XA 2 of JVC to shoot in - vehicle movies.
There is also CameraHolder without Plate, but when setting Camera, I purchased with Plate because the inclination is easy to understand.
In the case of GC-XA 2, even if Screw is inserted deeply, since a gap is formed with Plate, we use 5 mm Sponge in between.
Several holes are open in Plate, so it seems to be useful when working on something.
View detail
For Camera shooting
* Product description is about 13 Length. It is written as 5 cm, but actually it is just 15 cm.
I think that it is unnecessary length for people using Rum Mount as Smartphone Holder and Navigation Holder, but it is quite useful as a car camera camera shooting.
I installed U-shaped Base on Motorcycle's Handlebar, from there Arm + CameraHolder (With Plate) I attached a camera to shoot.
My Motorcycle (CB400SB) In case of 3 Inch StandardArm set vertically and shooting, the screens and the surroundings of Meter are reflected by all means.
However, with this 5-inchesArm, you can shoot the front view to the full screen without copying the screen.
I like the scenery which is different from the picture of the screen over Screen.
I think that there are no losses if you have a car Camera faction.
View detail
Essential items to connect Arm
It is a part for connecting various Arm of ram mount.
I bought it for shooting with car camera.
Since you can move the angle freely, you can connect the Arm straightly to earn Length, take a picture slightly drawn from the same height by connecting it in an L shape as shown in the picture, angle it, depending on the ingenious width Spread.
It is convenient to have something.
I was worried that the Joint part was 2 cm longer than I thought, the rigid Large would be durable, the image would be difficult to see with vibration, but there was no noticeable vibration and a beautiful picture could be taken if it was an L-shaped tethered picture.
However, when I purchased another Ball joint for trial and set it by connecting three Arm 3 diagonally, the picture shook heavily and I could not use it at all.
(I think that there is no worry of vibration in minutes to connect Arm straightly and set vertically. )
It is a convenient Ball joint, but only the price is dissatisfied.
Although it is such a small part Joint parts, it is the same price as Arm.
I wonder if it makes at least 1000 yen.
View detail
For Navigation for Motorcycle, it was a little Large
I thought that I can use nexus 7 which I have for Navigation for Motorcycle, I purchased this product.
However, when it comes to 7 Inch, there is a considerable sense of oppression around Handlebar, I think that it is too little Large.
Since the making of the product itself is solid and can be securely fixed, there was no problem.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
You do not need to stand out
I bought to mount Gopro around Handlebar. Because Gopro is not used at the time of town riding, I like this product which the mount part is inconspicuous when not in use.
The color of Bolt in the picture of product description is Silver color, but I bought Black color.
There are BALI etc. in the Ball part, but I think that Cost performance is good because the price is cheap.
For people seeking texture, I think that SYGN HOUSE etc. are better.
View detail
X-Grip holder
I was anxious to be honest because it only supports at 4 points,
It did not fall even if it was swinging with full force with hands in a fixed state.
In addition, Touring of over 500 km (Including high speed driving) But there was no problem.
View detail
It is a rhm Mount truly.Although I am using i phone 5, I am using adjustment on either side and a Hold of the up-and-down Spring, feeling easy satisfactorily at all.
It is a rhm Mount truly.Although I am using
i phone 5, I am using adjustment on either side and a Hold of the up-and-down
Spring, feeling easy satisfactorily at all.
View detail