Reviews
Strong enough Base.
I installed it on 2020 YZF-R1.
warp and woof
I did not want to affect the handling of this motorcycle, which is said to be the Yamaha of Handlebars, when installing the Ram Mount, and wanted to install it in a place other than the Top Bridge or Stem Mount, so I bought it to co-tighten with the Tank fixed Bolt.
good point
Because it is a ManufacturerOEM, the most important strength and connectivity was not a problem at all.
I'm happy to say that I can't find any bad points this time.
Installation
The diameter of the bolt I bought is M8, but the diameter of the Tank fixed bolt is M6, so I put a collar in this mount to adjust the gap, and because the length is not enough, I bought a new Stainless bolt and tightened it after applying Aluminum Grease.
You may not need such information especially, but this Bolt Base is sold only M8 or M10, so you tend to give up when Size is different, but if you do it well, you can install it anywhere you want, so I hope you can install it with ingenuity without giving up.
I'm not sure what to make of it.
View detail
I could have used a large phone.
[How is it used?
Touring
Was the one you received as per Image?
Rakuten BIG is available in Large size.
How was your experience with it?
It's quite stable.
[Points to note]
nothing special
How did it compare to other products?
A large phone can be attached.
Looks cool.
View detail
Same ease of use as standard Arm
I was using a standard arm, but with the change in mounting position I wanted to use a short arm
In my case, when I'm not touring or in places where I'm worried about theft, I leave the Arm attached to the XGrip and remove it.
However, since there is no spring in the short arm, when the Knob is loosened, both sides of the ball support become empty, and the Neck is not so easy to use.
So, at my own risk, I put the Spring for the standard Arm through the Bolt of the Short arm, and put the GripBand for the Bud MINTON on the side I didn't want to remove, and it became the same usability as the standard Arm!
It seems to be durable because it doesn't come off because of the cone shape, and it doesn't cut or crack though it has passed nine months since I installed this Band!
I feel like I'm doing an impression of the GripBand! (Lol)
View detail
He gets the details right.
This is the only one I decided on after much deliberation and a thorough look at WebikeMagazine and other publications.
The latest version of the 2020 edition of the article can be found here.
[https://www.webike.net/magazine/must-buy/must-buy-electronic_parts/47524]
When I was using Anroid, there was no problem, but as soon as I changed to iPhone, I was caught in the trap of the pincer type that says the volume button is pressed and held down.
However, however, I can still use it comfortably today without being pressed for too long by adding a smartphone cover.
After a year of purchase, unfortunately, a piece of the locking rubber (the one that stretches and vetches, not the one that pinches) has torn off, but it works fine with all four sides working.
I think I got a good purchase with no weird leaning, dislodging, or turning away while driving.
View detail
Easy to put on and off, won't break, your phone won't fall out!
The one I own is slightly different from the current one because it is an old MODEL.
BALIUS? (Domestic 4-cylinder 250cc NAKED) It has been used for 8 years and over 100,000 km at
From this point of view, it's proven to be the best when it comes to durability.
Installation of the phone can be done in seconds due to its simple structure, but you need two hands to put it on and off. But if you can fix it in place, your phone will never fall out, whether you're driving through the woods, going full throttle on a bumpy Winding road like Irohazaka, or doing the highest speed challenge, you won't even have to worry about the Gap.
I have so far had absolutely no problems with the four rubbers on the part of the phone that grips the phone dropping out or tearing or deteriorating.
According to our friends at Forest Road Rider, the phone didn't seem to fall out when the Motorcycle made one turn sideways on the slope.
Material:There is no discoloration or cracking of the surface and no sticking to the surface, which are common in plastic products.
The product is top notch, so now it's just a matter of choosing the Clamp and which Arm to use on the body side.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
The Greatest Thing Behind the Edge of Unbreakable Support
It is a little different from the current one because the one I own is an old MODEL. At the time of purchase the Bolt that came with the Ballius at the time of purchase prepared Stainless bolt on its own because the length is insufficient.
BALIUS? (Domestic 4-cylinder 250cc NAKED) It has been used for 8 years and over 100,000 km at
From this point of view, it's proven to be the best when it comes to durability.
It is a base for installing the kit, which can be fixed firmly and securely without breaking it and also supports the upper kit firmly. If it's fixed properly, neither the kit nor the phone will ever fall out, no matter what you do, whether you run through the forest road or the bumpy Winding like the Iroha Slope with full throttle of Axel, or the maximum speed challenge, you won't have to worry about the Gap.
According to our friends at Forest Road Rider, the Motorcycle didn't seem to break after one turn sideways on the slope.
Material:There is no discoloration or cracking of the surface and no sticking to the surface, which are common in plastic products.
The product is the best, so now it's just a matter of which Arm you choose...
View detail
No trouble♪ No complaints
BALIUS? (Domestic 4-cylinder 250cc NAKED) It has been used for 8 years and over 100,000 km at
From this point of view, it's proven to be the best when it comes to durability.
The installation is simple and easy, and the large-textured Knob holds it firmly in place. I've been using it with a little bit of tightness and it has never come loose naturally.
Material:There is no discoloration or cracking of the surface and no sticking to the surface, which are common in plastic products.
The product is top notch, so now it's just a matter of choosing the clamps on the body side and what length you want to use.
View detail
Can be combined with parts for SystemUp
There is a wide variety of parts that you can combine and system up as you wish, so you can clamp what you want in the position and angle you want. The price of the parts is reasonable and the cost performance is satisfactory. View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
The good?
Mirror installation Screw on Handlebar "M10. For.
Although it is a mirror co-tightening, it is about 3mm thick, so if you want to change to a bar end mirror, BlankScrew L=10mm. is too short to use.
View detail
It's all good.
This is for the RAM-HOL-PD3U.
That's what it's for, so it comes with it.
The construction of the ball catch is also good, so it can be Firmly fixed.
View detail
Hold tight!
If you configure it with only RAM MOUNT, there seems to be no problem.
It's not too long or too short and fits into the Compact around the Handlebar.
I drove about 400km and there was no lukewarmness, wobble etc.
View detail
Almost good
It usually comes with a Small Type phone as well.
Since the possibility of a fall due to vibration is not ”0”
I use it with Magic Tape.
I've got about 400k miles on it, and so far I haven't seen any rattling.
If you configure it with only RAM MOUNT, there seems to be no problem.
View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
If you want to mount a GoProMount on your vehicle, this is it.
I took advantage of the hole in the vehicle's body and installed it for the GoProMount.
You can install it in any position to enjoy powerful images easily!
View detail
Variation-rich rum Mount
I wanted to install a GoPro on my car body to shoot from various angles, so I installed it.
You're right to buy the Long arm, which the GoPro OEMMount doesn't have!
Material:Aluminum for strength!
View detail
Good!
It's a pretty reputable product on NetReview.
I've always been curious about this product, but had to pass on it because of the high price, but I finally installed it.
As a result, it's very easy to use, more luxurious than other Smartphone Holder, and Slim and Stylish is very good.
I think it's more like a Motorcycle Parts than a Smartphone Holder and it's integrated.
It is a product that is easy to detach and is considerably excellent in convenience.
We'll see how durable it is, but it looks pretty reliable and expected Large.
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
Right on!
This is good, it fits the 10mm Mirror including the Clearance.
It's light and bulky, and the texture is solid. I'm satisfied with the overall compactness and high quality even with the full RAM set including Arm.
View detail
It's light!
I was worried that it would be too heavy because of its heavy texture, but when it arrived and I held it in my hand, I thought it was light! I thought.
It is lightweight but has a high quality and solid impression.
We will see how durable it is, but I think we can expect a lot from the lightness and texture.
View detail
Easy to loosen and hard to loosen.
It is convenient that you can adjust it without any tools. The Mount allows you to set the angle and position freely, so you don't have to go through the hassle of readjusting it, which is a high point.
It's great that it's both hard to loosen and easy to loosen.
I think that the workmanship is the best among the parts of RAM Mount.
View detail
No need to worry about falling.
I'm mounting my iPhone8.
I've been using it for two years and it has never fallen off due to vibration or anything else.
That's a great Ram Mount.
View detail
The required Bolt length is about 28mm longer
The painting of the Screw mounting part of the seat is weak. When I installed it today and tightened Screw once, the paint of the Screw mounting part came off. Because it is not visible, it may be all right, but when you use Titaniumium Bolt, electric corrosion is a point of concern.
Compared to the original M8 Bolt, the bolt length required for this product is approximately +28mm, so you may want to decide whether you want to use +25mm or +30mm Bolt depending on whether or not the screw hole of your M8 is Penetrating Hole.
There is a Bolt set item available, but this item is without a Bolt. You can use any bolt you like or you can choose the bolt length you need from the quantity:If you can't cover with the set product, this is a good choice. It is also depressing to have more bolts that you don't need.
View detail