Reviews
Happy!
Touring, and without knowing it while driving, one of the Rubbers flew away and I was in danger of finding myself in My phone was about to fall off
I ordered a Rubber in a hurry!
Ram Mount has a Parts sale, which helps
I installed it right away
I even glued it well this time!
View detail
Pretty good
Until now, cheap Material:I used to use plastic ones, but the UV light made them white and brittle, and they look good It wasn't This one looks great, plus the phone stays firmly in place and doesn't seem to fall out at all However, the price is a bit steep View detail
Used for the Stem Mount on your phone
I use it for the Stem Mount on my phone
Mount KitMulti Bar Holder from DAYTONA (95442) and M8×80 Cap bolt can be combined with the Smartphone Stem Mount can be used with a Separate handle that has few attachment points for It can be installed in SMART
View detail
Good product
I've been using Daytona's Quick Type mobile holder for a while now
Adjust with a commercially available transparent Hose
It was attached to the Handlebar Brace
But … every time I install it, I have to adjust the bolts and so on a little bit
annoying
I was wondering how I could find this guy
I've seen it installed and it's nice and easy to install
The Clamp is also very sturdy and won't move with ease
The main issue is that I'm totally fine with my phone and driving at high speeds
By the way, the Motorcycle is NAKED There is a certain amount of wind pressure
However, it is a little disappointing that the place is a little bit tilted when it goes over the Decoration depression in the construction etc
Even with that, it's great
I'm going to use the instant glue that comes with Rubber, but that guy is pretty strong and gets on your hands easily Caution
View detail
Reliable RAMMounting system
I was worried because it is only supported by 4 points of Rubber, but it didn't budge from the vibration of the road bumps Clamp force
I am using my iphoneSE as Navigation I remove it when I go into Convenience because I'm worried about theft
View detail
Material:Clamps firmly in Aluminum
Buy as an XMount Clamp. iphonese installed Navigation I use it as a It is safe to clamp firmly without loosening by vibration View detail
Manufacturer for Peace of Mind
Fixed MONKEY125Handlebar in Two League, used for Navigation Size of Nut is Inch or Spanner does not fit I used MONKEY Wrench
View detail
just right
Motive for purchasing
I've been using RAM MOUNT for a while now, but I thought Arm was long enough to try a short one I decided to buy it
Good points
The length is just as long as I thought it would be, and it's a great help to me to get rid of some of the metering that was difficult for me to see I did
Installation difficulty
The Clamp part is attached, so you only need to pinch it
View detail
heavy
One word:heavy
if you have an iPhone, take the SIDE button
I'm thinking of going back to DAYTONA in a few weeks
it's not a good idea for iPhone users
View detail
good
With the RAM Mount, it's a rubber for smartphones purchased for Daytonaradar installation It's too tight and tearing, so I chose this one? It came out good! View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA CG125, HONDA SUPER CUB, YAMAHA XSR700, YAMAHA MAJESTYS, YAMAHA Tricity155, YAMAHA BirdCity, KAWASAKI BALIUS250, SUZUKI ADDRESSV125, HONDA CROSS CUB, HONDA CBR250RR
Most useful mount by Ram
On a scooter like the Honda Zoomer of Ruckus, there are endless possibilities to attach this 1" ball mount. The primary purpose is for it to be mounted to a mirror stem, which makes the hole size of 9mm a strange choice since most mirrors are 8mm or 10mm fittings. If would have to be drilled out for 10mm and fits too loose for 8mm. I found an unused hole on the left handlebar control on my Honda Ruckus, it's next to the mirror stem and is a perfect position for attaching my cellphone X-Grip holder. As you can see from my picture, the black finish is missing from around the neck (this it when it was new before it was ever mounted). I've noticed a slight dip in quality of more recent Ram products although they are still made in America and function flawlessly. View detail
I don't feel safe
This product was recommended to me by a friend of mine, but I've been buying it for Firmly and Case until now I was worried that the smartphone holder is not suitable for this type of smartphone I couldn't change to a smartphone holder with a pinch type
However, when I switched to this Ram Mount, I realized that the price is a little high, but the performance is worth it I could
I don't have to worry about slipping and shifting when driving on the highway or in the rain You can't stop the smartphone from being pinned down, but you can use it to stop the smartphone on top of it I think it is unlikely to be dropped because it is attached to the Seat of Rubber
The joint part can be changed by loosening the bolt that can be turned by hand, but the handlebar One pcJoint is placed between the point where the smartphone is fixed to the With the arm in between, you can adjust the position to suit you without shifting the fixed point You can
However, although the range of motion is wide, the orientation is related to the orientation of the Clamp that secures it to the bar It is better to have an image of the image you want to use before you install it I think
Moreover, I had attached it directly to the Handlebar at the time of purchase, but the Handlebar I bought the Brace and put it on there so I have more freedom than I ever had before
And the Type to put the Smartphone in the Case of the Type that I was using until now The difference between the two is that the body directly touches the controls when you stop and operate the device Easy to operate
The Smartphone used to get hot very quickly, but it would get hot and stuffy The smartphone no longer gets hot
It's important to note that it will get wet directly in the rain, so it is not waterproof It's about the only place where you have to be careful about the weather when using your Smartphone!
View detail
As a security measure
As an anti-theft measure of Ram Mount:XGrip which was introduced just last month, I introduced it The XGrip is fixed to the Base with a short arm, but.. A fixed KnobSpec that makes it easy to turn a short-arm fixed Knob with a sense of security 0 Because of such spec. it's easy to park for long periods of time or in unpopular parking lots! Also briefly! It seems to be taken away If the damage is done, the XGrip and the short arm alone will be worth a lot of gold The system was introduced as a self-protection measure before the damage was done
The structure of the Security Knob is a two-piece structure After tightening with a special key, the perimeter of the Knob can be turned freely, just like a standard fixed Knob To, by hand, easily! Also briefly! You can't turn it Also, there seem to be several different Patterns for the special key Knob I can't find out the pattern of the key after I buy SecurityKnob and receive it I'm looking forward to seeing which pattern will arrive Once the key is fixed, it is not used for anything other than fine tuning and re-tightening I think it would be safer to keep it in your room If you lose your key, you won't have a security number, so you won't be able to get a dedicated key for the same thing Please note that this is not the case
View detail
It's well made
It was longer than I thought it would be I think you should decide what you want to install and then choose a length that's close to it It's a smartphone, and the shorter ones are easier to use View detail
You might want to replace it regularly
A few years after purchasing the XGrip, when I got over the Large Gap, I was able to get it from the Holder
It had become a rare occurrence for the phone to drop out
As the surface of the rubber cap has become hard and slippery with age
I felt it, so I bought a new one to try it out
When you touch the new one, the surface is soft and chewy
Holdability seems to be obviously better than the one that has changed over time
So far, the dropout has not recurred
I was considering repurchasing the XGripBody, but it looks like I won't have to
View detail
Easy and Secure
Hold power is stronger than I thought
It's much easier to put on and off than the smartphone mount of other companies!
It's the only product that can be taken on and off in 5 seconds
Well, it's pricey because it's sold in installments with Base, Bracket and Holder! but…
I'm glad I bought this product!
View detail
Size that fits in Cowl
When I started using the RAM Mount, I chose the standard Arm, but the phone I installed it on I bought this to fit inside my Bikini cowl
It depends on how the base part is installed, but I am satisfied because it went well
The shorter the arm, the less vibration will be reduced, so if the application is suitable, the shorter arm is better Recommendation
View detail
It's a pretty big deal
As the title suggests, it's quite large
If you want the Handlebar area to be refreshed, it shouldn't be Double
I bought it because it was the only one in stock while the others were out of stock, probably due to its unpopularity
I didn't notice it at all when I bought it, but because of the length of the U-Bolt, I was able to get the Inch bar to Even after installing it, the Bolt still pops out for quite a bit of length So when I tried to put my phone down, the Arm interfered with the Bolt
I didn't have any concerns that it would come off during the ride
In terms of peace of mind, it's Recommendation because it Firmly fixes it
View detail
theft deterrence
As Ram Mount explains, I expect it to have a deterrent effect on theft
Now I just hope it doesn't break in future use
View detail
I knew it was a bad idea
I purchased this to install my phone on my car's Dashboard with Ram Mount
The result was still not sticking firmly and did not stand up to use
Modern car dashboards have an uneven surface pattern, which is a great example of the Ram Mount's Suction Cup didn't work either
After all, it seems that it must be a Suction Cup that can be gelatinized
It's not the performance of the Body itself that's bad, it's not good for use outside of the conditions that Ram Mount assumes It was, so I gave it all a three star rating
View detail