Reviews
With a sense of security.
If you are looking for a bar mount, this is it.
Bar mount at 1 inch This is a safe bet.
View detail
Robust retention and mysterious unity
[How is it used?
Quantity of about 8 years and 80,000 km (YZF-R25, 10,000 km in half a year, the rest YZF-R6):2pc. Use Set
Installation:All of them are installed by building a base on the handlebar, R25 with Nisshin Mirror Holder, R6 with CF POSH Mirror Holder (https://www.webike.net/sd/1125900/) and YAMAHAOEM Parts (https://www.webike.net/sd/1125900/) with M10Ball (https://www.webike.net/sd/1125900/) and Short arm (https://www.webike.net/sd/1125900/). R6 is equipped with CF POSH Mirror Holder (https://www.webike.net/sd/21313052/) and YAMAHAOEM Parts (https://www.webike.net/sd/25729937/) with M10Ball (https://www.webike.net/sd/24021956/) and short arm (https://www.webike.net/sd/21313052/). Short arm ()
Equipment used
Xperia 5 I don't even remember because I have no records before and I wasn't really interested in smartphones.
1. Xperia 5 (docomo) approx. 2 years
2. Galaxy S21 (docomo) about 1 year
2-1.DriveMan BS-8 (https://www.webike.net/sd/23219567/) parallel operation
3. Xperia 5 iii (simFree) about 1 year
4. Pixel 7 Pro (simFree) approx. 1 year
Was the one you received as per Image?
Simple look and somewhat rough information as per Image
Was the installation difficult?
Once the ball of the base is fixed, Arm components can be tightened and loosened without the need for tools, making them easy to use.
However, the Handlebar is used with the smartphone attached to the Quantity:Pair (for Left and Right) It is necessary to check the interference with the Screen, etc. by cutting the screen in half, so it is necessary to check after attaching it.
How was your experience with it?
Even after fixing, some Quantity:Pair (for Left and Right) There is some play in the rotation of the wheel, but it did not rotate while running and did not cause any problems in use.
Although it is not known whether the Smartphone and Camera we used have optical image stabilization, we have never experienced any problems with the Camera.
I have never had a phone fall off without the rubber claws, though. It is just meant to be a precaution.
The rubber part alone can be replaced, and the color can be selected from three colors (https://www.webike.net/sd/24186773/), so the expense is modest when deterioration is somehow a concern. Adhesive also included.
Since it is clamped by four claws, it is necessary to pay attention to the position of the Button (dedicated to Camera of Xperia or Action of iPhone 15Pro) if it is located on the edge of the Smartphone. (I mean, even the Pixel7Pro with two buttons on the Right Side sometimes pressed them.
The size of the gold part of the OEM mounting base of the Driveman BS-8 (also 10) and the gold part of the center seal of this product when the seal is peeled off are brilliantly the same, and when the gold part is disassembled with appropriate double-sided tape and transplanted and attached, it becomes a much sturdier and more robust mounting base than the BS-8's optional Handlebar Mounting. The Mount base is much sturdier and more robust than the BS-8's optional Handlebar Mounting. (It is also possible to clamp it with a nail to further increase stability.
I think I gave up on Seal because its texture is similar to that of YAMAHA's tuning fork Sticker, and it looks similar but slightly different in Largeness.
[Included Parts:were they on?
No Instruction Manual or any other instruction manuals are included in the product images.
[Was there anything that disappointed you?
Nothing special. However, I would have been sad and run to SYGN HOUSE if I didn't know that it was made in the United States and used by the military, but that it was not so particular about the appearance of the product.
Originally, we had used a holder composed only of resin from Miknowla, but the time and effort required to attach and detach the Smartphone was far less. Also, the claim that it is also used by the military made me feel more secure on my motorbike, which has a lot of vibration.
I have never encountered any image stabilization problems, and would have continued to use this product if there were not more Buttons on the Smartphone side.
View detail
It's a bit expensive
I want to mount my phone in a position where I can see it easily on my Racer9GT, so I have a FairingBracket installed.
However, the bar to mount is 12mm, which is considerably slimmer than a handlebar, so I had to use a regular mount base with a Gon Seat or something like that, but I found a product that is perfect.
It was originally designed to be attached to the bar portion of Mirror, but the size was JUST right. Spacer also comes with several sizes to fit various sizes, so it can be used for other purposes.
The Base that originally came with the RamMount was ported to the other Motorcycle, so the Arm and Body can be used.
Still, this price seems high for Base alone, but...,
View detail
tightly packed
It can be mounted most securely in any way.
Honestly, I think it's expensive, but it's a good deal because you don't have to worry about it because there are so many different types of Mounts to choose from.
View detail
For Fat bar
[How is it used?
I purchased this product to install Gopuro on my Fat bar.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Just sandwich it between Screw and Nut, but in the case of Fat bar, since it is 28.6Size, sandwich the collar that comes with it.
Both Screw and Nut are small, so be careful not to lose them.
How was your experience with it?
It is just the right Size so it fits securely.
[Included Parts:were they on?
Size adjustment collar is attached.
[Was there anything that disappointed you?
I think it would be easier to use if it were more Compact, but it is good because it is durable.
View detail
Think of it as a consumable item, maybe once a year.
The Hold feeling is excellent.
I have Rubber's Strap on just in case, but it's so good that it doesn't seem to fall off without it.
This is the third one I've bought, and within a year the plastic part in the middle comes off, it gets rickety, and one of the four holds falls apart….
Spare Parts is also available, but we end up replacing it.
The fact that it is so appealing that I keep using it because I can't find any other good product!
View detail
I am satisfied with the strength and flexibility in setting the angle, etc.
I am satisfied with the flexibility of the setting while the setting angle is important due to the special handlebar. View detail
It is sturdy. And it is flexible.
[How is it used?
I purchased this for my Lap timer installation.
Was the one you received as per Image?
This was the first time I purchased Ram Mount and it was quite robust.
How was your experience with it?
It is used in combination with Arm, but requires a fair amount of Space.
However, the ball type allows for a high degree of freedom and can be set at a certain angle, making it convenient.
The Body was made of steel or was quite heavy.
However, I have considered various types of brackets, and I think this bracket, which can be provided by ready-made products, is excellent, although a bit expensive.
Now it's like thinking about what to do about Wiring during Race.
[Points to note]
I installed it on a fat bar this time, but I couldn't get it to a good position with the M size.
View detail
for Pipe Handlebar ramMount base.
To attach spco NECTO Smartphone Holder to ramMount Base,
for Pipe Handlebar's Base.
REBEL1100 has a thick handlebar, so I bought the L size,
It was a little too Large, but with the included Tape and Adapter
It came on perfectly.
Ball headMount and ball head mount are separately used for 1 inchBall.
I put a Short arm on it and put spco NECTO's Base on it.
With ramMount's advantage of Flexibility,
It is now easier to attach a phone, even around a slightly cramped Handlebar.
ramMount is Firmly able and secure,
It is also easy to use, with a wide variety of Parts available.
View detail
Smartphone Holder Installation
I was able to easily attach my phone to this Holder without blocking the power and volume control buttons, and it holds the phone securely. The only thing that is a little disappointing is that the phone's MainCamera is located in the Center, so it blocks the MainCamera. View detail
XGrip is great, but Stem's Mount is ….
I installed it on a gsx-r125. Since the Handling Instruction Manual is all in English Version, I installed it while using GoogleLens. The Rubber of the Stem Mount turns and the Screw loosens quickly. It seems that the Stem Mount will not come off while driving.
It might be better to buy only the Stem fixing part, which belongs to the genus Gold from PLOT….
View detail
RAM Mount
Ram Mount for GSX1300R HAYABUSA.
I bought it because all my friends were wearing this.
I was worried that it would fall off, but it never fell off at all, and I have never had Camera break due to vibration.
… but my friend had a broken iPhone Camera, so I'll leave that to your personal judgment.
I am using my old iPhone XS as Navigation.
View detail
Wireless charging allows charging in the rain
[How is it used?
If your phone supports Wireless charging, you can charge it even in the rain.
Was the one you received as per Image?
Charger section is thicker and weighs 544g (figures announced on the agency's website) and somewhat heavy.
How was your experience with it?
The battery charge catches up slowly while playing NAVITIME and music.
I also like that there is an OnOff switch to prevent overcharging.
[Points to note]
Quantity the phone:When set, it is difficult to notice that the Charging Indicator is off (not charging) because the Charging Indicator is not visible unless you look into it from the side.
The USB Connector is not waterproof but comes with a Rubber cover.
[Opinions and requests to Manufacturer
Charging Indicator Lamp should be on OnOff switch.
View detail
Smartphone Fixed Band. poor quality.
This is a Single Item of Smartphone Fixing Band with RAM Mount.
I bought it because the first one I bought with Base and Mount was torn off.
Made of Elastomer, it stretches like a rubber and holds the Smartphone in place.
The band has a small tear like a slit at the edge of the band shape, perhaps due to a molding defect. When the band is pulled to secure the Smartphone, the tear is stretched and the slit gradually deepens. It is a consumable item, so this may be a device to make it wear out quickly.
If this is the case with OEM Products, I don't know if there are any, but maybe the Copy products are better.
If nothing is done, it will eventually tear off, so I heaped some Cemedine SUPERXBlack on hand in the cut for now to extend its life. Hopefully it works.
View detail
Very good
The RAM mobile phone bracket purchased by webike has a variety of accessories suitable for various ways of fixed installation. The installation is simple and you can finish it in ten minutes. The military quality is very reliable, and the disassembly is also very convenient. It is very stable after installation without shaking. View detail
strong mobile phone holder
This RAM mobile phone holder purchased by webike has a variety of accessories and is suitable for various ways of fixed installation. The installation is simple and can be done in ten minutes by yourself. The military quality is very reliable, and it is also very convenient to disassemble. After installing it, it is much more convenient to look at the navigation with the mobile phone. I have been listening to the voice navigation of the headset before, but sometimes I still go wrong. It is more convenient to use the mobile phone holder. -------------------------------------------------- -------- The RAM mobile phone bracket purchased by this Webike has a variety of accessories for fixed installation in various ways. The installation is easy to get it in ten minutes. The military quality is very reliable, and it is Also convenient to remove it. After An Shang, I took the mobile phone to see the navigation too much. I have been listening to the voice navigation of the headset before, but sometimes I still go wrong. Powered by Google Translator View detail
When in doubt, this is it.
The product is not cheap, but if you are in doubt about Mount, this is the one to buy.
It is easy to install and holds the phone securely in place. It is also very nice because there is no need to change a separate Smartphone Case for the Mount.
View detail
Smartphone cannot be fixed properly
I chose the RAM Mount because I thought it must be a good product since many people use it and a large percentage of Len BarrelMotorcycle models are equipped with it. However, the holding of the X-shaped retainer is not so good, and the Smartphone gradually gapped on a motorcycle with a lot of vibration, and before I knew it, I had to press the SIDE button. Also, when the X-shaped retainer is expanded to hold the Smartphone, it rotates by the amount of the expanded angle and cannot be fixed. It was not easy to use, so I immediately replaced it with another product. View detail
very stable phone holder
I bought this RAM MOUNT from webike. This mobile phone holder is made of military-standard material. It is sturdy and durable. There are many fixing methods to choose from. My motorcycle is HONDA REBEL500. I fixed it on the handlebar and it is very firm. , It also comes with a rubber band to better prevent the phone from falling. -------------------------------------------------- -------- The RAM Mount I bought on Webike. This mobile phone stand is a military regulatory material, which is solid and durable. There are many fixed ways to choose from. My motorcycle is Honda Rebel500. on the handlebar. It is very firm. It also comes with rubber bands to better prevent the phone from falling. Powered by Google Translator View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
It can be used normally
I installed this product when I installed the bar end mirror. It is a little rough in construction, but it is fine for use. However, there is no spanner hook to tighten the screws, so I had to apply screw lock when I installed it.
However, I have changed the Bar end mirror now, so I do not use it.
As a product, I think it is normal.
View detail