Reviews
Easy to put on and off, won't break, your phone won't fall out!
The one I own is slightly different from the current one because it is an old MODEL.
BALIUS? (Domestic 4-cylinder 250cc NAKED) It has been used for 8 years and over 100,000 km at
From this point of view, it's proven to be the best when it comes to durability.
Installation of the phone can be done in seconds due to its simple structure, but you need two hands to put it on and off. But if you can fix it in place, your phone will never fall out, whether you're driving through the woods, going full throttle on a bumpy Winding road like Irohazaka, or doing the highest speed challenge, you won't even have to worry about the Gap.
I have so far had absolutely no problems with the four rubbers on the part of the phone that grips the phone dropping out or tearing or deteriorating.
According to our friends at Forest Road Rider, the phone didn't seem to fall out when the Motorcycle made one turn sideways on the slope.
Material:There is no discoloration or cracking of the surface and no sticking to the surface, which are common in plastic products.
The product is top notch, so now it's just a matter of choosing the Clamp and which Arm to use on the body side.
View detail
After contacting the distributor
I installed it because of the high ratings on reviews here and there, but it was disappointing.
It's still a Compact, grippy and good looking Holder, but the vibration of the phone when it's running makes it feel like a Quantity:Pair (for Left and Right) to rotate and slant.
I tried it on a sample from a mass merchant to see if there was any difference in quantity:Pair (for Left and Right) It turns into a
I contacted PLOT, the distributor, and I knew that
If you don't have an object in the XGrip, it won't work, but if you have an object in the XGrip, such as a smartphone, it will not work.:Pair (for Left and Right) The answer is that it is the original product spec. that goes around to
What do you think? Do the people who are giving it high marks here and there just not care?
I've never seen a Spec. smartphone holder that rotates and tilts the phone at an angle due to vibration.
I don't think it's possible as a product.
View detail
Almost good
It usually comes with a Small Type phone as well.
Since the possibility of a fall due to vibration is not ”0”
I use it with Magic Tape.
I've got about 400k miles on it, and so far I haven't seen any rattling.
If you configure it with only RAM MOUNT, there seems to be no problem.
View detail
At first I thought it was a good idea, but then...
It may be individual difference, but the non-slip Silicon of the foundation was not covered firmly, and a part of the bottom aluminum plate was exposed.
It's not a cheap product, and that alone is uncomfortable.
Also, the manufacturer and purchaser were very unresponsive and I ended up using them as is.
On the iPhone 7, if you pinch it with the XGrip, it will interfere with the volume buttons, so the fixing position is limited.
Also a stick that's gripping even when fixed? It is quite wobbly. Even if I try various things, it does not improve.
If this is another individual, I think they sold me a defective product.
I'm disappointed in this product, as it doesn't have a bad reputation.
View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
If you want to mount a GoProMount on your vehicle, this is it.
I took advantage of the hole in the vehicle's body and installed it for the GoProMount.
You can install it in any position to enjoy powerful images easily!
View detail
Variation-rich Mount
I got a GoPro, and shooting from Angle in general wasn't enough for me, so I bought this product.
When I attached it to the Front fork, I was able to capture some powerful images that you wouldn't normally see!
View detail
Good!
It's a pretty reputable product on NetReview.
I've always been curious about this product, but had to pass on it because of the high price, but I finally installed it.
As a result, it's very easy to use, more luxurious than other Smartphone Holder, and Slim and Stylish is very good.
I think it's more like a Motorcycle Parts than a Smartphone Holder and it's integrated.
It is a product that is easy to detach and is considerably excellent in convenience.
We'll see how durable it is, but it looks pretty reliable and expected Large.
View detail
No need to worry about falling.
I'm mounting my iPhone8.
I've been using it for two years and it has never fallen off due to vibration or anything else.
That's a great Ram Mount.
View detail
Easy to put on and take off, but it stays in place
I tried other Mount products, but finally settled on this one.
It's a simple structure with an X-shaped mount that simply holds your phone in place, but it shows no signs of coming off.
The BallMount allows you to decide the angle of your phone without being limited by the position and angle of the Handlebar.
The longer the width of the phone is, the shorter the height of the Mount. Since the recent smartphones are becoming more and more Large type, please consider using a slightly larger type depending on the phone you are installing.
It is necessary to glue the 4 rubber parts with the attached instant glue. You should wear the gloves and prepare for the glue to splash around.
Also, you need to pay attention to the orientation if you are concerned about the Design, as the Rubber parts are engraved with an R-shaped Logo.
View detail
I highly recommend it.
I use it on my CBR250RR and MT09SP.
It could probably be installed in any vehicle.
As for the Holdability of the phone, I've been using it for two years and it hasn't been dropped once, so it's perfectly fine.
The retention of the arm area is also solid.
It is also convenient that you can adjust the angle by hand so that it does not get in the way when you are not using it as a mount.
View detail
Highly Universal
I bought this to connect my phone and my GoPro, it has a high degree of universalism and can be used in various situations depending on the combination.:In addition to the Set sale, I think one of the attractions of the RAM Mount is that you can buy it in Rose like this one. View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
You don't look as pretty as your picture.
When I arrived, I was surprised to see that his appearance is different from the photo. It's dirty, to say the least.
It became the appearance of the picture if it was processed by Paper processing for the first time from File hanging and polished by PIKAL.
The problem with this is that the smartphone holder cannot be tightened with a tool even though it has 10mm screw, and even if it is tightened with a finger, the smartphone holder starts to turn by vibration. It will fall off before it is stolen.
The solution is either machining it so that it can be turned with a tool or gluing it in place that won't come off forever. I'm the former.
I recommend it because it makes effective use of the Mirror Hall, which was only blocked up until now.
processing plan
? I'm going to punch a hole in it like I did.
Because the diameter of the root of the screw has become Large, shave 2 sides with File so that the Spanner may enter.
Firmly grab and turn it with ?Pliers. You need to be prepared to get a lot of scratches on the shaft.
? Solidify with high strength screw lock agent
View detail
It's secure
The Bolt With Hexagon Hole and Hexagonal Wrench are included for the U-shaped Clamp.
It is regrettable that it becomes easy to install if the Bolt is longer than 5mm.
View detail
I'm good at being tough, I guess.
The parts to be installed are very simple and just screwed together, but the workmanship is poor.
The hole for the U-shaped part was out of alignment, so I had to put a lot of force into it. The paint came off while I was screwing it in.
Well, I don't care if it's attached and peeling because that's the part you can't see.
I'm using an iPhone XS Max, which is the largest Large size phone that can be pinched with this Mount.
When you insert the XGrip into the XGrip, you need to widen the XGrip to the fullest extent and insert it at an angle, otherwise the quantity:Cannot be set.
It also interferes with the volume and power buttons, so the Quantity:It cannot be set. So you have to pull the tether (Elastic band) so hard that you can't hook it.
It's a small complaint, but once you get to see Quantity:You don't have to worry about it falling off once it's set.
The body can be easily moved in the Arm, so you can adjust the position so that the meter and the phone screen do not overlap.
I'm complaining about a lot of things, but I would like to continue to use the Point as it is.
View detail
Firmly fixable.
I was going to put a Tachometer on my ADV150, but when I found out that the OBD2 diagnostic device and the free app could display Engine RPM and other information on my phone, I thought it would be useful for navigation as well.
Fixing the phone is easy as you just pinch the two Rubbers up and down to widen the gap between them; when you release the Rubber, it Firmly locks in place and I don't think it will come off first.
I didn't understand what it is used for, but it seems to be a thing that passes the hole in the middle through the Ball of the back of the body, and hooks the four corners to the corner of the smartphone to prevent it from falling. I make a loop of fishing line by hand and hang it on the rubber to prevent it from falling.
And it also comes with instant glue, which I couldn't figure out what it's for, but it seems to be used to hold the Rubber in place as it slips off quickly.
View detail
It is sturdy and secure.
I bought it to use Quadlock with Arm.:It is described as Aluminum, but it is a bit heavy and heavy. However, it gives the impression that it is sturdy and it is safe to use it. The price is surprisingly cheap, and if it deteriorates, you can easily replace it. View detail
Very good!
I have purchased the Ram Mount before and am still using it, but I came to purchase it again to put it on another vehicle.
I bought it in bulk because I wanted to make the arm part shorter.
I didn't feel like my smartphone was going to fall off when I was cruising at high speeds, and I'm comfortable using it.
View detail
I definitely recommend it.
I've been using it for some time now.
I feel very secure and easy to use even though I can easily put my phone on, and I recommend it to my family and friends.
View detail
stability
It's pricey because you can combine several, but it's better to start with this than to buy several and fail.
The Hold feeling is fine, and if you're worried about it, you can definitely stop it with Elastic Band!
View detail
7.This is the only option for 0Inchfa Brett!
The one I am using for Navigation for my motorcycle is HUAWEI MediaPad T2 7.0 Pro, which is a 7.0inch model, and most of the mount for my phone does not fit the size. It was not possible to use the RAM Mount, and there was only this RAM Mount that can be selected. But the price is higher than the other ones and there was a review that the Brett which exceeds 110mm was not able to be installed in the review of Amazon, so I was hesitant, but it was able to put on MediaPad T2 7.0 Pro safely with Silicon Cover attached. There is still a little room for more size, but there is no need to use the tether as it mounts firmly with the XGrip and does not fall off. Also, the XGrip allows you to change the position of the mount, which is a big advantage over the usual four-cornered type mounts, which can block the charging port. The problem is that the price becomes a little high because it is necessary to complete the RAM Mount set, but when mounting a digital camera, because the part of Clamp and Arm can be diverted, it is the product that can be recommended on the whole. View detail