Reviews
It may not look like it, but it can be fixed Firmly.
I can't get a SMART holder on my phone because it's a waterproof, heavy duty Torque model.
I tried many things and this was my choice.
I was worried because I only pinch it, but the grip force of Rubber is strong and there is no problem without Gap.
He's hooked up to Strap, though.
View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
I need to be able to hang tools.
It is convenient because the Mount base for RAM can be added to the Screw hole of M10.
You can't hang a tool on it so you need to grab it with ArmParts and tighten it.
I've never had it come loose while driving by just grabbing it with the Arm and turning it.
It's not Firmly tightened, so I hope they improve it.
View detail
Inspection results show that the product is good.
It rotates when I mount Smartphone though there was it in Review of other people when I actually used it. It occurred even in the situation that it did not start yet immediately after installation. There was no such phenomenon when I checked the actual product at the motorcycle goods store nearby. Therefore, I asked them to inspect it. However, the result of the inspection was that it was a good product. In the end, I was told that my combination was bad. All of the parts are from the same manufacturer and the tightness of the arm is subjective, but I think it is Level without a problem. This product was originally designed to hold a smartphone in place, but it doesn't fulfill that function, yet the seller insists it is a good product. I bought this product because of its high rating, but if you see this review, I suggest you don't buy it. View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
Mirror hall.
If you use Mirror's hole or an empty Screw hole, it's not usually noticeable.
The Spanner groove is also left uncut and round, so you may need to be a little creative to install it.
And the build is rough.
View detail
Simple and robust
Simple and good.
Durability is also not a problem.
But the construction is rough because it is Made in USA.
Easily removable spec. and expandable with a variety of parts.
The mounting pattern is infinite.
View detail
Smartphone Holder for Scooter
I'm buying RoseRose, so Quantity:It is an impression in Set.
At family reQuest, I decided to install a Smartphone Holder on VESPA Prima Vela 150.
I bought a Base, a Short arm (I thought it would be a hindrance if it was a long arm on the Mirror mount) and a Smartphone Holder from RoseRose.:There was no Set sale.
RAM-HOL-UN7BU with tether for XGrip Smartphone
・RAM-B-201U-A Short arm
・RAM-B-252U MirrorFrame base 11mmBoltfor Hole
Fast, I ordered at midnight, but it was in stock and I got it the next day.
Now for the installation:。。。。
Oh, Mirror's slot is retracted, and friend tightening is not possible. ・・・・Mirror Bracket diameter was only checked on the Net, and it was a mistake to buy it on a hunch.
Then, I change my mind and decide to buy Base to be attached to Mirror Bracket. On the spot, I bought Petit. This time, for the sake of caution, I measured Mirror Bracket diameter with Caliper and chose Base which can be attached to Beauty eye.
RAM-B-408-37-62U Bar Mount base bar
I knew it was in stock and it arrived the next day. It's a good thing that it's the holidays.
Now, since four kinds of Spacers are included according to the diameter, I chose the Spacer which fits the most after wrapping the included Rubber. This Base has a Hexagonal Wrench in it, so you don't need to do anything. (I think that I usually have it, so I don't need it. (I don't need it because I think I usually have it.
Tighten the screw and put it in a good place where Arm can be attached, and Base is over.
It's very sturdy, even though it looks unreliable at first glance. If the rubber of the part to tighten the phone deteriorates, it may become slippery, but since it is new, it does not slip at all.
By the way. "Bar Mount base bar. There was a Parts Structure diagram and a brief explanation, but nothing else. The Holder had a Rubber on it and I thought it must be used like this. The Mount base bar had a Rubber on it so that the One Side could be glued on. I was sure that I would have to wrap it first so that it would not move. It's easy to install, but I'm imagining it. I'm sure it's right.
Well, let's install USB power supply next.
View detail
Smartphone Holder for Scooter
I'm buying RoseRose, so Quantity:It is an impression in Set.
At family reQuest, I decided to install a Smartphone Holder on VESPA Prima Vela 150.
I bought a Base, a Short arm (I thought it would be a hindrance if it was a long arm on the Mirror mount) and a SmartphoneHolder from RoseRose.:There was no Set sale.
RAM-HOL-UN7BU with tether for XGrip Smartphone
・RAM-B-201U-A Short arm
・RAM-B-252U MirrorFrame base 11mmBoltfor Hole
Fast, I ordered at midnight, but it was in stock and I got it the next day.
Now for the installation:。。。。
Oh, Mirror's slot is retracted, and friend tightening is not possible. ・・・・Mirror Bracket diameter was only checked on the Net, and it was a mistake to buy it on a hunch.
Then, I change my mind and decide to buy Base to be attached to Mirror Bracket. On the spot, I bought Petit. This time, for the sake of caution, I measured Mirror Bracket diameter with Caliper and chose Base which can be attached to Beauty eye.
RAM-B-408-37-62U Bar Mount base bar
I knew it was in stock and it arrived the next day. It's a good thing that it's the holidays.
Now, since four kinds of Spacers are included according to the diameter, I chose the Spacer which fits the most after wrapping the included Rubber. This Base has a Hexagonal Wrench in it, so you don't need to do anything. (I think that I usually have it, so I don't need it. (I don't need it because I think I usually have it.
Tighten the screw and put it in a good place where Arm can be attached, and Base is over.
It's very sturdy, even though it looks unreliable at first glance. If the rubber of the part to tighten the phone deteriorates, it may become slippery, but since it is new, it does not slip at all.
By the way. "Bar Mount base bar. There was a Parts Structure diagram and a brief explanation, but nothing else. The Holder had a Rubber on it and I thought it must be used like this. The Mount base bar had a Rubber on it so that the One Side could be glued on. I was sure that I would have to wrap it first so that it would not move. It's easy to install, but I'm imagining it. I'm sure it's right.
Well, let's install USB power supply next.
View detail
Sturdy phone holder
My motorcycle is HONDA CM500. I bought this RAM MOUNT mobile phone holder on webike. The bracket material is made of military grade material. It is easy to install, very firm, without abnormal noise, and the workmanship is not as rough as expected. The 12pro max shell is thin. Just installed, I received it within five days of shipment -------------------------------------- -------- My motorbike is a HONDA CM500 and I purchased this RAM MOUNT on webike. It is made of military grade material, easy to install and very solid too, no rattles. The quality is also not as rough as I thought it would be. It fits my 12pro max just right. Shipping was fast and I received it in 5 days Powered by Google Translator View detail
The best phone holder
RAM is a very good phone holder. I have considered other brands before, but friends who play motorcycles around me have repeatedly recommended this brand to me. Although the price is very expensive, but bite the teeth or buy it. It's very good, it's very easy to use, and it's very firm. It is worthy of being a military-grade material. Various accessories can be suitable for all kinds of handlebars. The rubber pad is also thoughtfully presented so that it will not scratch the handlebar when installed. ---------------------------------------------- RAM is a very good phone holder. I considered other brands before, but my friends who play motorcycles around me recommended this brand over and over again. It was expensive but I bought it anyway. Very good, very light to use, and the grip is very firm. Worthy of the military-grade material, a variety of accessories can be suitable for a variety of handlebars, but also thoughtful gift of rubber pads will not scratch the handlebars when installed. Translated with www.DeepL.com/Translator (free version) Powered by Google Translator View detail
Recommendations for smartphones without Autofocus
It's very chunky.
In terms of Largeness, I think most smartphones these days are Target.
The design is a bit old and doesn't work on impact, but that's why it reaches Direct to the phone.
Camera with Autofocus will be affected, so OffLineMap of GoogleNavigation is Recommendation for cheap models.
View detail
RAM MOUNT mobile phone holder
The RAM mobile phone holder is easy to install, and it takes ten minutes to get it done by yourself. It is very firm and easy to disassemble. After installation, it is much more convenient to take the mobile phone to watch the navigation, and you will not go the wrong way, and the phone will not be missed. I used to listen to the voice navigation of the headset, but sometimes I still go wrong. Now it is more convenient to listen and watch. There is no one necessary for riding. ---------------------------------------------- The RAM mobile phone holder is easy to install. It takes ten minutes to get it done by yourself. I tried the effect during riding. It is very firm and easy to disassemble. After installation, it is much more convenient to take the mobile phone to watch the navigation , and you will not go the wrong way, and the phone will not be missed. I used to listen to the voice navigation of the headset, but sometimes I still go wrong. Now it is more convenient to listen and watch. There is no one necessary for riding. Powered by Google Translator View detail
Bought to fix to the M6 screw part of the car body.
As shown in the picture, we processed M6 Nut to Crown Nut of Top Bridge and installed this product.
CrownNut has some M6 parts, but most of them are Material:Since it is an aluminum product, I processed OEM CrownNut because I was worried about its strength.
This product is the best choice for this kind of processing method.
The video shows the touring scenery and the smartphone is fixed firmly.
View detail
If you extend the Arm, it will shake, so the standard is fine.
Top Bridge CrownNut with M6 Nut and no BallMount Base URL → https://www.webike.net/sd/24021945/It is installed with this product.
There is no particular inconvenience, but I feel that the rubber of the ball part of this product is insufficient in strength.
We are repairing the Ball part by pouring instant glue because it was torn.
The video is a running scene taken with this Mount facing forward.
View detail
There's a reason it's so popular.
I installed it on 2020 YZF-R1.
warp and woof
Maybe the number one reason is because it had a good reputation and caught my eye.
In fact, there are no flaws.
good point
Easy to install your phone, just pinch it.
But with the Ram Mount, it's just a matter of putting your phone in between, so you can get on and off quickly.
If you're a Motorcycle rider, you'll know how much this ease and SMARTness is worth.
There are many types of Arm and Base, such as Handlebar Clamp type, Clip type, Bolt co-fastening type, etc., and each parts are connected by ball joint. Since each parts are connected by ball joint, you can freely position the angle and height.
These are the reasons why you can't do that! It's hard to have complaints like "I wish it was a little more like this", and it can be installed in the ideal installation position that you thought of, and you can remove your phone with ease, it's really a seamless product.
A bad point
Well, I guess this is what everyone is thinking.
High. Yeah.
But it's worth buying. You should try it.
Caution
The one I bought was Handlebar Clamp type, but I thought a lot and changed it to Bolt co-clamp type only for Base.
I've written a separate article about it, so if you'd like to check that out as well.
You can change the installation method freely by replacing only Base and Arm.
View detail
I could have used a large phone.
[How is it used?
Touring
Was the one you received as per Image?
Rakuten BIG is available in Large size.
How was your experience with it?
It's quite stable.
[Points to note]
nothing special
How did it compare to other products?
A large phone can be attached.
Looks cool.
View detail
Cospar good
I usually use a SYGN HOUSE Smartphone Holder, but when I added a sub-Motorcycle, I decided I didn't need an expensive one!
The texture was good when I thought about the price, and the freedom width of the installation angle was good and easy to handle a lot. However, I touched VolumeButton of iPhone according to the installation position though I heard it from other friends, and there was a thing that I pushed Button by a step and a shock, and the volume suddenly became Small occasionally! 。
I had heard that the part of Rubber that fixes a smartphone may deteriorate and not fall while running, but it has not happened at the present stage when three months have passed.
View detail
Big change!
It is easy to install on the bar and does not wobble.
Since various things can be attached from the ball joint, it seems that various possibilities can be expanded from here.
View detail
Not that you need it as a spare, but if it runs out, replace it.
I bought a set of Ram Mounts in August of 2019, and for a while I didn't use this Elastic band, but after an incident where my phone popped out on a large step and hung on the charging Cable, I made sure to put it on properly when using it.
Of the four corners of the phone, I used only two corners of the diagonal, but this may stay in the four corners without Case because there was Ring to put the finger in Case (iPhone8) of the phone. (Probably impossible)
There was no problem at all to keep it fastened with 2 corners, but I feel that it is difficult to fasten because Rubber is hard (not much elasticity), although it may be because Ring is on the back of Smartphone Case.
Because of the lack of elasticity, it was hard to tell how much the Rubber had deteriorated, and it suddenly broke like a tear.
View detail
Rider's wear rate is high.
I was unsure about buying my first smartphone holder, but the Rider around me had a pretty high probability of using it, so I talked to them about it and bought it afterwards.
The motorcycle I installed is a Z900RS, but it was helpful to have the mounting bracket included for the OEM Taper Handlebar.
Also, both the Handlebar side and the Smartphone Holder side have a ball joint-like root of the Arm, so there was quite a lot of angular flexibility.
The only thing that troubled me was that the Nut size of the Bracket that fixes to the Handlebar was 11mm.
I was installing it in a rundown. 'Not 10mm? And then I borrowed an 11mm Wrench from a friend.
As many Riders use it, it feels fine and I don't feel worried about my phone falling out.
View detail
He gets the details right.
This is the only one I decided on after much deliberation and a thorough look at WebikeMagazine and other publications.
The latest version of the 2020 edition of the article can be found here.
[https://www.webike.net/magazine/must-buy/must-buy-electronic_parts/47524]
When I was using Anroid, there was no problem, but as soon as I changed to iPhone, I was caught in the trap of the pincer type that says the volume button is pressed and held down.
However, however, I can still use it comfortably today without being pressed for too long by adding a smartphone cover.
After a year of purchase, unfortunately, a piece of the locking rubber (the one that stretches and vetches, not the one that pinches) has torn off, but it works fine with all four sides working.
I think I got a good purchase with no weird leaning, dislodging, or turning away while driving.
View detail