Reviews
Good camera mount, high quality that lasts!
The RAM Mounts designed for the GoPro do not come with the GoPro thumbscrew or the stainless acorn nut as depicted in the photographs. Instead, they ship the GoPro adapter with a nylock nut, a tiny machine screw, and a washer expecting this to be used in lieu of the GoPro thumbscrew. One can easily re-use their thumbscrew, but the Acorn nuts have to be swapped over from leftover GoPro mounts or purchased, but they are not retained in the RAM GoPro adapters! This allows the nuts to be easily lost. The rubber balls on the RAM mounts combined with the stout center assembly are the biggest selling points of the RAM mounts. It puts the other brands to shame! However, I am not a big fan of the sheet metal screws used to attach the ball assembly to the base. I could understand if it was lean manufacturing to reduce the number of specialized adapters, but almost all of the RAM mounts use the ball assembly. It would have been more secure and practical to produce an integrated ball assembly for each of the bases. That way I could still swap between mounts but bypass the need for the 2 sheet metal screws that could strip out the plastic or fail over time. I would have liked to see the ball assembly integrated into the suction cup mount. I also would have liked to see the thumbscrew included, or at least provide an acorn nut or nylock nut that is retained in the plastic GoPro adapter. This way the end user can simply reuse the GoPro thumbscrew without digging around for extra nuts. The machine screw included with the RAM mount is a smaller diameter that isn't as secure as the GoPro screw, and as a result the included nylock nut (which is too small to retain in the housing anyhow) has a smaller thread diameter that does not allow the use of the GoPro thumbscrew. It's almost as if RAM designed the GoPro adapters as a secondary after thought. I do like the twist lock suction cup mount. It provides a sturdy camera mount on glass or smooth surfaces, and the double socket arm is very secure and adjustable. Overall: 4/5 stars. I don't like how RAM included the GoPro adapter without proper hardware. The use of sheet metal screws to secure the ball assembly to the base is also cheaply done. It should have been integrated from the get-go and still allow for lean manufacturing principles. Otherwise it is a very solid mount. View detail
stable and without shaking
I put RAM MOUNT Gopro ball mount 1" and RAM Mount short arm palstic in the DJI action camera and installed it on my Ducati StreetFighter 1098. During driving the RAM MOUNT is very stable and without shaking. View detail
Think of it as a consumable item, maybe once a year.
The Hold feeling is excellent.
I have Rubber's Strap on just in case, but it's so good that it doesn't seem to fall off without it.
This is the third one I've bought, and within a year the plastic part in the middle comes off, it gets rickety, and one of the four holds falls apart….
Spare Parts is also available, but we end up replacing it.
The fact that it is so appealing that I keep using it because I can't find any other good product!
View detail
Ram Mount Ta Bagーs
Purchased to fix Smartphone Holder on Separate handle
I found it very easy to use because it can be fixed anywhere with Pipe!
It can also be used to fix the Camera to the Mirror, making it highly universal.
View detail
I am satisfied with the strength and flexibility in setting the angle, etc.
I am satisfied with the flexibility of the setting while the setting angle is important due to the special handlebar. View detail
It is sturdy. And it is flexible.
[How is it used?
I purchased this for my Lap timer installation.
Was the one you received as per Image?
This was the first time I purchased Ram Mount and it was quite robust.
How was your experience with it?
It is used in combination with Arm, but requires a fair amount of Space.
However, the ball type allows for a high degree of freedom and can be set at a certain angle, making it convenient.
The Body was made of steel or was quite heavy.
However, I have considered various types of brackets, and I think this bracket, which can be provided by ready-made products, is excellent, although a bit expensive.
Now it's like thinking about what to do about Wiring during Race.
[Points to note]
I installed it on a fat bar this time, but I couldn't get it to a good position with the M size.
View detail
for Pipe Handlebar ramMount base.
To attach spco NECTO Smartphone Holder to ramMount Base,
for Pipe Handlebar's Base.
REBEL1100 has a thick handlebar, so I bought the L size,
It was a little too Large, but with the included Tape and Adapter
It came on perfectly.
Ball headMount and ball head mount are separately used for 1 inchBall.
I put a Short arm on it and put spco NECTO's Base on it.
With ramMount's advantage of Flexibility,
It is now easier to attach a phone, even around a slightly cramped Handlebar.
ramMount is Firmly able and secure,
It is also easy to use, with a wide variety of Parts available.
View detail
Smartphone Holder Installation
I was able to easily attach my phone to this Holder without blocking the power and volume control buttons, and it holds the phone securely. The only thing that is a little disappointing is that the phone's MainCamera is located in the Center, so it blocks the MainCamera. View detail
XGrip is great, but Stem's Mount is ….
I installed it on a gsx-r125. Since the Handling Instruction Manual is all in English Version, I installed it while using GoogleLens. The Rubber of the Stem Mount turns and the Screw loosens quickly. It seems that the Stem Mount will not come off while driving.
It might be better to buy only the Stem fixing part, which belongs to the genus Gold from PLOT….
View detail
I used TaBrettHolder in my car.
It is easy to install and easy to remove. I drove 300 km with the MINI TABrett Holder next to the glass in my car and it did not fall off nor did the Holder drop. I think the adsorption is strong. However, I purchased it for a vehicle, so I do not know what will happen if I install it on a Motorcycle cowletc.:Since it is Plastic, I removed it when I got home because I think it will deteriorate if it continues to be exposed to sunlight. View detail
RAM Mount
Ram Mount for GSX1300R HAYABUSA.
I bought it because all my friends were wearing this.
I was worried that it would fall off, but it never fell off at all, and I have never had Camera break due to vibration.
… but my friend had a broken iPhone Camera, so I'll leave that to your personal judgment.
I am using my old iPhone XS as Navigation.
View detail
RAM Mount U-shaped Clamp
For now, I am using it for both GSX1300R HAYABUSA and GSX1300R HAYABUSA.
I will buy another one for CT110 HUNTER CUB later, but I also bought it for CT110 HUNTER CUB because I was worried that I would not be able to use it without Navigation.
The angle of the clamp is not that much of a concern, but I appreciate that I can install it without worrying about the angle, and since it is easy to remove except for the clamp, there are no problems other than a little bit of hassle for now as a dual use.
Even with vibration, I still haven't broken the Camera on my iPhone XS for Navigation.
View detail
Short is the best.
I purchased the Short Type because the standard was too long and difficult to handle. I like the quality and feel of the product. View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Purchased as Base for Smartphone Holder
I purchased two of these as a base for my Smartphone Holder, Gopro, and MINI TaBrett. They are easy to install, but you will need a Hexagonal Wrench, which is not included in the package. The only drawback is that the shortest bolt is too long, and the material of the bolt is not indicated. View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Discreet and easy to remove and install RAM Holder
Yamaha Bolt R-Spec, this mount is attached to the position above the Handlebar ClampLeft with the supplied M8.
RAM Holder can be easily detached and attached.
Quantity Holder a little outwardly.:If set, it will not interfere with the Meter.
Where the limited space of the Handlebar does not have to be sacrificed for Mount,
Also, when the Holder is removed, this Mount should be unobtrusive.
Quantity the phone:It is useful when I ride with Set.
I used the same RAMBase on another motorcycle for about 3 years and got a small crack on the round-headed rubber.
I guess it depends on the frequency of use and the environment in which the Motorcycle is stored, but at this price, it makes sense.
View detail
Wireless charging allows charging in the rain
[How is it used?
If your phone supports Wireless charging, you can charge it even in the rain.
Was the one you received as per Image?
Charger section is thicker and weighs 544g (figures announced on the agency's website) and somewhat heavy.
How was your experience with it?
The battery charge catches up slowly while playing NAVITIME and music.
I also like that there is an OnOff switch to prevent overcharging.
[Points to note]
Quantity the phone:When set, it is difficult to notice that the Charging Indicator is off (not charging) because the Charging Indicator is not visible unless you look into it from the side.
The USB Connector is not waterproof but comes with a Rubber cover.
[Opinions and requests to Manufacturer
Charging Indicator Lamp should be on OnOff switch.
View detail
Smartphone Fixed Band. poor quality.
This is a Single Item of Smartphone Fixing Band with RAM Mount.
I bought it because the first one I bought with Base and Mount was torn off.
Made of Elastomer, it stretches like a rubber and holds the Smartphone in place.
The band has a small tear like a slit at the edge of the band shape, perhaps due to a molding defect. When the band is pulled to secure the Smartphone, the tear is stretched and the slit gradually deepens. It is a consumable item, so this may be a device to make it wear out quickly.
If this is the case with OEM Products, I don't know if there are any, but maybe the Copy products are better.
If nothing is done, it will eventually tear off, so I heaped some Cemedine SUPERXBlack on hand in the cut for now to extend its life. Hopefully it works.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Ideal for mounting Pipe Handlebar
If you are installing a RAM Mount on a Pipe Handlebar body, this M8BaseBolt is the perfect replacement for the Handlebar Clamp Bolt.
There is no need to worry about mounting gapping due to vibration. The M8BaseBolt can be mounted on a handlebar clamp, so there is no need to worry about space limitations.
View detail
Adapter with RamMount1 inchBall
Installed by drilling holes in Upper Cowl Bracket and using Ram Mount
I don't think it is suitable for people who find it a little difficult because of the drilling process required, or for those who are not comfortable with drilling holes in Motorcycle.
Bolt can be fixed, so it can be fixed firmly.
View detail
Arm for Ram Mount1 inchBall
I bought it, but it was a little too long, so I bought the short version as well.
Standard Arm is unexpectedly long and bounces around too much when fixed to Handlebar
The thing itself was very well made.
But it didn't suit my use.
View detail