Reviews
It can not be fixed with the installation according to the Instruction Manual
In the accompanying Instruction Manual, the Equipment Rubber plug (Conical Rubber) Insert it into the Stem, mark it in the protruding part, and 1 inch towards the direction where the tip becomes narrower from there (About 25mm) Marked the part and marked it cut in two places - - - There is, but it can not fix well with that.
When inserting into the Stem, cut the part about 10 mm further downward from the upper part, 1 inch towards the direction where the tip is getting thinner (About 25mm) Cut the part of. If you insert it in the assembled state, it will completely enter inside as soon as you plug it into the Stem. This is a miso.
Also, use Washer and Nut anchor Attachment to choose One size Small thing from Limit entering Stem. Nut that is in Set is also Nut with locking prevention, but I use normal Nut. Even if you tighten it with a loose stopper it will rotate together.
Also, when installing, it is hang to inflate the Rubber to the very last minute not to get into the Stem if you do not do your best by tightening Bolt. If you tighten in this state, you can not fix it completely to Firmly, but you can fix it quite steadily.
View detail
Good texture, easy to use, easy to fine-tune
I thought that it would be more convenient to have a smartphone in a touring, and various colors. And this is what I got. Usability was good as expected, but it is slightly unexpected that the X grip position fixing the smartphone slightly interferes with the charging terminal of the smartphone.. Basically, I use navigation while feeding. I wish I could shift the smartphone either up or down, but I wonder a bit of being unable to grip the center of the smartphone.. It seems there is no problem with an iPhone, it interferes with my docomo 's smartphone ... So I'm talking about buying anything other than X grips. But, I am satisfied with the easiness of attaching and removing a smartphone, holding power, so four stars. View detail
For ipad mini 4 Navigation
I use it to fix ipad mini 4.
Since this product Single Body is weak in fixation, it can be fixed firmly by using it together with X-Grip holder UN 8.
Ipad mini 4 can be used even in the rainy season by using Case cover of Life proof sold separately.
View detail
Convenient.
When using a smartphone that is no longer used as a doreco, I bought it because it does not face the front of the car body.
Although it is possible to rotate 360 ??° at the Center part, if you try to tighten the Screw, it seems that the part to be fixed is determined, so it may not be fixed in the place you like. Still, I could bring a smartphone to my favorite place with a fine adjustment with Ball joint on Base side and Ball joint on Holder side.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
It was easy to work as expected!
Because SYGN HOUSE 's BallSize was SI and RAM was ft - lb, I was worried about how it would be costing me, but I found this, cut it and cut it out!
It worked okay ~ (^^)
I was able to do what I wanted ~
View detail
theft / To prevent mischief
It is transfer from ArmlockRAM-KNOB 3 LU.
Compared to RAM-KNOB 3 LU, it looks a little SMART.
There is no BALI, but it is a good or bad "RAM Mount" build.
There is no problem in function.
View detail
I think it's good.
StemHolder for in-vehicle video
RAM Mount so do not hesitate
I tried purchasing this.
Hold is also solid
I think Smooth is good for removal
is.
Stem and Jointetc. Owning
Because it was, it cheaply got up
When it comes to arranging all from 1, it is
It may be expensive - -
View detail
Was it too tight?
To install an iPhone
I thought of any chance and bought it.
Honestly I do not feel like falling down without it,
It will be safe for minds such as high speed.
However, feeling too tight
You.
I think that it is okay even if it is loose a little..
View detail
I use it conveniently for the price
Among highly scalable products, I think that it will become cheaper one.
As in the notice of goods, as a finish feeling
It's not really nice, but there is no problem with regard to mounting accuracy.
Mainly uses Iphone 6 with Cover.
There is nothing like falling.
View detail
People who are using Navigation as a smartphone are sure to come!
It is enough to fix this product to Motorcycle and use the smartphone as Navigation.
A Rubber like a string on a Right of a product introduction photo is a Point, it rotates slightly when fixing a smartphone, but if you attach a Rubber and fix a smartphone it will not move.
Depending on Motorcycle, MT-07 has vibrations when doodo doodo accelerates at 2000 to 3000 rpm, and the fixed smartphone vibrates in burst.
By the way, the used smartphone is ASUS ZenFone Selfie.
Large It is durable even for a smart smartphone..
The only thing you want to be aware of when installing is Nut's Size is 11.
And if it is Spanner it is difficult to tighten. I think that it can not be tightened with Glasses. Socket is also not allowed (However, it is possible with thin meat Socket).
View detail
Short is useful
Ram Mount MirrorFrame base Used in combination with 11 mm hole RAM-B-252U
One size long amplifies the vibration of Motorcycle and it is unsuitable for me who fixes ActionCam.
I chose Short to minimize vibration.
Still it will be the video that picked up the vibration, but it is acceptable range.
People who want to finish with a low budget will have no choice other than this.
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
Required for ActionCam Items
There is no space around MT-07 Handlebar.
It is this product to appear there.
It fixes in a form to let it pass through the Bolt part of Mirror.
Well, not only Mirror but also other places.
I am using it to fix ActionCam
View detail
Purchased because I wanted to attach to Front fork
Since the space between Front fork and Cowl with Meter is wide, I fixed it under the top bridge of Fork and installed it in HandlebarCenter with key lifted. The smart fixation place is also easy to see and it is totally inconspicuous when only using Clamp when not using it. View detail
Ram Mount X-Grip holder
It is a purchase on consent as I was checking your impressions
About 1 centimeter from the structure after mounting the smartphone Quantity : Pair (for Left and Right) I do not fall off, but I think that those who are interested after checking other products
View detail
Screw attached is more user-friendly if you install GoproOEM's
The product here is made in United States and the construction is solid, but the details such as painting are bad (There is no problem in use) So it is not suitable for nervous people.
I purchased this item for the third time because it is troublesome to replace every Housing in Gopro.
Since the supplied tightening Screw is only an ordinary screw, I think that it is more user-friendly to install GoproOEM or similar screws for tightening screw Parts.
View detail
7InchTab turns diagonally while running.
It can be said to be exclusive for iPad mini, in the pinched part
In the 7 Inch Tab which can afford a margin, while driving
Quantity : Pair (for Left and Right) It will be Gap this much.
The plastic part of the pinched part breaks in the screw Brett Holders,
There is no decision strike ...
View detail
Lifespan is one year !!
Mount itself is robust, but it sandwiches Ta Brett
A crack gradually enters the pla part, and within a year
To crack.
Even if you exchange parts, the delivery date is undecided and includes shipping fee 2000 yen or more,
Therefore it is more realistic to replace Body.
Stickiness to resin is insufficient. If it is JAPAN this is not the case.
View detail
More than appearance
* Product description is written as Length about 8 cm, but in fact 9. 5cm is.
It is Arm of Size which is optimal for use as a smart Holder or Navigation Holder.
Even for Camera shooting, if you have one with this, 5-inchesArm, Ball joint and CameraHolder, you can cope with various shooting.
It is possible to say that it is general in lamb Mount, although there are uneven paint, scratches, fine making is sloppy, performance as a mount tool - If it sees only the function it is close to 100 points perfect score. It's very good.
View detail
FirmlyHold
I am using it for Handlebar of CB 400 SB. (Using Spacer)
Nut for fixing is probably Inch size, so ginger can be substituted with 11 mm Spanner.
Please note that at this time, be sure to prepare Spanner.
Nut and Rubber's Ball part are too close, so you can not enter Socket or Double-end Wrench.
Installation is completed if you tighten it strongly to the extent that it is not tame.
Ram Mount is very affordable and very strongly fixed to me.
Moreover, if you change the tip Parts, you can use it for various purposes such as smart Holder, NavigationHolder, CameraHolder.
It is a mount tool of Recommendation.
View detail
For in-vehicle Camera shooting
I am using the ActionCamera named GC - XA 2 of JVC to shoot in - vehicle movies.
There is also CameraHolder without Plate, but when setting Camera, I purchased with Plate because the inclination is easy to understand.
In the case of GC-XA 2, even if Screw is inserted deeply, since a gap is formed with Plate, we use 5 mm Sponge in between.
Several holes are open in Plate, so it seems to be useful when working on something.
View detail