Reviews
It's a bit expensive
I want to mount my phone in a position where I can see it easily on my Racer9GT, so I have a FairingBracket installed.
However, the bar to mount is 12mm, which is considerably slimmer than a handlebar, so I had to use a regular mount base with a Gon Seat or something like that, but I found a product that is perfect.
It was originally designed to be attached to the bar portion of Mirror, but the size was JUST right. Spacer also comes with several sizes to fit various sizes, so it can be used for other purposes.
The Base that originally came with the RamMount was ported to the other Motorcycle, so the Arm and Body can be used.
Still, this price seems high for Base alone, but...,
View detail
for Pipe Handlebar ramMount base.
To attach spco NECTO Smartphone Holder to ramMount Base,
for Pipe Handlebar's Base.
REBEL1100 has a thick handlebar, so I bought the L size,
It was a little too Large, but with the included Tape and Adapter
It came on perfectly.
Ball headMount and ball head mount are separately used for 1 inchBall.
I put a Short arm on it and put spco NECTO's Base on it.
With ramMount's advantage of Flexibility,
It is now easier to attach a phone, even around a slightly cramped Handlebar.
ramMount is Firmly able and secure,
It is also easy to use, with a wide variety of Parts available.
View detail
Smartphone Fixed Band. poor quality.
This is a Single Item of Smartphone Fixing Band with RAM Mount.
I bought it because the first one I bought with Base and Mount was torn off.
Made of Elastomer, it stretches like a rubber and holds the Smartphone in place.
The band has a small tear like a slit at the edge of the band shape, perhaps due to a molding defect. When the band is pulled to secure the Smartphone, the tear is stretched and the slit gradually deepens. It is a consumable item, so this may be a device to make it wear out quickly.
If this is the case with OEM Products, I don't know if there are any, but maybe the Copy products are better.
If nothing is done, it will eventually tear off, so I heaped some Cemedine SUPERXBlack on hand in the cut for now to extend its life. Hopefully it works.
View detail
Arm for Ram Mount1 inchBall
I bought it, but it was a little too long, so I bought the short version as well.
Standard Arm is unexpectedly long and bounces around too much when fixed to Handlebar
The thing itself was very well made.
But it didn't suit my use.
View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
It can be used normally
I installed this product when I installed the bar end mirror. It is a little rough in construction, but it is fine for use. However, there is no spanner hook to tighten the screws, so I had to apply screw lock when I installed it.
However, I have changed the Bar end mirror now, so I do not use it.
As a product, I think it is normal.
View detail
quite messy
Used on 10R, glad to be able to use it since the car model has few options for mount position.
With 10R, short arm could not be used due to interference, standard or long arm is better.
Some reviewers say that the bolt does not fit, but the M6 bolt is included, but in my case, the length did not fit.
The bottom of the Screw hole is reached, so the short Bolt owned by the company is used instead.
I didn't use it, but the color that comes with it is Material:Plastic and concerned about durability.
The finish is quite dirty, as is the case throughout the Ram MountSeries.
The right-angle, square structure makes it unattractive and bulky.
View detail
A must for RAM Mount installation
The quality seems to be not so good since BALI is still present on the ball portion, but the installation itself was not a problem.
I have it mounted on a ZETA Handlebar and there is no wobble at all.
View detail
Is there a mistake?
I couldn't believe my eyes at the difference between the statement and the merchandise.
What's his mistake?" I feel a little lost.
View detail
For Large-eyed Smartphones
Purchased for spare parts.
I'm currently using one for a phone up to about 5-inches, but I've switched to a larger phone, so I'll replace it when it runs out.
I've applied a MAJOR amount to the image so you can see how large it is, if you want to check it out.
View detail
It cannot be fixed firmly at the place where you want to fix it.
I tried to hold my phone in place, but the vibration of the motorcycle and other factors caused the Quantity:Pair (for Left and Right) It will be off by a few inches.
It was not a defect when I confirmed it by the inquiry etc., and it was said that it was originally made like that.
So even if you fix your phone in a straight line, it will be at a slight angle when you are running.
If you're nervous, don't do this.
In addition, if you are not careful when inserting your phone, such as the iPhone, the XGrip will interfere with the VolumeButton and the volume will drop, so you need to be careful, although it depends on the model you install.
View detail
Well, it shakes a lot. It might be Anti-vibration in a sense.
The price is cheap. Anyway.
It's a bit unstable, and the Image that plugs the Rubber plug into the Stem is quite shaky.
And since it's a tapered rubber plug, I think it might come loose from vibration. I've never had it come loose, but I do hit it with a hammer or something on a regular basis.
I didn't have a choice because I like Rum Mount, but I thought it could be a little more manageable.
However, considering the fact that the vibration of the Motorcycle will break your phone, this product will definitely absorb the vibration.
Perhaps this is better for you.
I think I'll keep using it for now.
View detail
If you don't mind the details.
First of all, the paint was peeling when the product arrived, which was sad, but once it was installed it was fine. As others have said, it will turn, but it's the best part of the Stem, so it can't be helped. If you don't force it to turn by hand, it's fine for use. View detail
FirmlyHold
It is difficult to attach the parts used to attach the Top Bridge well.
I'm not sure if this product is the cause, but it breaks the Camera on my phone. There are several people around me with this symptom, so I think countermeasures are a must.
View detail
It's pretty sturdy.
I wanted to drop and fix my phone, so I bought this one, which has a good reputation.
I get it, open it up, and there's no Instruction Manual at all! Well, I can just about understand. (Lol)
However, I don't know how to use the attached Cap? or instant glue, so I don't use them.
I couldn't use Glasses Wrench, because Nut for installation is Inch size, so I used MONKEY. This is a pain in the ass.
I put my phone on it, but the anti-falling rubber thing is too tight because my phone is a large size. It seems to break someday.
The fixation itself is gussied up, so I ran around for a day, but there's no sign of the phone falling.
View detail
Check the power supply and volume position on the phone side.
Installation is very easy as it uses Clamps. If you have more than one motorcycle, you can use a BallClamp for each of them.
On the other hand, it is difficult to avoid the switches of the smartphone because of the structure that sandwiches both SIDE. In addition, the rubber for fall prevention was cracked within a year and torn off the other day.
Although it is convenient as RAMMounting system such as the convenience of the attachment and the point that the angle can be freely adjusted, it is about 50-60 points as the feeling of using Smartphone HolderSingle Body.
View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
I need to be able to hang tools.
It is convenient because the Mount base for RAM can be added to the Screw hole of M10.
You can't hang a tool on it so you need to grab it with ArmParts and tighten it.
I've never had it come loose while driving by just grabbing it with the Arm and turning it.
It's not Firmly tightened, so I hope they improve it.
View detail
It's huge.
I installed the WirelessCharger for security purposes.
It's huge. ( pωp)
I can't help but feel that it could have been made a little more compact... I can't help but feel
From the point of view of crime prevention, it seems that the shape of the keyhole also varies, so unless the person who happens to have one that fits is an accidental thief, I think Large is strong.
View detail
Let's fix Cameraetc. which is installed like the image with Cellular Phone Strapetc. for the prevention of falling off.
Additional purchase at Webik!
This product + Arm + Mount + equipment ← will become a considerable weight, therefore, as shown in the title "Camera etc. to be attached like the image is fixed with Cellular Phone Strap etc. for the prevention of falling off. The Company has been
The Double-sided tape of the mounter will be peeled off and fly away because a considerable wind hits it when the running movie is taken as shown in the movie.
As for the number of ratings of the mark, it is because there is no hole to pass Cellular Phone Strap etc. in this Mount itself.
* Video is FZr MEETING driving video
View detail
Not that you need it as a spare, but if it runs out, replace it.
I bought a set of Ram Mounts in August of 2019, and for a while I didn't use this Elastic band, but after an incident where my phone popped out on a large step and hung on the charging Cable, I made sure to put it on properly when using it.
Of the four corners of the phone, I used only two corners of the diagonal, but this may stay in the four corners without Case because there was Ring to put the finger in Case (iPhone8) of the phone. (Probably impossible)
There was no problem at all to keep it fastened with 2 corners, but I feel that it is difficult to fasten because Rubber is hard (not much elasticity), although it may be because Ring is on the back of Smartphone Case.
Because of the lack of elasticity, it was hard to tell how much the Rubber had deteriorated, and it suddenly broke like a tear.
View detail
Rider's wear rate is high.
I was unsure about buying my first smartphone holder, but the Rider around me had a pretty high probability of using it, so I talked to them about it and bought it afterwards.
The motorcycle I installed is a Z900RS, but it was helpful to have the mounting bracket included for the OEM Taper Handlebar.
Also, both the Handlebar side and the Smartphone Holder side have a ball joint-like root of the Arm, so there was quite a lot of angular flexibility.
The only thing that troubled me was that the Nut size of the Bracket that fixes to the Handlebar was 11mm.
I was installing it in a rundown. 'Not 10mm? And then I borrowed an 11mm Wrench from a friend.
As many Riders use it, it feels fine and I don't feel worried about my phone falling out.
View detail