Reviews
I finally got there.
The MONKEY125 splashes mud on the engine, so I installed a down fender and looked at it, but it did not solve the problem completely.
So I was researching on the Net and came across this product.
Fit feeling is good. Drilling Double-sided tape was a little uncomfortable, so I Neodymium magnet, rubber type, 1mm thick. The adhesive was applied and installed on all joint surfaces.
There is no sign of falling off so far, but as an insurance measure, we have drilled a small hole in the side of the mudguard and connected the Brake hoseGuard to the mudguard with an in-hemp palm to prevent it from being lost.
I bought a good product.
View detail
Genuine Pyramid Plastics Enduro Fender for 2020 MT07
A customer wanted to get an extender for their MT07 to help stop water flick from the front wheel. Having not used one of these before on any bike, I asked the customer what they preferred. They chose this one from Pyramid Plastic. Good choice from doing my own research. The fender extender was not hard to find once you put your bike details in the website and the options appear. The extender was not overly expensive and added to a few other small parts in my order, I had them all shipped via EMS. I do have more than one item per order as this does cut back on the shipping cost somewhat. The order arrived in 5 days from being shipped and was well packaged and in 100% perfect condition. The fender extender came in the Pyramid Plastic sealed packet and was wrapped in bubble wrap from Webike warehouse to keep it safe. You do have the option of using the stick pads for this fitment or better yet, just drill the fender and attach for a more secure fit. This was the route we went. The extender is made of and ABS plastic as far as I can tell and the fitment of this is absolutely spot on. The quality of the part is excellent. A nice matte finsih which does go very well with the bike anyway too. I did think there may be a slight gap once test fitting but there was no gap at all. Took a little over an hour to do the job right but the result is really good. View detail
Great extender
A great extender for the front fender, very nice fitment and easy installation. I choose the stick on type with the stickers provided. View detail
PyramidPlastic Red R258 Rear Fender
[Usage]
・Touring
Image Street?
I bought it because I thought it would go well with the OEM color Red RC211VPLOTTypeMotif color.
Finished as per Image.
Is it difficult to install?
Easy
ExactScrew hole fits, not possible, but no machining was required.
How was your experience with it?
I'm satisfied with the results as shown in the Image.
[Included Parts:were they on?
With Mounting Screws and Instruction Manual are only available in English with no illustrations.
[Was there anything that disappointed you?
Nothing in particular.
Rear The part of the suspension that prevents dirt from splashing onto the suspension is not perfect, but it is only slightly less prone to dirt.
View detail
A must-have for any Fender Eliminator
I was worried about mud splatter if I went with the Fender Eliminator!
I've been waiting about 3 months for this too due to world conditions lol.
I'm happy with the design, it's Carbon all the way!
The overall effect is to prevent mud splashes, so it is virtually dirt-free.
There may be some on the TapeLamp area, but I wouldn't worry about it!
I was told that the Tire looks thicker and Parenthesis looks better from the following Motorcycle, so I'm very happy!
View detail
seat bump pad
Whenever riding my RC51 people always as were i got cowl seat bump pad. Very nice piece. View detail
Just fit.
I bought this for the purpose of protecting the Engine area from Small stone bounces and Mudguard.
The installation etc. was as described in other people's impressions, and was secured with strong double-sided tape and plastic screws×4.
I was a beginner at drilling holes for Screw fasteners, but I managed to do my best.
After installation, it feels really natural and truly just fits, just as it did from the beginning.
View detail
Recommended for Fender Eliminator vehicles.
I was able to install it on KATANA.
This is a recommendation for those who are using Fender Eliminator.
View detail
Natural.
The front fender of the SV650 is short, and every time I went touring, the Radiator was hit by small stones and dirt from the water splashing on the road. I installed this product and I think the effect is large.
As for the attachment, it seems to be attached with strong Double-sided Tape. However, because I was a little worried if it was only that, I drilled a hole and fastened it with Screw of the attachment.
It looks so natural. It was there from the start. It's like that, so it's Recommendation.
View detail
Fits: YAMAHA Fazer 600 2002-2003
Understated OEM style design
[How is it used?
I'm using it for street riding and touring.
Was the one you received as per Image?
I wanted something with an understated OEM style design and Image was right on the money.
Material is black gel coat material which is standard for this kind of handmade products.:FRP。
The whole thing was carefully finished and there was no rough surface or section.
Was the installation difficult?
I had some trouble to remove the OEM chain cover and to pass the front mudguard of the Fender between the Tire and Swing Arm.
How was your experience with it?
I imagined that if I remove the OEM mudguard right behind the rear suspension, the air flow behind the engine would be rectified and the cooling efficiency would be improved. I imagined that removing the OEM mudguards would improve the cooling efficiency, but I haven't removed the OEM mudguards yet because I don't think it would make much sense since the engine is not very thermally sensitive. (Lol)
[Included Parts:were they on?
3 screws and 1 oval plate for fixing Fender. 3 screws and 1 oval plate for fixing Fender.
[Was there anything that disappointed you?
If I had to say, it would have been better if the Chain Cover part was 2cm to 3cm longer in the front direction.
Other items that would be helpful
Instruction Manual was included, but of course, it was English version, and moreover, it was roughly large. (Lol)
It is not difficult to install because it has few parts.
Since there are only 3 fixing points, it may be safer to use a low strength screw lock.
The delivery time was about a month and a half, which is reasonable since it was ordered from Europe.
View detail
Simple & Practical but Pricey
It is a simple installation, would not take more than 15 minutes to install. Light ABS material and given strong adhesive double-sided tape is all it needed. Having a mud-guard is practical in helping to guard the beautiful chrome exhaust extractor/radiator from pebbles, mud and sand. Haven't driven in heavy rain yet, hopefully it will hold up. The only drawback is the price. View detail
Fender Eliminator + SprayGuard.
Removed Fender with the presence of KATANA
Lightweight with SprayGuard
The Rear area has been Refreshing.
View detail
Lightweight with SprayGuard
Was the one you received as per Image?
As per Image… The downside is that it's expensive.
View detail
Lightweight with SprayGuard
Was the one you received as per Image?
Lighter than I imagined …Large satisfied
View detail
Fit is outstanding
The fit feeling is outstanding and it fits beautifully! I bought it because I wanted to
I had a hard time with the Plating product, but I thought I'd end up with a Uite even if I put something shiny here Material:Carbon Style
I'm a little dissatisfied with the texture, but considering the price, I'm happy with it
I'm glad I bought it
View detail
Fits: YAMAHA MT07, YAMAHA FZ7, YAMAHA FZ07
Cospa, features and design are enough
I did not know that there was a dedicated adhesive installed OEM Fender PP (Polypropylene) So use Konishi Bond's Ultra versatile PremiumSoft Black to make the glue gap a plastic repair (Black) I filled it with
View detail