Reviews
Fits: SUZUKI SV650 N, SUZUKI DL 650 XT V-Strom, SUZUKI DL 650 V-Strom
The CP is also good.
From the name PyramidPlastic, I was prepared to order some more cheap products.
In fact, the FRPParts arrived with a high degree of precision, which is quite high for exterior Parts from overseas.
The bracket engages the Crankcase Bolt firmly, and the engagement with the FRP part is not bad.
However, the supplied Bolt is a bit short, so you may want to prepare a Bolt of about +5mm.
It is not impossible to stick to FRP, but it does not put a load on FRP, and above all, it increases work efficiency by a large margin.
In fact, a separately purchased DesignBolt was used for installation.
I have the impression that it took quite a long time, but it is because it is an overseas parts.
Considering that the FRP parts are solid and cost only 20,000 yen, the cost performance is also good.
View detail
I finally got there.
The MONKEY125 splashes mud on the engine, so I installed a down fender and looked at it, but it did not solve the problem completely.
So I was researching on the Net and came across this product.
Fit feeling is good. Drilling Double-sided tape was a little uncomfortable, so I Neodymium magnet, rubber type, 1mm thick. The adhesive was applied and installed on all joint surfaces.
There is no sign of falling off so far, but as an insurance measure, we have drilled a small hole in the side of the mudguard and connected the Brake hoseGuard to the mudguard with an in-hemp palm to prevent it from being lost.
I bought a good product.
View detail
Genuine Pyramid Plastics Enduro Fender for 2020 MT07
A customer wanted to get an extender for their MT07 to help stop water flick from the front wheel. Having not used one of these before on any bike, I asked the customer what they preferred. They chose this one from Pyramid Plastic. Good choice from doing my own research. The fender extender was not hard to find once you put your bike details in the website and the options appear. The extender was not overly expensive and added to a few other small parts in my order, I had them all shipped via EMS. I do have more than one item per order as this does cut back on the shipping cost somewhat. The order arrived in 5 days from being shipped and was well packaged and in 100% perfect condition. The fender extender came in the Pyramid Plastic sealed packet and was wrapped in bubble wrap from Webike warehouse to keep it safe. You do have the option of using the stick pads for this fitment or better yet, just drill the fender and attach for a more secure fit. This was the route we went. The extender is made of and ABS plastic as far as I can tell and the fitment of this is absolutely spot on. The quality of the part is excellent. A nice matte finsih which does go very well with the bike anyway too. I did think there may be a slight gap once test fitting but there was no gap at all. Took a little over an hour to do the job right but the result is really good. View detail
I wonder if it's not a pimping?
It was not easy, as I had to shave a little and bend it with a heat gun. View detail
Great extender
A great extender for the front fender, very nice fitment and easy installation. I choose the stick on type with the stickers provided. View detail
Need to be a little creative with Screwdome.
I bought it because there were few other options and I thought it would be better to buy it than to use it by trial and error and have more unnecessary parts.
The bracket for the Right Side is included, but when installed as per the screw holes, the pressure applied to the Fender feels unreasonable, so the existing holes in the bracket need to be widened with a drill or newly drilled to shift the fixing position with the Swing Arm.
Since the two holes on the Fender side do not match at the same time, only one hole was used and the unused hole was filled with black SiliconPate. However, it only takes 20 minutes to adjust the holes on the mounting bracket.
Item number as for FZS600 07214." When 07227. but if it is FZ400 compatible, 5DM series (Fazer 600 1998-2001) of 07214." becomes. 07227. is a 5RT system.
View detail
Depending on the individual, it is an expensive and inferior product!
The product was too shoddy for the high price and inconvenienced Shop who did the installation work.
The tip of the Hugger hit the tire and could not be installed without machining the bolt hole,
It is an amateur and very difficult task.
Depending on the individual, the product is terrible!
View detail
PyramidPlastic Red R258 Rear Fender
[Usage]
・Touring
Image Street?
I bought it because I thought it would go well with the OEM color Red RC211VPLOTTypeMotif color.
Finished as per Image.
Is it difficult to install?
Easy
ExactScrew hole fits, not possible, but no machining was required.
How was your experience with it?
I'm satisfied with the results as shown in the Image.
[Included Parts:were they on?
With Mounting Screws and Instruction Manual are only available in English with no illustrations.
[Was there anything that disappointed you?
Nothing in particular.
Rear The part of the suspension that prevents dirt from splashing onto the suspension is not perfect, but it is only slightly less prone to dirt.
View detail
PYRAMID PLASTIC Seat Cowl for Yamaha MT10SP 2017
This was something I have been thinking of buying for quite a while now. Now I also have the comfort seat for the MT10SP, I thought now would be the time. I was pleasantly surprised that Webike stock quite a few different parts for the MT10 series. Even more impressed that they have the SP seat cowl in the same colours as the original bike has. I always have more than one item in my basket, ready for purchasing. This way, the shipping costs are spread out over all the items and you are not just paying a flat rate for one item. I used EMS fast service for this order and they are now my go to courier from Japan. They just work and get your order to you fast. 5 days from ordering is perfect for my needs. All the items in the box were well packaged, in their own OEM packets and along with bubble wrap and air pockets so there would be no damage in transit. Webike even tape the outer box edges so nothing can escape, be lost or be stolen. Everything arrived in tip top condition, no damage, not even the inner boxes were scraped. A painted cowl being scraped would be absoutley devastating. Not happening here from Webike. Perfect condition on all the parts in the order. Although it only serves a purpose to cover the seat part of the seat, it does it very well. The only niggle is there is a slight bit of touching of the bottom part. Nothing too serious but still, you would expect perfection from a part that is specifically made for the job. This is why I marked it down 1 star, 5 star is only deserved from 100% perfect. Nothing to do with Webike, it is Pyramid that made an error. I will contact them directly to see what they suggest. Pleased with the overall look, even though this is making me want to fix it myself. Thanks Webike for all your help View detail
also
Quantity:Pair (for Left and Right) I stuck it on the Tandem Seat Cover, which is not symmetrical and looks delicate.
After one night, the double-sided tape was not sticky (degreased) and the fitting was not good, so it was lifting. I removed the double-sided tape as soon as possible because there was a risk of it falling off while driving.
I don't even think I would want to install double-sided tape until I had to reapply it.
It was futile.
The product image shows only one direction and is a small size.
I wanted images taken from Up and multiple directions.
If you do, you will be exposed to the poor quality of the product.
View detail
A must-have for any Fender Eliminator
I was worried about mud splatter if I went with the Fender Eliminator!
I've been waiting about 3 months for this too due to world conditions lol.
I'm happy with the design, it's Carbon all the way!
The overall effect is to prevent mud splashes, so it is virtually dirt-free.
There may be some on the TapeLamp area, but I wouldn't worry about it!
I was told that the Tire looks thicker and Parenthesis looks better from the following Motorcycle, so I'm very happy!
View detail
seat bump pad
Whenever riding my RC51 people always as were i got cowl seat bump pad. Very nice piece. View detail
Fits: KAWASAKI ZX10 R, KAWASAKI ZX636, KAWASAKI RSV1000 07-08
It will have a tightened appearance.
I installed this on an external single seat cowl for a GSX250R. It is for NINJA, so it doesn't fit perfectly, but it fits quite nicely. The product arrived more than 2 weeks earlier than expected and the quality of the Level is satisfactory. I don't feel the effect of TouringLevel, but I think it is possible because it makes the exterior look tighter. View detail
It works quite well.
Gold molds are not well made, or maybe it's because of Quantity:Pair (for Left and Right) is an unbalanced product, which I don't think is possible from Japan's point of view, but once it is installed, it is a Quantity:Pair (for Left and Right) The balance of the front wheels is not broken. The effect of preventing mud and water splashes from the front wheels is unexpectedly good, and the effect is very large. It is easy to install, and I am glad that I installed it. View detail
Compared to the cheaper one
P&AInternationalExtender I read the impressions of Fender and found the roughness of the molding to be noticeable and cheap, so I was prepared to be a human pillar and bought this one, which did not have any reviews.
The estimated shipping time for the WeBig was three weeks, but it took EXACTLY three weeks to arrive.
The contents included a FenderBody, a plastic Clip for drilling and fastening, and a Strong Double-sided Tape.
I didn't have the courage to drill holes in the Fender, so I fastened it with double-sided tape only.
The molding, which is of concern, is distorted as expected.
Quantity:Pair (for Left and Right) The upper part of both theQuantity:Pair (for Left and Right) It is not symmetrical.
It is not noticeable once installed, but it may bother some people.
Installation is also quite troublesome since the Front Fender has to be removed.
However, the head cover of the engine's cylinder was also dirty from the mud splashing on it, so we decided to put it on.
I haven't tried the effect yet, but I would like to check it then, as I will be stepping on puddles and gushing water if I drive on mountain roads sooner or later.
View detail
Poor adhesion? Lost while driving
Design and quality are fine, but was the adhesion bad? It flew off and was lost while driving.
Second ・・・・. I still may need a separate double-sided tape.
View detail
Just fit.
I bought this for the purpose of protecting the Engine area from Small stone bounces and Mudguard.
The installation etc. was as described in other people's impressions, and was secured with strong double-sided tape and plastic screws×4.
I was a beginner at drilling holes for Screw fasteners, but I managed to do my best.
After installation, it feels really natural and truly just fits, just as it did from the beginning.
View detail
You get what you pay for
cheapest mudguard It is recommended to install with screws Don't use double-sided stickers, it will make you regret More mudguard length would be better View detail
Fits: YAMAHA Tracer 700, YAMAHA Tracer 700, YAMAHA MT-07
It's better than nothing.
MT is made at low cost. I wish I could have at least put this on… View detail
Fits: YAMAHA MT09, YAMAHA FZ09
Just like the image!
The Magical Under Cowl is a little too large for my image, and other manufacturers are too angular, so I chose this one for its appearance.
I bought it on the assumption that it would be repainted&Bracket processing, because some of the earlier comments said that the bracket didn't fit or that the paint had a wound.
As a result, the paint was even and even, and although the bracket was partially rusted, no special modification was required. (Or rather, the accuracy was normal.)
The enclosed instruction manual was in black and I could not see it at all, and I did not know which screw to insert the bracket, so it took some time to install the bracket while matching it with the actual one.
This kind of Under Cowl is a decoration, so the effect will be Zero. But it is OK because it looks good.
By the way, the Exhaust System was not installed with Other Brand Product (SP Tadao), so I returned to OEM.
The instruction manual was useless and 1 pc of Screw was missing, so I gave it a -1 star.
View detail