Reviews
better than none at all
There is only one way to attach it to the Pipe like the basic Handlebar, but it is possible to wind it around the Pipe The hole is narrower and harder to pass the vines through I wish the hole was a little bigger
If the handlebar is horizontal, the glasses don't sit well on the handlebar It's harder to use it only for cars like American because it's better to put it on
I forgot to leave my Sunglasses on the Meter and ran and ruined it, so I I wanted a place to put my glasses, but it was better than nothing
It helps that if you hang it on this, it won't fall off
View detail
No Velcro in the opening
It is a common type that the opening is fixed with Velcro and wrapped around and fixed with buckle If you try to take out some of the material of the clothes, you can use the Velcro for the opening BALIBALI is beaten If it's my favorite outfit I just bought, I can't even look at it This was my only blind spot
The surface material is just an ordinary nylon material, and only the Inner PVCWaterproofMaterial. so the outside will probably be soaked! I'm sure I've only used it in a drizzle yet, so before that happens, I'm going to use a lot of WaterproofSpray I've used the SIDE Pocket, which is very useful but non-Waterproof
I think that if the opening is a watertight fastener, I can be satisfied with the cosmetic value, but that is a pity It is
View detail
You can call it Back
I attached it to RearSeat of 2018 Ninja 400.
Fixed Strap is too long. Because Ninja's Rear Sets are Small,
Even if it is the shortest it seems to insert about 2 boys Jump under Seat and Back.
Even Ninja, which is not even an SS, is in this state, so it is better to think about installing the small Small Type Motorcycle.
And the most fatal one is that my legs are short, and my legs get caught when getting on / off (Crying)
I also consulted with people in Shop, but if Rear Sets goes too short before Small,
It can not be done behind, so it is de facto.
View detail
It's okay
L Size asks only Right hand thumb, XL items arrived. I wonder if this is something like mail order Manufacturer A little disappointing to order only ...
View detail
Button is loose !?
I bought it because I can hang it from Belt. (Quantity in different colors : 2pc. Set)
The texture is good, the problem is - - Loose snap button.
It is so hard that you can remove it with one hand, so it would be better if you avoided Small items by Large things such as keys..
I can not do it if I try to adjust it by adjustment, but Magic tape made sense of security
Current product safety degree Ya..
View detail
A little more
I prefer DEGNER's products,
Leg bag tried various kinds of Manufacturer so I tried purchasing.
Unlike other products, Belt to wear around the waist,
Since it is a single hang, there is no annoyance to take off and wear every Toilet's time.
Because the storage force is wide and wide in the vertical direction,
There is no problem if it is something like in the product image,
smartphone - Tissue - Hand toweletc. In combination,
Bag It is a feeling that objects are concentrated on the bottom surface and a bulky feeling comes out.
If you can adjust the bulk with SIDEZip like this other Manufacturer around here,
It seems easy to solve...
The surface Zip pocket is two places,
One side is quite shallow and honestly inconvenient to put anything in.
The other side is Pass Case - Tickets can be put in,
Anyway the Zipper is placed straight,
Right If you are wearing it on your feet side and staying in a riding posture, it seems that you will jerk the things in the road w
There is also a sorry degree Zipper pocket in the upper part of the inside,
Since it is also Size that does not even include Cards,
It will not be used w
Overall, is it Design? For people who like it, recommendation.
Leg bag Can not Recommendation for those who require original functionality.
Is it such a feeling?.
View detail
Devices need to be devised
I bought it on the premise of Navigation on a smartphone. As smartphones themselves are becoming Large type, I think that this product is getting hard to use in this application.
Basically, it is a product to be attached to the center part of Pipe Handlebar, but if it is attached variously to Pipe Handlebar, even if only Center part is left open, it can not operate. Since Case is fixed by fixing it, it is assumed that the space required for rotation is opened. In my case, USB port and Drink holderetc. , Those already attached do get in the way and can not operate as it is.
It is currently under consideration so that some Base Spacer can be attached and the Base part can be attached at a distance from Pipe Handlebar.
As a shape, I thought that the position of Fastener was upside down. Basically, rainwater will strike from the front and above basically, so it is not desirable for the motorcycle to have gaps in that direction. There is a gap at the end of Fastener. Well, it is only necessary to attach it upside down, but then, Logo will go handstand.
The USB connecting to the smartphone can be afforded more space-like if using the L-shaped connector.
Considering the small expenditures such as L-shaped Connector and Spacer, I think whether it is better to purchase another product, but if you are a person who can enjoy the idea, I think that there is still more appeal. Wish it was with Visor.
I do not intend to use a hole through Cable, so it is just an obstacle for me.
If you do not put things other than the transparent part, there is nothing to support the part to be attached to Base, so it will be retracted and it will take time to install. The person who stuffed something is easy to operate.
View detail
Good
If Bag is also set to DEGNER, there is no need to worry about hanging position Exactly.
One-touch fasteners to fix on Tandem seat are Belt too long to worry about processing and keep Holder floating when Minus point
If you want to double bag, buying a double bag from the beginning is more stable - Cost performance is good together.
If you wish to add a Bag with a different Single or Size you can use it if you wear it, it is convenient because you can also remove and remove Bag without removing Seat.
View detail
Fits: HARLEY-DAVIDSON SPORTSTER Family
Detachable - Can not be installed on Dock KingHardware kit.
Detachable - I attempted to install this product by removing Kadjima's Saddlebag Support and Slide rail in the car equipped with Dog KingHardware kit, but the thickness of the mounting part was too large to install Bolt and it could not be installed.
Even if a long Bolt can be prepared, it seems that it can not be installed because it interferes with Blinker.
Unfriend that there is no description about that in Homepage.
The product is disappointing although it is solid.
View detail
If it may fly by a wind etc. when the glove is put on the Motorcycle at the time of a Motorcycle stop, it will become obstructive also with having and moving to a hand being unexpected, but it is comparatively convenient if there is this. When it is
If it may fly by a wind etc. when the glove is put on the Motorcycle at the time of a Motorcycle stop, it will become obstructive also with having and moving to a hand being unexpected, but it is comparatively convenient if there is this.
When it is tight in Size and it cannot hold, if it is merely a thick Glove for winter, but it is only a Mesh glove, it is just right touch.
View detail
Although the Tank back of various Manufacturers was looked for, that of Mr. DEGNER is the first cause that having been equipped with CB1300SF (SC54) which I own by the MODEL purchases. It is that I can carry Touring mapple R when it looks for.
Although the Tank back of various Manufacturers was looked for, that of Mr. DEGNER is the first cause that having been equipped with CB1300SF (SC54) which I own by the MODEL purchases.
It is that I can carry Touring mapple R when it looks for.
And don't be so much bulky and say that there should just be net weight so so.
Although it is based in that respect and he thinks that it purchased, the photograph and this with which Mr. DEGNER has equipped CB invite misunderstanding just for a moment.If the position of the
photograph is equipped with a Tank back, a Handle will contact a Tank back at the time of a Handle right-and-left full lock.After
, although it does not understand well, and it is indicated that a magnet is powerful, it is not different from an ordinary Tank back.
Although this is the first time that a Tank back is purchased this time, I,As [ be / a map does not appear and / a Magnet / if it is not the feeling which will look at right under if it attaches / weak ] ...
-- since every Manufacturer will become large if it becomes a Back into whom surely Touring mapple R goes -- unavoidable one -- it is -- I think -.How to take the
photograph invites misunderstanding.Direction which considers
purchase! I am pleased if it becomes helpful.
View detail
[Webike Monitor] It purchased the sake [ when / not using a Waist Bag on the Touring etc. ]. On the Touring of one night, clothing, such as spare clothing, etc. are put into a seat back, and the other comparatively frequently-used thing is put i
[Webike Monitor] It purchased the sake [ when / not using a Waist Bag on the
Touring etc. ].
On the Touring of one night, clothing, such as spare clothing, etc. are put into a seat back, and the other comparatively frequently-used thing is put in.
In the Size exactly good for an about [
day's trip~1 night ] Touring, it is found useful.
When it lies down under a Cowl at
and a high speed, it is good also for the Cushion between a Tank and the body exactly.
The half of
purchase motive be elaborate.
Because a Wound is not easily attached to a Tank even if it will turn down, if it carries out like this.
View detail
it is large than expected! it is too large for the circumference of the Handle of MONSTER 1100 EVO in width, and a Speedometer checks -- ずらく -- ます. It is small than expected! iPhone is a size which does not enter perpendicularly. It wi
it is large than expected! it is too large for the circumference of the Handle of MONSTER 1100 EVO in
width, and a Speedometer checks -- ずらく -- ます.
It is small than expected!
iPhone is a size which does not enter perpendicularly.
It will be a margin if it turns sideways.
-- or it considers another Mount -- primarily -- a Navigation -- not iPhone but
-- Or [ employing a Navigation by PSP now ] ... or [ that it is too small in that case, and a GPS unit does not enter shortly / ? ]
View detail
O Good point and Design, form -- Cool!! (Form collapse is not carried out, either) There are and capacity. (If it is on an ordinary Touring, it is mostly sufficient capacity) , a load, etc. x which is an opening-and-closing mecha
O Good point
and Design,
form -- Cool!!
(Form collapse is not carried out, either) There are
and capacity.
(If it is on an ordinary Touring, it is mostly sufficient capacity)
, a load, etc.
x which is an opening-and-closing mechanism which is easy to take out -- the things (souvenir etc.) which have
and the size which did not suit in bad point
andCB1000R, if
and this which may not enter in a Back's form are attached,
Since it is not thoroughly covered to an inner side even if it attaches
and the Rain cover which the seat back of the Type fixed under a sheet cannot use,
the
□ comment
that a Back gets wet to a rainy weather run -- that was the most regrettable,
it is inclining inside, when the form of a sheet like CB1000R has a triangle and it becomes the weight of a certain grade attached to a Type without the thickness under a sheet.
(When it attached without a load, it was a grade which is not worried, but it is ...)
Shortly after being the Type with which the bottom of a sheet has bent backward like CB1000R again, splashes of mud etc. will start a Side bag directly, and will become dirty.
(I thought that it became even if this uses which Side bag ...) Since it is
, it has a form which does not suit an own Motorcycle, but I think that it becomes a thing which will be easy to use it if an own Motorcycle is suited since structure and the engine performance of this Side bag itself were good.
View detail
The Side bag of a DEGNER is attached to a Sissy bar. It is since a Side bag seldom matches this Motorcycle (since he thinks that it does not suit). .) -- -- as small a Side bag as possible was used. Usually [ ], it removes at the time of
The Side bag of a DEGNER is attached to a Sissy bar.
It is since a Side bag seldom matches this Motorcycle (since he thinks that it does not suit).
.) --
-- as small a Side bag as possible was used.
Usually [
], it removes at the time of riding and attaches it at the time of shopping and a Touring.
View detail
Although the saddle bag of the leather was used, since a capacity is little and maintenance is troublesome, the big back was looked for. It interfered with the back and blinker and I shifted to the front, it covered on a tandem step. I thought that the st
Although the saddle bag of the leather was used, since a capacity is little and maintenance is troublesome, the big back was looked for. It interfered with the back and blinker and I shifted to the front, it covered on a tandem step. I thought that the structure is good. View detail
The brace bar had reached, and since the bag turned around it round and round when its own motorcycle remained as it was, after it carried out the baffle with the U-shaped bolt and the board, it was attached. Although navigation is DTR-P50 of a clario
The brace bar had reached, and since the bag turned around it round and round when its own motorcycle remained as it was, after it carried out the baffle with the U-shaped bolt and the board, it was attached.
Although navigation is DTR-P50 of a clarion, it is touch that it was settled somehow.
if [ an angle / if the shade has reached since it is hard to conclude that sunlight hits although it is satisfactory ] -- I considered.
View detail
[ [or / that there were 2011 /] ] Since it is the first wintergrove to purchase, there is no comparison object, but the fleece of an inner is thick and, to be sure, warm. The fingertip has been numb with cold at the cold time of midwinter. It seem
[ [or / that there were 2011 /] ] Since it is the first wintergrove to purchase, there is no comparison object, but the fleece of an inner is thick and, to be sure, warm.
The fingertip has been numb with cold at the cold time of midwinter.
It seems that a pill is easily attached to the fleece portion of an after cuff.
Possibly there was a thing with my short finger, and operativity was also bad, and it became troublesome to grasp a clutch lever.
Sewing is not so very well, either.
Well, since it is made in china, is it unavoidable?
View detail
It purchased for protection of a bank sensor attachment part. Although he chose the round base guard by the product made from HYOD, a racing suit's is ill-shaped for a location not suiting for a while too. If it can do, you will be wanted to carry
It purchased for protection of a bank sensor attachment part.
Although he chose the round base guard by the product made from HYOD, a racing suit's is ill-shaped for a location not suiting for a while too.
If it can do, you will be wanted to carry out a goods design according to a racing suit manufacturer, but because a price [ a price ], satisfaction is carried out well.
View detail