Reviews
Side bag
I put my camping tent and sleeping bag in it. View detail
Band for installation is too sturdy. (Large sweat)
The mounting band is too sturdy, very stiff. (Large sweat)
Too thick to bend.
The width is a little large compared to the buckle.
Backs require a lot of effort to attach and remove and do not look good.
After much deliberation, we decided to DIY the Mounting Hardware.
The Bag itself is durable and functional!
View detail
Used for GSX-R125
I was using a Suction Cup tank bag for my GSX-R125 because I could not use a magnet tank bag, but I was looking for a Belt type tank bag because it was difficult to fix the tank bag in place.
However, the GSX-R125 does not have a bare Frame, so there are limited places to install a Belt for fixing.
I put it on a footpeg Plate.
The firmly fixable and non-slip backside of the base prevents it from shifting while running.
The back itself is not very large, and it fills up after you put one Rainwear in it.
I don't know if it's worth the price, but I'm not going on a long touring trip with lots of luggage. I don't think so, but it's not like I'm going on a long touring trip with a lot of luggage, and there are only a few bag options available.
View detail
Large size and shape are just right.
The size and shape are just right. The thickness of the gusset is also good.
unassertive (Extremely normal) Because it is Design,
I think it fits any person and motorcycle.
View detail
Bag of Exactly on 4mini
It was installed on DAX via Laflo's Support.
I decided on this product after much searching, as a large bag doesn't suit the 4mini, and the wide design doesn't fit either.
In particular, the width of the bag is 260mm, which is quite unusual for a bag of this size, and I think this is the only bag that is this high.
The gusset is 130mm, so you don't have to worry about interference with the road surface.
The quality of BagBody, Belt for fixing, Buckle, etc. is quite high, and I think the finish is commensurate with the price.
I wonder if it is a courtesy that the Rivet and D-tubes on the back side are prone to rust.
I think this product is recommended for LargeEngine Displacement Volume machines if you are not looking for capacity and are concerned about appearance.
View detail
Side panier case of other companies (SHAD SH23) Purchased for inner bag of
Was the one you received as per Image?
I purchased the measurement in advance, so it was generally as I expected.
[How did you feel about the Fit?
I would have liked it to be a little wider….
How was your experience with it?
The wide frontage seems to make it easy to put things in.
[Was there anything that disappointed you?
It seems unlikely at the moment.
How did it compare to other products?
It is narrower than the tote bag I used to use, but thanks to the wide opening, I can put more things in it, so I am satisfied with its usability.
View detail
Belt Type Tank Bag
Since Motorcycle was replaced by DL1000 V-STROM650XT,
The DEGNER magnetic tank bag I used to use for my on road motorcycle did not hold the bag securely, and I had trouble with it coming off the tank when riding dirt.
Looking for a tank bag that will not come off even when driving on a dirt road and that will hold a touring mappleR.
I purchased this DEGNERBelt Type Tank Bag.
The base of the tank can be securely fixed with a belt, and the tank bag is fixed to the base with a buckle.
I just installed it and I am looking forward to driving on forest roads and other dirt roads.
View detail
In fact, not yet.
I bought this to put on my old vehicle. I want to use it for long touring somehow. I am still testing. View detail
It is like a spare, although it comes with a Large body in DEGNER's Bag.
It would have been better if there was a belt loop to hold the excess portion of the belt. View detail
I like the Waterproof.
The area where it contacts the body of the car has a small hole due to rubbing.
We need to get a little creative.
The waterproof function is safe and can safely hold sleeping bags and other items that you don't want to get wet.
The capacity is also sufficient.
View detail
Just the right amount of Large
I have been interested in this product for a long time, so I bought it.
I have been attaching NB-3 to YamahaBOLT Shoulder Bag.
The bag is a bit more compact and the military style design was what I was expecting.
However, I was expecting that the pockets on both SIDES would hold at least a 500ml plastic bottle, but I was a little disappointed that they were too large to hold even sunglasses. (What is the purpose of these pockets?).
View detail
Bag ideal for off-road vehicles and MOTARD systems
It is permanently installed on a KTM690SMC-R.
Exhaust System Up Type off-road motorcycle, MOTARD, etc., exhaust heat from the silencer side melts the bag, so it is personally troublesome to install the bag on both SIDES.
This product can be mounted on the opposite side of the Silencer, is easy to attach and detach, and its size is ideal for light storage for day to overnight touring, making it easy to install and use permanently.
If you are so inclined, you can buy another one and use both SIDEs while taking measures against heat exhaust, so it is highly universal.
Waterproof and durability are not as good as Enduris Tan, but the balance of price and usability is high and I like it very much.
View detail
It is quite easy to use, but not for smartphones.
It looks good when attached to the vehicle body.
Basically, I don't want to wear bags on my body and I don't want to put anything in my pocket, so the size is just right:not too large, not too small, and not in the way.
I was able to go on a 3 night touring trip using a TANAX Mini fieldBag and a Fanny pack.
Clear case is small in size for a smartphone.
In addition, since the cable connection is on the bottom and the cable is inserted from the top, it is easy to damage the cable and the connection, so it cannot be used while charging.
View detail
SeatBack
The zipper allows the volume to be changed to three different levels, with the Large being the most convenient, and the Small being the smallest for day-trip touring, making it easy to get in and out.
I like the design, the price is right, and it is a good buy.
A friend of mine bought the same Back and uses it conveniently.
View detail
Might be good to use with Double
I put it on the SIDE of my TENERE700 and it fills up on an overnight touring trip with a rain jacket, change of clothes, and toweletc. So I bought another one and put it on the Quantity.:Pair (for Left and Right) The other side can hold a change of clothes, a Towel, and a space for souvenirs. View detail
Water resistant, durable, good looking!
It is water resistant, durable, and opens easily to hold anything. After much thought, I decided not to use it on the SIDE, but to use the BagBody clasp to quickly fasten the D-can and carrier to the front carrier with a cargo belt! It feels great and I am satisfied with it. View detail
Compact and easy-to-use Large size.
I use it for short tours and small purchases.
Was the one you received as per Image?
It was a little smaller than I expected (no problem).
Thanks to its compactness, it does not affect the Riding position even when placed on a tank, making it very useful.
This compactness is especially appreciated for SS models with a strong forward lean and for motorcycle models with low handlebars of the separate type.
How was your experience with it?
Above. It was a little smaller than I expected." The zipper is easy to use, and it has enough storage space for this size.
[Points to note]
It is better to check the size that meets your purpose of use and, in some cases, to check the actual product at a motorcycle accessory store before purchasing it to avoid any regrets later.
Suction cup type may be difficult to adhere to tanks with complicated shapes or matte painted parts.
How did it compare to other products?
Assuming that there are individual differences, the movement of each zipperretc. is smooth without getting caught, and it is a well-tailored product without feeling stress when taking things in and out of storage (I used to have a cheap tank bag that had many zippers that got caught, and it was very frustrating). ).
0Other items that may be useful include
Point and hang of installation
As mentioned above, the suction cup type can be installed regardless of the material, but avoid tanks with a shape that is difficult for the suction cup to adhere to or surfaces with a matte finish.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
I fully understand that it is a finishing touch, but I would be happier if it were a little cheaper.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON DYNAFamily
Simple
I used to use a large size (18?), but I wanted to keep my motorcycle simple, so I bought this.
I like it very much
View detail
Easy to use
Design is good, and the shape fits well in the Seat.
It is highly functional and can be carried as a backpack even when removed from the motorcycle, making it very convenient.
The capacity can also be changed to accommodate urgent luggage.
View detail
Adhesion is sufficient for driving.
Used on NSR250R.
I found it difficult to ride a Motorcycle with Separate handle because there will be almost no space between the chest and the Tank.
However, it is convenient because it is attached simply by stretching it before driving and does not shift during driving.
One problem, which is common to the Magnet formula in general, is that
Magnetic Cards such as CashCardetc. should be placed in a compartment far from the Magnet section.
Card will not be available.
View detail