Reviews
I wanted it to be included from the beginning... Helmet holder
Easy to use and reasonably priced. It is a satisfactory product if you are not particular about the price! View detail
DAYTONA, after all!
I have never used expensive gloves, so I can't compare them, but they are easy to use for the price and the size is just right, so I use DAYTONA gloves.
But.... One drawback is that the Gloves color comes off on my hands, but I don't mind because it comes off as soon as I wash it,
View detail
![Compact half cover [large]](https://img.webike-cdn.net/catalogue/images/91554/22144_TS.jpg)
Fits: KAWASAKI Z1000J1, KAWASAKI Z1000J2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE+, KAWASAKI Ninja H2 CARBON, KAWASAKI Ninja H2, KAWASAKI Ninja H2 SE, KAWASAKI ZEPHYR1100 RS, KAWASAKI 1000GTR, KAWASAKI GPZ1000RX, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100 II, KAWASAKI ZZR1100(C)(ZX-11), KAWASAKI ZZR1100(D)(ZX-11), KAWASAKI ZEPHYR1100
Small
I bought it for my BMW R1150GS because it fits VST 1050, but it is smaller than I expected. I bought it knowing that it would not fit over the SIDEPannier, but I did not expect that it would not fit over the Top case either. The storage is compact. View detail
DAYTONAFilter wrench
I bought it for my motorcycle, but I can also use it in my car. View detail
DAYTONA Filter wrench
I bought it for my Motorcycle, but it can be used for my car as well. View detail
The more you use it, the more you understand! he said.
The more you use it, the more you will know! I had a sore butt after 150km of touring, but the distance was a little longer than the OEMSeat and the pain was a little less (personal opinion). The footing is a little worse when stacked because of the thickness. Also, if you don't attach the strap, the tongue will look obtrusive. View detail
Quantity at the time of acquisition of the vehicle inspection:Set
In the case of a used car that has been customized, there may be a case where there is no reflector around the number, so it may be useful when acquiring a vehicle for inspection. I think that this item is always carried by car inspectors.
There are various types of ReflectorSingle Body with Screw Fixing, and with Bracket which is co-tightened with License Plate, but if you have space, we recommend this one which is highly universal and only requires double-sided tape. If you have space, we recommend this type, which is highly universal and inexpensive.
Double-sided tape is also 3M, and DAYTONA is the best for this kind of detail.
View detail
Alternative to Tank Pad
I put it on my CBR600RR instead of Tank Pad. At a glance, it looks as if nothing is attached.
It is cheaper than the Tank Pad, doesn't spoil the original design of the motorcycle, and has the same functionality.
View detail
Fits: Others
Orthodox USB port
[How is it used?
no problem
Was the one you received as per Image?
Wiring is also discreet and Refreshingly cohesive.
How was your experience with it?
I was able to charge my phone with no problem.
[Points to note]
I doubt that it will be Waterproof on rainy days.
Other items that would be helpful
Installation Point or hang
:Rare/old cars should be installed by a store you can trust.
View detail
I feel more secure.
The softness of this product allows it to be taken out and put in through a narrow entrance. Until now, the entrance was made of soft urethane that could be rounded up to a small size, and only a comfort pad could be put in. Moreover, it has CE Standard, which gives me more peace of mind.
I don't know about the protective nature of the rating, so I have given it no stars, which does not mean that it is bad.
View detail
Fits: KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250, KAWASAKI ELIMINATOR 400, KAWASAKI ELIMINATOR 400SE, KAWASAKI ELIMINATOR 400LX, KAWASAKI ELIMINATOR 400, KAWASAKI EN400 TWIN, KAWASAKI ELIMINATOR 750, KAWASAKI ELIMINATOR 900, KAWASAKI 1400GTR, SUZUKI V-STROM1000, SUZUKI V-STROM1000, YAMAHA DSC400, YAMAHA DS400, YAMAHA TDM900A, YAMAHA TDM900, YAMAHA DSC1100, YAMAHA DS1100, YAMAHA FJ1100, YAMAHA V-MAX
I chose it for Large type Adventure.
I bought this for my BMW R1300GS. I chose the 4L model based on the model that fits the car and it was the right choice.
However, since I do not have a Top case or Large case on my GS, the Rear area may be small when it is attached.
I have purchased several Motorcycle Covers in this series and they come with a Heat Seat to minimize the effects of Exhaust System heat. When this is attached, even if there is a little heat in the Exhaust System, it does not affect the Cover.
View detail
Fits: HONDA NM4-02, HONDA NC750X, HONDA NC750X, HONDA NM4-01, HONDA NC750X LD, HONDA NC700X LD, HONDA NC700X, HONDA NC750S, HONDA GB350, HONDA INTEGRA S, HONDA INTEGRA, HONDA JADE, HONDA NC700S, HONDA GB350 S, HONDA GB250, HONDA CL400, HONDA CBR250RRR, HONDA CBR250RRR, HONDA CBR300R, HONDA CBR400R
Reliable DAYTONARed Pad
I have been using Red Pad for generations for my city riding and Touring Main Machine, so I didn't feel any particular anxiety.
It seems that the previous owner had DaytonaGolden in his car, and even with the same grip, the Golden felt like it stopped with a final jerk, but the Red Pad feels like it stops naturally with the same deceleration ratio until the end when it stops smoothly, so I prefer the Red Pad for control.
This is a balance of Tire performance, disc, front fork and rider's weight, so please take this as a personal opinion.
View detail
Fits: KAWASAKI KR-1, KAWASAKI ZXR250 R, KAWASAKI GPZ400R, SUZUKI RGV250 gamma, KAWASAKI ZXR250 R, KAWASAKI ZXR250, SUZUKI RGV250 Gamma-SP, SUZUKI RGV250 Gamma-SPII, SUZUKI RGV-Gamma 250SP, KAWASAKI Zephyr 400, KAWASAKI Australia, New Zealand and the United States, KAWASAKI ZXR250, KAWASAKI ZX-4, KAWASAKI KR-1S, KAWASAKI KR-1R, KAWASAKI GPX250R-2, KAWASAKI GPX400R, KAWASAKI GPX250R, SUZUKI RGVRG250 -SP, SUZUKI RGVRG250 -SP II
This is good. No, this is good.
[How is it used?
SEA BASSRGV250Γ (VJ22A) I purchased this product as a for Rear of
I usually use it for touring and it was about time to replace it, so I replaced it for the full-fledged start of the touring season.
How was your experience with it?
I found out at the time of exchange that the previous owner was also using a Red Pad, so the exchange was for the same product.
Gamma's Rear is very easy to replace because the entire caliper can be removed from the Support without even removing the Tire.
Naturally, the Brake works the same, etc., and there is nothing special to mention, but I am satisfied because I was not dissatisfied at all from the beginning.
The braking force is sufficient for the Rear Brake Disc Rotor, and we want to reduce the wear of the Rear Brake Disc Rotor as much as possible, so we think this is the most appropriate choice.
I like the fact that the packaging is designed to prevent the pads from hitting each other.
How did it compare to other products?
Decent may be a misnomer, but DAYTONA was the only decent manufacturer that had a lineup of VJ22A for Rear.
I chose Semi Metal's Red Pad almost exclusively for touring use, because I am a 2-stroke driver, and I am very careful with Brake.
[Points to note]
Naturally, since this is only PadBody, you should also prepare Grease and, if necessary, Brake fluid.
【Review】
It is such a standard Pad that it is almost the only choice for Gamma for Rear.
And yet it is relatively Wallet-friendly, so I wouldn't even consider anything else in my mind.
View detail
![[Highsider] Bar End Mirror FERRARA](https://img.webike-cdn.net/catalogue/images/68105/15164_TS.jpg)
Very good!
I used high cider a lot since I was headed there because it has a good texture and is easy to handle.
This product was less expensive than the rest of the Series, but the design matched the body of the car to which it was installed.
The bracket connected to the mirror is separate from the bar end and can be easily detached, so it can be used when driving on circuits, for example, and the angle can be easily changed or the top and bottom can be easily replaced.
The design and “y Casting feeling ” are also high Level, but the Variation of the Spec. and the ease of use are highly recommended.
You can be proud to say that you are a manufacturer in Germany.
View detail
I am very happy with the installation and the effectiveness of Wind Screen!
[Color] I couldn't decide whether to use Smoke or Transparent.
Point of Selection I did not want to change the original image of the Eliminator to a large size by adding the Screen, and I considered the windproof effect of the Screen first and foremost, [Color] I made it a little taller and more transparent than Smoke.
Impressions before and after installation The screen looks very small, and before installation, I had doubts about the windproofing effect, but I experienced a windproofing effect that was larger than expected. Especially when driving at high speeds, the wind that used to hit my body directly became considerably softer, and I feel that stability and fatigue during driving were drastically reduced.
[… So, in a nutshell. I installed it and it was”great” to the best…. This is my current opinion….
Installation work When I purchased the bike, I read the instruction manual on the Internet and initially thought I would install it myself, but as a novice at removing the bikini cowl and headlight, I felt it would be too complicated and I was worried about failure, so I had it installed at a shop. However, I was worried that it would be too difficult for me, a novice, to remove the bikini cowl and headlight, etc., and I was worried that I might fail to do it.
Photo after installation.
Since it is a transparent Screen, I don't think the photo will do it justice, but please take a closer look at it, such as by zooming in Larger. It is not noticeable and you can feel the effect, and I think it looks very nice.
View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
the same as it was reputed to be
As per other reviewers, it's still difficult to put it up.
The Exclusive Design and Just Size are not tolerant of mistakes, and even if the center part of the main body can be managed, it is very difficult to put the thin and round surrounding parts in the right position.
Seat was thin and stretched when working with it... I was out of my depth.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI 1400GTR CONCOURS14, KAWASAKI MEGURO K3, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R SE, KAWASAKI Ninja ZX-10RR, KAWASAKI Ninja ZX-10RR, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-6R, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI W800CAFE, KAWASAKI W800 STREET, KAWASAKI Z1000, KAWASAKI Z750
Repeat Confirmation
Reliable DAYTONA Oil Filter with Packing.
The price was on the low side, so I'm sure I'll be buying more in the future.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI Gixxer 150., SUZUKI Gixxer 150.
This is all you need to be perfect.
As the name suggests, it is Perfect!
Gasket included in all areas, so no need to worry.
This is a necessity for Oil replacement.
I always Repeat with Oil.
View detail
FirstDisplayMonitor
Installation was done by Dealer.
The hardness of the USB port, the problem of breaking if the USB port is not facing the right way, and the hardness when removing the USB port from the Slide, etc., give the impression that the product is not made with frequent connection and disconnection in mind, although it is possible to remove the USB port.
So it is basically to be used with it attached all the time. It is possible to put Wire through it to prevent theft, so I recommend using it.
I feel Merit to have a wired connection as well as a wireless connection, but you need to be careful not to lose the USB Cap!
I have not used it that much yet, but the screen is large, visibility is high, and Response is not bad.
View detail
Used for detachment of Clutch and Flywheel
I think it is a reliable Manufacturer.
If there is oil on it, it will not hold firmly.
Large cut is to degrease the part to be removed and the place where the tool comes in contact with it!
It was easy to use
View detail