Reviews
Great product at a great price
Was looking for a more affordable pair of gloves and stumbled upon this Japanese brand. Decided to give it a shot and try it out. Fits well and feels comfortable and well made. View detail
I love it
I didn't expect so much because of the low price, but I liked them because they have a better texture than I expected and they are Side GoreType, so they are easy to put on. View detail
Bracket on the bar does not fit.
The angle of the bar mounting Bracket is not correct. I was able to bend it by force, so I guess it is acceptable, but I wonder if it is such a lax thing. Or did I receive a different product? View detail
Fits: HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80LT, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI WOLF200, SUZUKI WOLF250, SUZUKI ST250, SUZUKI NZ250, KAWASAKI Z250FT, KAWASAKI Z250FT, KAWASAKI Z250LTD, KAWASAKI Z250LTD, KAWASAKI ZXR250
I made a mistake in my Size selection.
Motorcycles like mine with a Rear Carrier installed should be 1 or 2 sizes larger than the appropriate size.
If this Cover gets damaged, I'll go for 2SizeLarge next time!
View detail
Fits: YAMAHA VMAX , HONDA FTR223, KAWASAKI GPZ900R, KAWASAKI KSR-1, KAWASAKI KSR-2, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR400, YAMAHA VMAX, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MAJESTY250(4HC), YAMAHA YZF-R1, YAMAHA YZF-R25, YAMAHA YBR250, YAMAHA YZF-R1
Cospar good
Since it is DAYTONA, it is safe.
It is more subdued in appearance than other Mesh hose.
Banjo bolt and Washer if attached.
It was even better.
A is Straight and 20 degrees though,
I would have liked to have had 20 and 20 degrees if possible.
View detail
Fits: Others , SUZUKI V STROM 650
Handlebar vibration reduction
Yesterday, I went on a Touring of a little over 200 km to test this Bar End.
Overall, I think Handlebar vibration has decreased. In particular, I felt less vibration around 100 km on the highway.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Ninja1000SX, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R
It is easy to install. and the visibility has increased!
It is easy to install. and it gives me a wider field of view and helps me when changing lanes. one drawback is that it is not easy to remove. View detail
Fits: KAWASAKI 250TR, KAWASAKI CS250, KAWASAKI ESTRELLA, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA Custom, KAWASAKI ESTRELLARSCustom
Highly reliable product.
It has nothing to do with ride quality, but it is necessary. View detail
Fits: Others Universal
I wanted something inconspicuous.
Reflector is now required for installation of KOSORear Mudguard KS-MGXF-01.
We chose this product because it is not assertive and prevents the License Plate from bending.
Reflector was replaced with KIJIMA Reflector Slim 3, part number 305-2146.
KIJIMA Reflector Slim 3 can be installed without modification, and both the reflector included with the product and KIJIMA products are secured with M5 Hexagon Nut.
We believe that measures to prevent loosening of the Nut are necessary.
There are several ways to prevent nut loosening, but in my case, I use Nylon nut (something like Self Locking Nut) I used the
View detail
Fits: HONDA AX-1, HONDA CB250F, HONDA CB250R, HONDA CB400SS, HONDA CBR250R, HONDA CBX125Custom, HONDA CBX125F, HONDA CBX250RS, HONDA CBX250S, HONDA CL250, HONDA CL400, HONDA CRF250L, HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250RALLY, HONDA FTR250, HONDA GB250 CLUBMAN, HONDA GB400TT, HONDA GB500TT
Stable and secure.
Since I once bought a cheap Chinese Other Brand Product on Amazon and had a large failure, I have chosen this one from DAYTONA, which I can use with peace of mind! This time, I bought it as Single Item, but the Washer and O-ring Quantities are available.:Set products are convenient. View detail
To improve safety
Purchased to replace the Chest Protector on a DEGNER Leather Jacket.
We narrowed down our choices to a few products, and even though the shape looked good, there was no entry for dimensions, so we decided on this product made by DAYTONA, a Level 2 company with a shape and dimensions close to those of the other products.
After trying on the Protector, I found that the thickness of the Protector is double that of the Standard Equipment (about 16mm), so there is some pressure on the chest, but I believe that the safety has been improved.
The weight is One Side100g.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
For MONKEYBore up
I think it's a good product
Always clean the chain with Oil before installation!
A considerable amount of iron dust waste is produced.
View detail
The current model was no good.
I installed it on my current LEAD125 and it was not difficult to work on.
I thought the LEAD125 was large and durable, thinking there would be little change from the 2BJ-JF45. I will replace it with an Asahi windshield product as soon as possible.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA BROSProduct1, HONDA BROSProduct2, HONDA CB-1, HONDA CB-1 TYPEII, HONDA CB1000R, HONDA CB1000R, HONDA CB1000SF, HONDA CB1000T2, HONDA CB1100, HONDA CB1100SE, HONDA CB1100EX, HONDA CB1100BLACKSTYLE, HONDA CB1100RS, HONDA CB1100E Package, HONDA CB1100RS Final Edition, HONDA CB1100EX Final Edition, HONDA CB1300 SUPER TOURING, HONDA CB1300SF
Cospa best
Inexpensive and perfect quality
Safe to use
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA XJR400RII, YAMAHA DIVERSION, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJ400ZE, YAMAHA XJR400, YAMAHA XJ400Z, YAMAHA XJ400ZS, YAMAHA XJ400D, YAMAHA XJ400S, YAMAHA XJ400, YAMAHA SR400, YAMAHA FZR400RR-SP, YAMAHA FZR400RR, YAMAHA FZR400, YAMAHA FZR400R, YAMAHA FZR400
SUPER SPORTS750Middle to Exactly
ExactSize for YZFR-7, CBR250RR, etc. Can also be used loosely for pcx160.
Ventilation in the Mirror position provides excellent heat exhaust and prevents heat buildup even in the summer.
View detail
Silver insert color is nice.
Installed in conjunction with Grip replacement.
Since the motorcycle has many plating parts on the body, silver was selected as an accent to the handlebar's black.
The color is good and the Silver looks good.
We considered heavier products, but chose this product with less thickness considering the width when parking.
View detail
Reduced vibration sensation
Replaced from YB125SP OEM.
With OEM, we replaced it with this Clip to deal with the vibration when the Speed continues over 60km.
It is comfortable to the touch even with bare hands and does not slide around too much even with gloves, so it is very easy to use.
The crucial vibration is also clearly reduced compared to the OEM, and the effect is likely to be felt even during long hours of touring.
View detail
![[DAYTONA x AC SANCTUARY] RCM Concept COZY Seat [COMP]](https://img.webike-cdn.net/catalogue/images/101907/24329_TS.jpg)
Fits: KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
A little disappointed.
The design is great, but long touring is a pain in the butt for me personally.
As a result, I purchased DAYTONA's Gay Lupinz.
View detail
If you are looking for LED Blinker, this is the one.
It comes with a conversion connector so I can just replace the OEM blinker relay and not have a high flasher. View detail
Looks are the top priority, so it is very Parenthesis good!
I usually wear 26.0-26.5cm, but these boots were too tight for 26.5cm, so I decided to go with 27.0cm, which is a little larger. I would not have bought it without the Fastener. Still, because of the slim design, I had to open the fastener all the way by hand to get my foot into the Smooth.
The fastener cover is also very nice, as it prevents the frame of the motorcycle from being scratched by the fastener, which is not necessary if the fastener is on the outside of the boots, but it is a bad parenthesis.
I thought the toe part had a built-in Shift changeGuard, but it does not. That said, the leather is thick enough that my thumbs did not get sore after 3 hours of driving 120km or so on a mountain pass.
I heard that there is a Protector in them, but I am not sure because they are not thick enough.
The looks are outstanding and this is a traditional NAKED to ride with. (GB250 CLUBMAN) It is the best Fit for the "I", but the functionality is secondary. The soles are not very thick, but they are hard, so quick movements are not a strong point.
View detail