Reviews
Fits: SUZUKI Bandid 400 Limited V, SUZUKI Bandid 400VZ, SUZUKI Bandid 400 Limited, SUZUKI Bandit 400, SUZUKI Bandid 400V, SUZUKI Bandit 250VZ, SUZUKI Bandit 250 Limited, SUZUKI Bandit 250, SUZUKI Bandit 250, SUZUKI Bandit 1200, SUZUKI Bandit 250 V, SUZUKI Bandit 1200 S, SUZUKI Goose 250, SUZUKI Goose 350, SUZUKI Inazuma 400, SUZUKI Impulse 400, SUZUKI Impulse 400, SUZUKI Impulse 400, SUZUKI Impulse 400 Type S, SUZUKI TL1000S
Purchase and installation of Daytona Red pads
Daytona Red pad installation work
The pad was worn out and had to be purchased and replaced. Lining angle etc. surface grinding, numbering on the back plate, mounting on Caliper, quantity on the Swing Arm.:Set, adjust the fluid amount, then the piston, and finally adjust the stop-lamp to complete the installation.
View detail
Fits: SUZUKI BOULE VARD 400, KAWASAKI ZX-14R, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI XN85TURBO, SUZUKI GS650G, SUZUKI GSX-R750SPR, SUZUKI GSX-R750W, SUZUKI GSX-R750R, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX750RR, SUZUKI GSX750R, DUCATI M1200, DUCATI DIAVEL CARBON FL
Air vent not working?
Waterproof performance, fixation, and clarity before and after are not a problem.
The GSX1300R HAYABUSA was securely fastened and was Large sturdy and did not flap even in a typhoon.
However, it is written that there is a hole for moisture drainage in the Mirror section. However, it is just an external appearance, and the hole is normally blocked.
This does not pull it out at all. Or perhaps it is defective?
View detail
Fits: SUZUKI GS1200SS, SUZUKI GSF1200S, SUZUKI GSF1200ST, SUZUKI GSF1200V, SUZUKI GSF1200SV, SUZUKI GSF1200SAV, SUZUKI GSF750, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSR250S, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR750, SUZUKI GSX-8S, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000
If you want to have fun with frequent adaptations, this is the way to go!
I can't say for sure since the Pit worker replaced it, but the desire for clear Oil is perfect! View detail
Fits: SUZUKI BOULE VARD 400, KAWASAKI ZX-14R, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI XN85TURBO, SUZUKI GS650G, SUZUKI GSX-R750SPR, SUZUKI GSX-R750W, SUZUKI GSX-R750R, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX750RR, SUZUKI GSX750R, DUCATI M1200, DUCATI DIAVEL CARBON FL
DAYTONA Motorcycle Cover WaterRegisternt
The Chain hole is color-coded so that it is easy to see the front and back, making installation hassle-free.
It also has a rear binding strap to increase the fit.
View detail
Fits: SUZUKI GS1200SS, SUZUKI GSF750, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSR250S, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR750, SUZUKI GSX-8S, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1100, SUZUKI GSX-R1100W
Drain Washer Size is different.
Drain the oil, replace the filter, and put the quantity on the drain bolt.:When I matched a set of Drain Washer, the size was completely different. I didn't have any on hand, so I thought about forcibly tightening it, but I didn't want the oil to seep out, so I had to go buy it in the middle of the work. I had to go and buy it in the middle of the work because I didn't want to have to go and buy it every time. I won't buy any more. View detail
Fits: SUZUKI GS1200SS, SUZUKI GSF750, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSR250S, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR750, SUZUKI GSX-8S, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1100, SUZUKI GSX-R1100W
Drain Washer and Quantity:Set is good.
I used to buy Drain Washer and Filter separately when replacing Oil, but now I can buy Quantity:It is very convenient because it is sold by the Set.
Especially when I bought Drain Washer for the first time in a long time, I didn't know the Size and had to look it up every time, so I didn't have to go through that trouble (laugh).
View detail
Fits: SUZUKI BOULE VARD 400, KAWASAKI ZX-14R, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI XN85TURBO, SUZUKI GS650G, SUZUKI GSX-R750SPR, SUZUKI GSX-R750W, SUZUKI GSX-R750R, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX750RR, SUZUKI GSX750R, DUCATI M1200, DUCATI DIAVEL CARBON FL
Just fit!
SIZE 3L purchased
400X with OEMRear Carrier (NC56) Attached to
Just fit!
View detail
Fits: KAWASAKI W400, HONDA CB1100, HONDA CB1100 typeI, HONDA CB1100 II, HONDA CB1100 EX, HONDA CB1100 BLACK STYLE, HONDA X11, HONDA X11, HONDA CB1000SF, HONDA CB1000SF-T2, HONDA CBR1000RR, HONDA CBX1000, HONDA CBX1000, HONDA GL1000, HONDA CBR929RR, HONDA VFR800, HONDA VFR, HONDA CB750FA, HONDA CB750FZ, HONDA CB750FB
Not possible, not impossible.
It is used for REBEL 1100.
Size is fine, texture is reasonable, no complaints.
It will be easier to use if the front and rear can be distinguished with a quick glance.
Also, the Heat Resistant Seal was difficult to apply and failed, resulting in WrinkleWrinkle...
View detail
Fits: SUZUKI GS1200SS, SUZUKI GSF1200S, SUZUKI GSF1200ST, SUZUKI GSF1200V, SUZUKI GSF1200SV, SUZUKI GSF1200SAV, SUZUKI GSF750, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSR250S, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR750, SUZUKI GSX-8S, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000
DAYTONA Oil Filter
I chose this one because it was the cheapest, and it is sufficient. View detail
Fits: KAWASAKI Z1000J1, KAWASAKI Z1000J2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE+, KAWASAKI Ninja H2 CARBON, KAWASAKI Ninja H2, KAWASAKI Ninja H2 SE, KAWASAKI ZEPHYR1100 RS, KAWASAKI 1000GTR, KAWASAKI GPZ1000RX, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100 II, KAWASAKI ZZR1100(C)(ZX-11), KAWASAKI ZZR1100(D)(ZX-11), KAWASAKI ZEPHYR1100
To prevent night dew
[How is it used?
This may not be how it is supposed to be used, but I was looking for a Motorcycle Cover to prevent my motorcycle from getting wet in the rain or dew the next morning after storing it outside during the Enduro race the day before.
I used to use a blue sheet before I purchased this product, but I saw someone using a HalfCover, and I thought that a half cover, not a full cover, would be easier to move around in, so I chose this product.
There are two sizes available, and I chose the large size, but I have no problem with the size.
It is always kept in the Transporter because it is very compact when folded up with a storage bag.
View detail
Fits: KAWASAKI Z1000J1, KAWASAKI Z1000J2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE+, KAWASAKI Ninja H2 CARBON, KAWASAKI Ninja H2, KAWASAKI Ninja H2 SE, KAWASAKI ZEPHYR1100 RS, KAWASAKI 1000GTR, KAWASAKI GPZ1000RX, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100 II, KAWASAKI ZZR1100(C)(ZX-11), KAWASAKI ZZR1100(D)(ZX-11), KAWASAKI ZEPHYR1100
I bought it because I thought it would be nice and not bulky.
The evaluation is appropriate because it has not been used yet (^. ^;
There is a way to cover the whole thing, but it's too bulky (crying).
Then I found this product and bought it.
It is quite compact and just as I imagined. (^^) v
It will be active as we are planning to Hokkaido Two this summer.
View detail
Fits: SUZUKI SV400S, SUZUKI V-STROM650X, SUZUKI V-STROM650, SUZUKI V-STROM250XT, SUZUKI V-STROM250, SUZUKI V-strom800DE, SUZUKI V-strom1050DE, SUZUKI V-strom1050XT, SUZUKI V-strom1050, SUZUKI V-strom1000XT, SUZUKI V-strom1000, SUZUKI V-strom1000, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI SV650, SUZUKI BOULEVARD800, SUZUKI BOULEVARD400, SUZUKI BOULEVARD400, SUZUKI BOULEVARD400, SUZUKI BANDIT1250F
Customized Exhaust System was not allowed to replace the Element, but it could be replaced.
The Customized Exhaust System was not allowed to replace the Element, but with the Daytona Oil Filter, it was possible to replace the Element without removing the Exhaust System. View detail
Fits: SUZUKI BOULE VARD 400, KAWASAKI ZX-14R, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI XN85TURBO, SUZUKI GS650G, SUZUKI GSX-R750SPR, SUZUKI GSX-R750W, SUZUKI GSX-R750R, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX750RR, SUZUKI GSX750R, DUCATI M1200, DUCATI DIAVEL CARBON FL
I think it is the minimum necessary.
[How is it used?
It is outdoors to the extent that it blows in a little.
Was the one you received as per Image?
I think it is as shown in the product photo.
How was your experience with it?
The rear tire is not hidden as shown in the product photo, but it can be hidden if you use your own belts and tie them in an ingenious way.
[Points to note]
I did not put on the Heat Seat because I do not put on the Seat until the Exhaust System etc. cools down.
How did it compare to other products?
The lack of a large open zipper reduces the risk of flooding.
If you want to cover Motorcycle well, you may want to have a Belt of about 2M, which is sold at a homespun store or the like.
View detail
Fits: KAWASAKI W400, HONDA CB1100, HONDA CB1100 typeI, HONDA CB1100 II, HONDA CB1100 EX, HONDA CB1100 BLACK STYLE, HONDA X11, HONDA X11, HONDA CB1000SF, HONDA CB1000SF-T2, HONDA CBR1000RR, HONDA CBX1000, HONDA CBX1000, HONDA GL1000, HONDA CBR929RR, HONDA VFR800, HONDA VFR, HONDA CB750FA, HONDA CB750FZ, HONDA CB750FB
Price suitable
I bought this for my ZEPHYR750 and VTR-TypeLD. the size for VTR was perfect, but the size for ZEPHYR750 is too large for the specified size. I didn't know the model on the box, so I bought one size smaller, realized my mistake, and went back to the store to buy more, but one size smaller may be just right. The heat protection for the exhaust system and engine is also small and not as good as I expected. I will not buy it next time. View detail
Fits: KAWASAKI W400, HONDA CB1100, HONDA CB1100 typeI, HONDA CB1100 II, HONDA CB1100 EX, HONDA CB1100 BLACK STYLE, HONDA X11, HONDA X11, HONDA CB1000SF, HONDA CB1000SF-T2, HONDA CBR1000RR, HONDA CBX1000, HONDA CBX1000, HONDA GL1000, HONDA CBR929RR, HONDA VFR800, HONDA VFR, HONDA CB750FA, HONDA CB750FZ, HONDA CB750FB
Note the size; Rebel is 3L.
We have used them before and the price and texture are as expected.
The Motorcycle Cover compatibility chart on DAYTONA's homepage lists Rebel as size 2L, but the size compatibility chart on the back of the product box lists it as 3L. I thought I bought the 3L size because it is easier for me to wear a large size, but it was not too large, and as a result, it was just right.
Since it is used in a covered bicycle parking area, dust protection is sufficient for functional purposes. "Simple" MODEL.
Size 2L can be used for Rebel, but I think 3L is better for Rebel (MC49) because it is difficult to hang if it is not roomy.
View detail
Fits: SUZUKI Bandid 400 Limited V, SUZUKI Bandid 400VZ, SUZUKI Bandid 400 Limited, SUZUKI Bandit 400, SUZUKI Bandid 400V, SUZUKI Bandit 250VZ, SUZUKI Bandit 250 Limited, SUZUKI Bandit 250, SUZUKI Bandit 250, SUZUKI Bandit 1200, SUZUKI Bandit 250 V, SUZUKI Bandit 1200 S, SUZUKI Goose 250, SUZUKI Goose 350, SUZUKI Inazuma 400, SUZUKI Impulse 400, SUZUKI Impulse 400, SUZUKI Impulse 400, SUZUKI Impulse 400 Type S, SUZUKI TL1000S
This is a standard Red Pad!
I used the Red Pad last time, but since I replaced it with the WaveRotor, it started to wear out faster, so I bought it from Repeat. I bought it at Repeat because it was worn out too fast since I replaced it with WaveRotor. The replacement work is easy if you can remove the caliper because there is a hang to assemble the pad stop spring. View detail
Fits: KAWASAKI 1R, KAWASAKI GPZ900R, KAWASAKI KR-1S, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100 2, KAWASAKI ZRX1100 2, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400, KAWASAKI ZRX400 2, KAWASAKI ZRX400 2, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZX-12R
More than OEM?
I usually use OEM, but this is the first time I'm using OEM. OEM is getting strange wear & rust even after applying CopperGrease. I wish they didn't rust. I will replace the pad when I replace it, as it is consumable. View detail
Fits: SUZUKI BOULE VARD 400, KAWASAKI ZX-14R, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI XN85TURBO, SUZUKI GS650G, SUZUKI GSX-R750SPR, SUZUKI GSX-R750W, SUZUKI GSX-R750R, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX750RR, SUZUKI GSX750R, DUCATI M1200, DUCATI DIAVEL CARBON FL
This is a repeat purchase from an older model.
[How is it used?
I'm using it on my MainMotorcycle XJR1300C, and I'd say the 3L size is about right or a little large.
I chose this size because the normal XJR1300 is 3L size and the old model Black coverStandard was also 3L.
The bicycles are stored in a covered outdoor bicycle parking lot.
Was the one you received as per Image?
I thought the fabric would be thin because it was labeled WRLight. I was expecting it to be thin.
Like the old MODEL, it has a 300 denier thickness, which gives it a solid texture.
In addition, the lining of the old MODEL was White, but the WRLight of the New Model has become Black, and it is a good feeling to increase the feeling of Black further.
How was your experience with it?
The feel of the product is as good as ever, and the front and rear locking holes are divided into Yellow and Red colors.
It is very easy to know which side is the front when you put it on. Also, the drawstring hem is very convenient.
And it's a good point that it has Velcro to hold it together.
In addition, the old model had a separate buckle belt to prevent flapping around the body, and it was necessary to thread a string through it every time.
The new MODEL is sewn into the Cover, and now that it's one piece, there's no hassle here!
[Points to note]
There is nothing special about it, but it is thick to some extent, but if the exhaust system is hot, it will melt, so be careful.
How did it compare to other products?
I really like the black color. The silver color really stands out.
Black is so blinding in the daytime and at night, I'd rather not have it there in the first place!
I can recommend it to anyone who is looking for a good quality product. The quality is also a DAYTONA product, so you can be sure of that.
There are many inexpensive covers available, but in the end, the most satisfying black cover is made by DAYTONA.
View detail
Fits: SUZUKI GSX400R, SUZUKI GSX400S Katana, KAWASAKI ZX-12R, SUZUKI RG250 gamma, SUZUKI WOLF250, SUZUKI Bandid 400 Limited V, SUZUKI Bandid 400 Limited, SUZUKI Bandit 250 Limited, SUZUKI Bandit 400, SUZUKI Bandid 400VZ, SUZUKI Bandit 250VZ, SUZUKI Bandid 400V, SUZUKI Bandit 250 V, SUZUKI Bandit 250, SUZUKI Bandit 250, SUZUKI Bandit 1200, SUZUKI Bandit 1200 S, SUZUKI Goose 350, SUZUKI Goose 250, SUZUKI Impulse 400 Type S
Rear of ZrX1200DAEG
Mounted on the rear of the ZrX1200DAEG
It was a replacement for the OEM, but it is easy to control and durable.
it's recommended
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI Goose 350, SUZUKI Goose 250, SUZUKI Impulse 400 Type S, SUZUKI Impulse 400, SUZUKI Impulse 400, SUZUKI Impulse 400, SUZUKI Inazuma 400, SUZUKI Inazuma 1200, SUZUKI WOLF250, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI SV650 S, SUZUKI SV650, SUZUKI SV400S, SUZUKI SV400, SUZUKI SV400, SUZUKI SV400 S, SUZUKI RGV250 gamma
The GSX250R is only compatible with the 1988 model year.
It was registered as a 2017 model on myMotorcycle, and I made the mistake of jumping from there to buy one with a compatible model.
Only older models are supported. Please check before purchase.
It is not available and I can't lower the rating, so I'm giving it the lowest Large value rating.
View detail