Reviews
Ideal for NAKED's Engine area!
As per the Title, it is ideal for cleaning around the Engine of Naked motorcycle!
I have been driving a GSX1400 motorcycle for 16 years. The front side of the engine is hard to clean because of the oil cooler, exhaust pipe, oil line, and oil filter, and I have half given up on cleaning it.
However, I didn't want to leave it like this, so I was looking for something better and found this.
I purchased this product expecting it to work as well as it looked, but it was even better than it looked!
The size is a little large and the core wire is hard, but that is good!
A 1400cc straight-4 Engine is wide, and being wide means that it takes a certain amount of force to shove Brush into it and scrub it.
LargeSize and hard core were exactly Exactly for my use.
Also, the core Wire is not very thick, so it will properly fit into the gap.
After washing the car using DAYTONA's Shampoo in combination with this, Engine has regained the beauty of its original black paint!
This is highly recommended for those who want to keep Naked motorcycle's Engine appearance beautiful!
View detail
To remove Cowl!
This is an essential item for Cowl removal. It is recommended to apply grease to the joint part for the next time after the cowl is removed. View detail
easy to grasp
The Grip section is thicker for a stable grip. View detail
Reliable Brand
[How is it used?
I purchased this to strip the Liquid Gasket when replacing the Generator cover on the Rokudabo. There were various approvals, but I chose this one because it was made by DAYTONA, a reliable manufacturer.
Was the one you received as per Image?
It was smaller than I expected, but it was usable enough!
How was your experience with it?
As a Scraper, I was able to peel off Liquid Gasket well, so I am glad for now. I think there are other uses for it, so I will continue to use it. I have only used it once, so I don't know how durable it is.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Sturdy as expected.
The clutch is so tight that a cheap nut remover was damaged and could not be turned. As the description says, this one is for removing the clutch, and it did not damage the clutch.
Unfortunately, only 24mm and 30mm are available. We would like to have an intermediate 26mm.
View detail
For disassembling the rear shock (removing the spring seat)...
The product is a tool that allows the Spring Seat, which receives the Spring, to be removed by wrapping the Tie Down Belt around the Spring and then retracting the ShockBody.
It is not easy to use, but it is easier to use than the type that hooks the Gold Hook and shrinks the Spring.
I am afraid that the Gold Hook type might gap the Hook and cause a loud wound on the Spring, and I am afraid that if the Hook comes off while shrinking, it will be nothing more than a joke (in the worst case, the strong Spring will go flying off). However, this product is safe because the Belt is completely circled around the Spring.
It's hard to use, though.
Also, it is inexpensive for this type of Tool.
The price is comparable to mass-market inferior products such as Sto0rt and Astro P0ducts.
Instead, the construction is not much different from the cheapest products of the same type.
But it is good because it can be used properly!
Even a firm spring can be compressed without deformation of the tool when the shock is compressed.
The simple shape of the fork allows it to be used for front forks as well, depending on the ingenuity of the designer.
Shrinking the Spring to loosen the Nut that holds the InnerCartridge ROD in place would normally require a special tool, but with this, it can be done! It can be done! (Though it requires a lot of ingenuity.)
This is an imprementation that is of almost no use to anyone since we normally do not disassemble Rear shock, but it is a Recommendation since it can be used normally.
View detail
For cleaning spoke wheel
Tip Interference Wound Prevention Cap
It goes in between the fine Spoke wheel.
Easy-to-grip Grip
Good tools to do a good job
View detail
Also on Front fork
I couldn't get the YSS Fork Spring to push in by hand, so I tried using it on the Front fork. it press-fits up to the screw threads on the Inner Tube, and from there I could turn it by hand. There may be other uses for this spring. View detail
The tsubaki at the hand and the Cover at the tip are nice.
As expected from DAYTONA, it is well thought out.
There are some areas around the Engine that are quite sharp or Edge standing.
This Brush prevents the bristles from injuring the hand in such areas.
The rubber cover at the end of the brush is designed to prevent damage to the motorcycle parts by the brush.
It prevents
It is a larger size than expected, so it can be used to wash the engine part of the reverse side of NINJA's Exhaust System, etc.
It covers a large area, making it easy to work with.
Brush also has a waist, so I thought it should be used exclusively for Engine, undercarriage, etc.
View detail
Purchased to measure fork oil level
Used only to measure Fork oil level. It is not difficult to handle. View detail
DAYTONA Syringe Kit
About quality and texture - Top quality. The syringe has a durable plastic housing that can be reused many times even when exposed to brake fluid. About the feeling of use - When removing and adding brake fluid from the master cylinder I like to minimise the chance of brake fluid being spilt on my paint work and this syringe and hose kit suits my needs perfectly. Products to buy together - The brake air bleed set from Daytona is perfect to purchase together with this syringe kit so all your brake bleed needs are covered. Difficulty of installation - The syringe kit is easy to assemble from the included items and even easier to use to extract and inject whatever fluid is needed. Cost performance and comparison with other products - With the inclusion of the hose and zip tie I find the syringe kit good value for a product that can be reused multiple times and comparing to the other kits available here on Webike, it's also the best value. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - The included hose is only 15 cm long, so depending in your intended use it might also be worth adding some additional hose to your order. View detail
Items essential to remove the Cowl!
I think this product is an essential item for cowl removal. The resin also prevents the cowl from getting wound, and it is also useful for removing the interior of the car! View detail
Convenient for air venting
Used to bleed air from brake fluid.
The air is released immediately, saving working time.
A Hose for air venting is also included, so you can get to work right away.
View detail
It's a source of reassurance.
The scale position of the chain adjuster is a collection of manufacturing errors of some parts, so I was not sure if I could trust it completely. I even tried to put water thread on the front and rear wheels, but in the end I couldn't figure it out. This method is also unreliable since the rear wheel is offset from the centerline in some models (such as ZrX1200). With this tool, I can at least align the front and rear Sprockets reasonably well. The chain adjustment, which I had always been bothered by, is now done. That's it!" I feel that it has become a stronghold for me. View detail
Just the right amount of Tray
I bought this because everyone uses it during Maintenance and I wanted one too.
It's convenient to use and I can see why everyone uses it.
You don't need to lose Nut or Bolt, and you can use Parts cleaner for cleaning without wasting fluid.
Because it is a little large size, you can put in the large most Gold genus Parts, and because it is Stainless Steel, there is no worry of deterioration, so you can use Chemicals as much as you want.
When I put the parts in the tray, the sound of the tray making a sound like it's being serviced makes me happy when I do maintenance.
If the size is larger than this, it will be difficult to place, so this may be the best.
Also, as you can see in the image I posted, it has helped with sudden Oil leaks from the Machine, making me even more glad I bought it.
If you think there are not many and only one, then this is Recommendation.
View detail
Finger and nail stains
This product is good for removing dirt between fingers and nails from oil, mud, etc.
Chain, the stubborn dirt after cleaning the foil is also removed quite well with this Brush.
It's a good product with two types of brushes, convenient for different uses and affordable.
View detail
Alignment Tool
Used several times so far. Ordered the item for bikes chain adjustments. Colour RED. Quality is fantastic. Fitment is perfect on sprocket. DIY alignment work is easy. Highly recommended item. View detail
scales
I used it to inject Fluid after replacing the Stop lampSwitch on the HarleyEVO FXSTC Rear brake.
First of all, open the cover of the reservoir, and take out all the old Fluid by operating Brake while loosening and tightening Drain.
Cut the Oil Resistant Hose, which has an inner diameter that matches the outside diameter of the Hose supplied with the syringe, and connect it to the drain of the Caliper, and slowly inject a syringe of oil from the drain side.
Be careful not to overflow as Oil comes up to Reserver.
Tighten the Drain and operate the Brake slowly until you get a good response. Then I bleed the air out of the Caliper, but it comes out of the Caliper in the beginning and that's almost the end of it.
It's long in writing, but the process is so fast and easy!
I highly recommend it.
View detail
Used to release air from brake fluid.
The KTM Free ride's rear brake often bites the air and loses its touch. Furthermore, it is very difficult to bleed air, so I use this Syringe to backflow from the Breeder to fill the Fluid. The work is now easier to do. View detail
I'm satisfied
It is used to attach and detach the Dust Seal when cleaning the Front fork
It could have been a slotted screwdriver or a Gold spatula, but it's old We want to avoid any scratches on the vehicle:Plastic adoption
I am very pleased with my purchase I'm glad I bought it
View detail