Reviews
Power management for old cars!
Purchased to manage power supply for old car!
I am impressed with the function-specific split, and I love the fact that I can visually determine the information I need!
View detail
Small Type
The DAYTONASmall Type Air Gauge is an easy-to-use product with good visibility. If I had not been concerned about the price, I would have chosen WITH HOSEKI. View detail
Firmly impression.
Firmly, it looks heavier and sturdier than I imagined.
This type of compact air gauge sometimes interferes with Brake Discs and cannot be used, but this type plugs into 90-degrees, so it can be used somehow.
View detail
Compact and highly visible voltmeter
The Oil Temperature Meter made by DAYTONA was installed, but since there is an opening in the bracket, a voltmeter made by the same manufacturer was installed.
I saw it.
The Size is the same, so it fits together well and looks good.
It functions well as a voltmeter, with a red warning lamp to notify you when the voltage drops below 12?.
Since the voltage increase/decrease is displayed in real time, it may be possible to predict when to replace batteries.
View detail
It fulfills the functionality required for Simple.
I installed it to constantly monitor for voltage drops when electrical troubles were frequently occurring in my vehicle.
I think it is good that the small type has a simple function of displaying voltage, and also notifies the user with a red light when the voltage drops. The simple functionality makes wiring easy.
The Good
Simple and Small Type. The texture is not bad, and depending on how it is installed, it does not give the impression of being attached afterwards or complicated. It is also a good feature that it glows red when the voltage is low. It is helpful to be alerted when you need to be careful without having to check the values in detail.
[Concerned].
The Contrast of the LCD is weak and the viewing angle does not seem very wide. There is no problem when viewing from the front, but it is difficult to check the values when the Layout is viewed from an angle. In my case, I did not need to check the values while driving, but installed it in a slightly secluded place because I thought it would be good if I could check the values when the voltage dropped to the point that it glows red.
I think the printed logo is too large, which is completely a matter of taste, and the simple appearance is somewhat spoiled, so I think the balance would be better if it were a little more modest.
View detail
For BAT charge voltage monitor
I have often heard that the regulator of RC42 is fragile, and since my car has been driven for more than 10 years, I was concerned about the life of the regulator−, so I installed it to monitor its function.
BAT voltage can be checked immediately by turning BAT S/W ON, and this can also be monitored. It is also a good feature that the back light of the product in question turns red when the voltage is low.
After installation, during the operational inspection in the E/G operation state before driving, we were able to confirm that the indicated voltage of the product in question and the voltage indication of the charging voltage of the BAT section measured with the Tester were almost identical, which made us think that the voltage indication could be trusted as well.
In some cases, there was a slight difference in voltage between idling and driving.
I think it is a good piece of equipment because it can monitor the status of the BAT and the power generation system by monitoring the voltage with it. I am also very satisfied with the cost performance.
View detail
Easy-to-read voltmeter
The display screen is large and easy to read. I purchased this product because I thought that if there is an electrical failure, the first thing I would check is the battery. I think it is a good product because I can always check the strength of the battery and it is very clear at a glance. View detail
Small, but useful.
I bought this because of the low price to check the voltage status of Battery.
The installation was able to be done without so much problem, but it was difficult in the installation place of the display part though the thing was small, because it was attached to various things at the time of touring, I tried to stick it to the HandlebarStem part after all.
It is difficult to see while riding due to the poor installation location, but the display is small, but the letters are large and easy to read.
Sometimes it's hard to see depending on the sunlight.
It's a good product, though I'm temporarily removing it now.
View detail
Tire air gauge
Compact and easy to carry.
Best of all, I found the air pressure to be nearly as accurate as the more expensive for RaceGauge.
That's the most Large cut there is. I am satisfied with it.
View detail
The simple is best with the smallest function
The power supply itself is a bacchanal and has a Relay inside.
Connect the Startup Trigger to the Attachment power supply and the connection is complete
No standby power, so no need to worry about the battery
The function is really just to see the voltage and no switches or anything else.
It's easy to get a space for the Small Type.
Back light intensity is sufficient to see well at night.
View detail
It's good to have it.
I introduced it from the memory of being made to cry by Puncture of the Regulator in the previous car, because I wanted to catch the sign. I prefer LCD than LED display.
The values were the same as we measured in Tester beforehand, and the voltage drop at the moment of turning the Cell was also clearly visible, so the measurement interval should be sufficient.
Since the body and Wiring are made separate bodies by coupler connection, it is good that positioning and wiring can be done separately, and the form of connecting them at the end is good. Even when it replaces with the malfunction of the body, the time and effort will be reduced. However, it is a little regrettable that Wiring itself has no tube and is bare, but used Colgate Tube for protection. In addition, since the coupler is Waterproof Specification, the place of placement may be troubled if there is no cowl.
The Large size, being reasonably Compact, allowed us to place it in the delicate gap between the Screen and the Tachometer on top of the meter. This position is also good for reading (Trip meter is much smaller).
View detail
It's easy to see.
The backlight makes it easy to see the LCD screen even at night, and the simple metering system makes it one of the most customizable points around. View detail
As an in-vehicle tool.
I always check the air before driving. So I always put it on the car. The usability may be difficult with normal Valve. I used to use L-shaped Attachment for a while. Now I've changed to horizontal Valve, so it's no problem. View detail
That would be handy
The generator voltage depends on the place of wiring Battery voltage can be selected I am not dissatisfied with the performance because it is a single function of the voltage display only It's a shame it's so hard to cover up View detail
MAJESTYS Voltage Check
MAJESTYS is a Cell starterOnly FI Vehicles without the KICK! I bought the voltmeter because I thought it was absolutely necessary The voltage can be grasped accurately because the digital volt value is always changing
You can ride a Motorcycle
However, the MAJESTYS has a battery in the highest gear and the Fuse box to secure the power supply is a layout such as in the front-most Light cowl, so Wiring's The handling of the battery is very large I wanted to go through the Cowl, but it didn't end up working, and half of the time I was forced to go through the feet of the line is outside the footpeg It was good that I managed to cheat with Colgate Tube of Plating
View detail
Not bad, I guess
The Digital display is easy to see with Large Digital display
Battery directly connected to BatteryQuantity as it is installed to check the voltage of Battery:It's easy wiring with only 2pc and Attachment 1 pc
BodyXyz is not large and I think that it is not troubling for the installation place
The price is … but I think it's a decent product
View detail
Just a voltmeter.
Fix Body with Small insufficient Double-sided Tape. Easy to install just by connecting lines to Battery.. Just a voltmeter. Display is easy to understand, when the voltage goes low Red is displayed and visibility is good even at night. View detail
good
The display is easy to see Compact is good. Easy to install, it was possible to install on a small Space. I thought it was okay to think again if there is something of the same type.
View detail
Voltage one point concentration! Simple function is good in reverse!
A favorite car (V-STROM650) Stator Coil problem can also be said to have a chronic illness.
Just "that day" Because I did not want to wait for it, I wonder if I can do something in advance ...
I also thought of useless resistance, but as long as I could search for signs, "voltmeter" I installed.
I also considered other Multimeters, but this time I will get only the necessary functions.
As the voltage drops below a certain level it will be red.
It seems it will be fun to light up, but it is complicated as it is not in good condition when shining (Lol)
It is a mounting position, but when you install it to the place you wanted to install first,
The angle of the LCD screen is bad and I can not see the display at all ... Transplant to the most visible place.
Although it became an unintentional attachment position, since Large Kimono is Small and design is Simple,
As a result, the installation location was a durable feeling in any sense anywhere Large.
By installing, it will rise about 2 horsepower mentally (Lol)
View detail
Small Career!
Scooter without KICK is afraid of rising Battery, so I tried installing it for insurance. What I was wondering about confirming the manual is that there is no function to memorize the function of the watch and the voltage increase / decrease + Why is the power supply Quantity : 2pc I need it? I think that only ACC can be taken, but I am + Quantity : 2 pc bundled and connected. For now it is working properly WWW
View detail