Reviews
The wide width makes it difficult to merge into the soft Hose!
It is a simple steel hose clip with a single body, and is not a product with any significant features.
However, of the many types of hose clips in the world, the least expensive ones are overwhelmingly those with bent wires.
The hose clip certainly works, but the clip is not good for the hose....
The Clip is wide, so it is overwhelmingly difficult to merge into the hose!
Of course, it is gentle to the Hose, and the knob part is easy to pinch when frequently putting on and taking off, and the pinching part does not tilt, so work time is not wasted.
OEM should also use this shape of hose clip for the Large thing part, but I appreciate that it is cheaper than OEM.
The claws areQuantity:Quantity on the 2pc standing side:Pair (for Left and Right) is connected is also easy to use and GOOD in a sober way.
The surface anti-corrosion treatment is also black colored zinc plating (probably) like OEM, so it is an unquestionable alternative to OEM.
And even if there is a surplus, there is nothing wrong with keeping it on hand.
View detail
For fixing the hose!
CUB I used it because I added a spare tank to my It is inexpensive and stops well. View detail
CUB I put it on the Blowby hose of
CUB I put it on a Blowby hose of The price is cheap and it is a Repeater. View detail
While replacing the Fuel Hose
It's cheap, stops well, and is a Repeater. View detail
To fix theHose
I used it to fix the hose on the CB223S Air cleaner.
The air cleaner is made by DAYTONA and the hose is a cheap Oil Resistant Hose from Homsen.
The inner and outer diameters are different, so it is not a perfect fix, but so far no problem.
View detail
For replacement of Fuel Hose!
I purchased this product when I was replacing my Fuel Hose. It is reasonably priced and easy to use. It was good. I would like to repeat it again. View detail
For Fuel Hose
Used for Fuel Hose.
The tank is firmly fixed and can be easily removed by pinching it with pliers.
This is a product that I am glad I bought sober.
View detail
Is good
The width of the Grip is wide, so it grabs firmly and Clips the Hose.
It is easy to use because it can be removed quickly by grabbing the knob with pliers.
There is no leakage of Fuel line hose and it is safe to use.
View detail
good
The quality is good.
It grips well and there are no leaks.
The tightness was not too tight, but just right.
View detail
For safety and security
Purchased to stop the Fuel Hose from Carburetor Vehicles.
Since I use this car for racing, it was troublesome to connect and disconnect the hose without clip. I chose this one because I regretted that it would lead to a large accident if it leaked because what I was handling was Gasoline.
The tightening is strong and the Pliers make it easy to remove and install for convenience and peace of mind.
We practice hurry up and get it done.
View detail
Choose your size carefully
I was looking for a Hose clip to use for the Hose on my Brake Reservoir tank.
I'm not sure if it's called Size (it's a pain in the ass to measure), so I went on a hunch and bought a φ13mm.
The deciding factor in the purchase
The price was low and the Quantity:1 Set of 2pcs. so I thought it was Exactly for the Hose of the Reserver tank.
The one I'm using now is rusting, so I thought it would be nice to have it painted Black to help prevent any rusting.
[Impressions of using it]
It seems to work fine as a Band. It is a low price but solid.
I was going to use it for the Reservoir Tank Hose on the Rear of my TZr50R, but the upper side is a bit too large, and the lower side is a bit too small... (probably top φ14mm, bottom φ12mm or 11mm)
It seems to be able to use it for the upper side, but because the lower side seems to be severe, I decide to buy it again after measuring that side firmly! (Sweat)
I also had a little trouble because the Pliers I have are cheap 100s and not exquisitely open enough.
I'm not saying it's the fault of this product, just that you should buy good Pliers.
【Review】
I was satisfied with both the ease of use and the texture of the product.
Please measure the size of the clip before buying. (Obviously.)
View detail
I think 13mm is OEMsize.
I used it on my DAYTONA Reservoir Tank Hose!
Size is 13mm
It was ExactlySize.
Abrupt angle will bend
View detail
Okay!
I recently overhauled a separate Master Cylinder, so I bought it to replace all the replaceable parts with new ones.
It's easier to have Pliers, as it's quite tough to do with just your fingers.
View detail
It's neither good nor bad.
I lost the hose clip when I replaced the hose when I did an overhaul of the masterpiece. I bought it because I did.
It was cheaper to buy it at Home Center, but it was a hassle, so I bought it here!
View detail
I think it's good
We wanted something easier to handle than the OEM Hose clip
I rate it highly for making maintenance a little easier and the peace of mind of a wide Clip
View detail
It is safe and secure to have
I use it when removing the tank, first try handling it securely and it stops firmly
If you use Tie Wrap etc., it may come off, but this one is safe to use And relatively Large? So it's easy to use
It is inexpensive and sturdy, and maintenance people should have one of these for safe work I think
In the Plug exchange, for the work of removing the front of the Tank, it is useful to use it occasionally
View detail
A little persistence
GALE SPEED
purchase for Radial Master Cylinder
As a result, I was able to stop it with Exactly
If it's just a Horse clip, you can get it at your local Home Centeretc. for cheap That's Color:There are a lot of Unpainted Clips, and this one, which is painted in black, is a little more particular Purchased
The black thing didn't stand out and I think it fit well
View detail
I was looking for something.
Installation of this Clip
If you narrow the part of the ring with your hand
You can pinch your finger with Hose
Using Radio pliers
If you put your tip in a ring
The work in a narrow place is really easy
For people who decompose Carburetor on a regular basis
There is no loss as I have one
View detail
There is no doubt.
It is reliable DAYTONA product, it is inconspicuous Black color, making is solid and price is also cheap so it is no complaints. It is necessary to choose Size according to the size of Hose, but if you choose by the outer diameter of Hose, it will go away with a slightly tightening feeling. View detail
Stop
When replacing Fuel Hose or cleaning the Carburetor
It is a useful husband (^O^) v
How to use is also very can Tan Why do not you put it in a tool box one?
View detail