Reviews
Thank goodness for special tools
I used to work with an iron saw, but I bought a special tool. The solid handle makes it easy to work with, and prevents the outer surface from getting scratched. View detail
Very convenient
Until now, when replacing the pad, I had to use a large water pump pliers to push back the piston with the dustcloth while removing the pad so that the dustcloth would not wound.
I haven't used it yet because it's not time to replace the pad yet, but it will make the job a lot easier.
I am a little concerned about the durability of the body plate and the grips, which have only one spot weld, and the grips are only available in one color, Black/Blue.
View detail
Ease of use of dedicated Tool
Until now, we used to use a home-made tool, but the number of motorcycles owned in our household increased and it was troublesome to change the settings of the home-made tool according to the vehicle, so we introduced a dedicated tool.
The dedicated Tool is good for easily changing oil level settings.
View detail
Dedicated tools are still easier to use than home-made tools.
I used to use a self-made tool, but now I manage multiple vehicles and it was troublesome to change the oil level for each vehicle, so I purchased the self-made tool. View detail
High or Low? Cheap?
I think the value judgment depends on how often you use it! I used to use a short one, but now I have a long one with a long handle and it is easier to pull and easier to work with, regardless of my body position! View detail
Required for Exhaust SystemJoint spring
Exhaust SystemJoint spring is a must for installation.
Don't be stingy and have one so you can install it without injury.
Recommendation
View detail
Hard Oil is hard.
It is hard to suck up hard Oil. View detail
It's a shortcut.
[How is it used?
Used to replace oil in front fork of TZr250R.
I have changed fork oil several times, but it took me a long time to check the oil level each time, so I bought this to save time.
Was the one you received as per Image?
It was just like the picture.
How was your experience with it?
As is often the case with Yamaha vehicles, the amount of oil to be removed from the inner fork is quite large, since the oil is filled to the top of the inner fork once and then removed to the specified level.
This product is quite slow to suck up Speed. (Piston is heavy) So in that sense, it takes a little time.
However, the work time itself is reduced, so it is worth having one if you frequently perform maintenance.
The scale was also measured by Caliper and was generally correct.
[Points to note]
You should think of a way to secure Fork so that it does not fall over since both hands are occupied.
How did it compare to other products?
I have not used any other products, but I was not sure if I should go with the one-handed guy from DRC.
The DRC seems to have a lower usable oil surface height, so we chose this product just in case.
【Review】
There were no problems with the product itself, and it shortened my work time.
It is not absolutely necessary, so please consult with your Wallet.
View detail
Inexpensive and can be diverted for Brake maintenance
[How is it used?
I purchased this product for use on an old car during a front forkOverhaul.
Was the one you received as per Image?
For the price, Memory was listed and was of higher quality than expected.
How was your experience with it?
I used to maintain the system by diverting my own work, so it has become much easier to maintain.
[Points to note]
The attached Hose is a bit unreliable as it is a Material that seems to stiffen over time.Material:If you replace it with SiliconTube, no problem.
How did it compare to other products?
I have not used other companies' products, but I appreciate the fact that they are available in the $1,000 range.
▼The syringes have the same capacity as the Active ones normally used for Brake maintenance, so they can be diverted for Brake fluid replacement and air removal, although they must be cleaned, so they are a good value.
View detail
Convenient to have
Purchased to change the Fork oil in my Gixxer 250.
If I wanted to do it cheaply, I could have substituted various tools, but I bought this to make sure it was adjusted properly because it is an important part.
Will be replaced at the end of the year!
View detail
undisputed
Necessary and sufficient. Feel?I gave it a 4 because I felt the push/pull of the Syringe was a little tight. However, I thought it was good because it covered everything I needed yesterday. It is much easier than using a syringe. View detail
No problem at all!
[How is it used?
To adjust oil level when changing fork oil
Was the one you received as per Image?
Street Image
How was your experience with it?
Very easy to use
It is made orthodox, so there is nothing weird about it.
[Points to note]
Oil level adjustment is easier with two workers.
How did it compare to other products?
I knew it was a reliable Brand. I think it was a little expensive.
View detail
No damage to the Outer tube
The long contact surface prevents scratching, and the tip of the screwdriver bites between the Outer and Dust Seals, making it easy to remove the Dust Seals. View detail
Hmmm. A little difficult to use…
Purchased mainly to remove the Spring used for the Joint in the Exhaust System.
I remove it every time I change the Oil, so I think it is not easy to use, although it is used infrequently.
The long length of the handle and Hook makes it difficult to make fine adjustments.
It seems durable, so I will use it for a while.
View detail
ForkOH essentials
I used it on the Front forkOH of my Triumph STREET TRIPLE that I use in the Main.
With this, the oil level can be accurately and quickly obtained, and the Fork's OH work can be done quickly.
If you want to do your own OH on Fork, you'll want to buy one of these!
View detail
A necessity for accurate and safe work
This time I used it for a W800 Fork oil change job, and there was nothing to worry about, and the fluid level position was accurate to the scale Quantity.:Set, and just suck it up with Syringe.
Before, it was difficult to check the liquid level using Scaleetc., and it took a lot of time and effort to check the liquid level position again and again.
I have used it about 4 times for oil change and overhaul since I purchased it, and the work is always completed in one shot very smoothly because the fluid level can be adjusted easily.
When using the Syringe to suck out the oil, it is important to do so carefully, keeping close contact with the top surface of the Fork.
Fork oil replacement is safe and reliable with a vertical fixture and this.
If I may say so, the scale may be a little hard to see. I check it many times before pulling it out.
View detail
DAYTONA Fork Oil Level Adjustable Tool
About quality and texture - Top quality. Durable syringe with plastic tubing and the etched markings on the metal pipe gives this tool a premium feel. About the feeling of use - In the past I used stripes of paper and zip ties to help me guage the oil height in the fork legs not that successfully but this tool just does the job so easy and perfectly measures the fork oil height to your selected measurement. Products to buy together - I'd recomment adding a plastic funnel and measuring beaker to your order with this tool as these 3 tools together will make fork oil servicing a breeze. Difficulty of installation - The tool is very easy to fit to the fork leg and use by simply adjusting the metal pipe in its retaining ring and pulling out the excess fork oil using the included syringe. Cost performance and comparison with other products - There are many options of this tool here on Webike and the one from Daytona is on the low end of the price scale but does the job well and so does all the other tools I use from Daytona Garage. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - If you want the best of the best fork oil level adjustable tool Daytona also offer another version with a higher quality airtight syringe for 3 times this price. View detail
Compact
It is a useful tool to have when changing pads.
The Piston can be pushed back without placing an undue burden on the Caliper, allowing it to be used with confidence.
View detail
I want to do this right.
[How is it used?
Used to overhaul the front fork of PCX
Was the one you received as per Image?
As per Image
How was your experience with it?
It came with an instruction manual, which was easy for beginners to adjust the oil level.
View detail
Easy to use
I have never had a proper oil level adjustment tool before, but this time I bought one because it was a good opportunity.
The adjustment was so easy that I felt that all the hard work I had done so far was for nothing.
I realized once again that it is more efficient not to be stingy with tools.
View detail