Reviews
Thank goodness for special tools
I used to work with an iron saw, but I bought a special tool. The solid handle makes it easy to work with, and prevents the outer surface from getting scratched. View detail
Ease of use of dedicated Tool
Until now, we used to use a home-made tool, but the number of motorcycles owned in our household increased and it was troublesome to change the settings of the home-made tool according to the vehicle, so we introduced a dedicated tool.
The dedicated Tool is good for easily changing oil level settings.
View detail
Dedicated tools are still easier to use than home-made tools.
I used to use a self-made tool, but now I manage multiple vehicles and it was troublesome to change the oil level for each vehicle, so I purchased the self-made tool. View detail
High or Low? Cheap?
I think the value judgment depends on how often you use it! I used to use a short one, but now I have a long one with a long handle and it is easier to pull and easier to work with, regardless of my body position! View detail
Required for Exhaust SystemJoint spring
Exhaust SystemJoint spring is a must for installation.
Don't be stingy and have one so you can install it without injury.
Recommendation
View detail
Inexpensive and can be diverted for Brake maintenance
[How is it used?
I purchased this product for use on an old car during a front forkOverhaul.
Was the one you received as per Image?
For the price, Memory was listed and was of higher quality than expected.
How was your experience with it?
I used to maintain the system by diverting my own work, so it has become much easier to maintain.
[Points to note]
The attached Hose is a bit unreliable as it is a Material that seems to stiffen over time.Material:If you replace it with SiliconTube, no problem.
How did it compare to other products?
I have not used other companies' products, but I appreciate the fact that they are available in the $1,000 range.
▼The syringes have the same capacity as the Active ones normally used for Brake maintenance, so they can be diverted for Brake fluid replacement and air removal, although they must be cleaned, so they are a good value.
View detail
undisputed
Necessary and sufficient. Feel?I gave it a 4 because I felt the push/pull of the Syringe was a little tight. However, I thought it was good because it covered everything I needed yesterday. It is much easier than using a syringe. View detail
No problem at all!
[How is it used?
To adjust oil level when changing fork oil
Was the one you received as per Image?
Street Image
How was your experience with it?
Very easy to use
It is made orthodox, so there is nothing weird about it.
[Points to note]
Oil level adjustment is easier with two workers.
How did it compare to other products?
I knew it was a reliable Brand. I think it was a little expensive.
View detail
No damage to the Outer tube
The long contact surface prevents scratching, and the tip of the screwdriver bites between the Outer and Dust Seals, making it easy to remove the Dust Seals. View detail
DAYTONA Fork Oil Level Adjustable Tool
About quality and texture - Top quality. Durable syringe with plastic tubing and the etched markings on the metal pipe gives this tool a premium feel. About the feeling of use - In the past I used stripes of paper and zip ties to help me guage the oil height in the fork legs not that successfully but this tool just does the job so easy and perfectly measures the fork oil height to your selected measurement. Products to buy together - I'd recomment adding a plastic funnel and measuring beaker to your order with this tool as these 3 tools together will make fork oil servicing a breeze. Difficulty of installation - The tool is very easy to fit to the fork leg and use by simply adjusting the metal pipe in its retaining ring and pulling out the excess fork oil using the included syringe. Cost performance and comparison with other products - There are many options of this tool here on Webike and the one from Daytona is on the low end of the price scale but does the job well and so does all the other tools I use from Daytona Garage. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - If you want the best of the best fork oil level adjustable tool Daytona also offer another version with a higher quality airtight syringe for 3 times this price. View detail
Compact
It is a useful tool to have when changing pads.
The Piston can be pushed back without placing an undue burden on the Caliper, allowing it to be used with confidence.
View detail
Easy to use
I have never had a proper oil level adjustment tool before, but this time I bought one because it was a good opportunity.
The adjustment was so easy that I felt that all the hard work I had done so far was for nothing.
I realized once again that it is more efficient not to be stingy with tools.
View detail
Easy to use
The instruction manual is easy to understand and easy to use even for the first time. The scale is a little difficult to read, but it is engraved, not printed, so it will not disappear after repeated use. View detail
It's a lot faster to work with.
Purchased for a Caliper replacement.
I used to use a Syringe to bleed air and change fluids, but it was hard to use.
I found this one that a Motorcycle shop near me was using and bought it.
Like others have said in their imprints, the Tube is hard and it has Habit on it.
I bought about 2m of silicon tube at Home center and installed it.
I managed to do Fluid filling by myself, but I regret that I should have bought a check valve too.
I'm very happy with it, it's very convenient and the work is done quickly.
TIPS I always do about Breeder air intake in other imprints.
If you wrap more seal tape around the screw of the Breeder and stop it in the middle, it will not suck air.
When the work is finished and the Breeder is tightened, ignore the Seal tape and tighten it to the end.
After spraying water to clean, tear off the protruding part of the Seal tape at the end.
While the Bleeder Bolt is wrapped with Seal tape, another Bleeder Bolt can be inserted or
Don't worry about it, Fluid needs to be left flowing or something, but no particular problems so far.
View detail
Front fork oil level adjustment is easy!
I've been matching the oil surface with a RubberTube bought from Homsen and a ruler, but it's still easier to work with a dedicated product.
Straw parts of the Gold genus. I noticed after I bought it that it has a length Memory imprinted on it and is easy to use.
I used the Screw that turns with my finger to adjust the oil surface, so I had to be careful not to tighten it gently because the straw might be deformed.
View detail
Happy with the feel!
I bought it to replace my pad, and it moves smoothly and can be operated with light force.
Until now, Caliper maintenance has been done with Pliers for piston attachment and removal.
This is going to make rubbing out a breeze!
View detail
It's easy to apply force and use
Pulling Spring on Side Stand with a lot of force to hook Spring I bought this product because I needed it
The spring hook I bought before is thin and with Exhaust Spring Level It wasn't a problem, but it was tough on Spring at Side Stand
The spring hook is larger than I expected, and it's very easy to apply force to the location You can use it differently depending on your needs, but if you're not sure, buy this spring hook I'm sure of it
View detail
This tool is only for removing the Dust Seal
This tool is just for removing the Dust Seal from the Fork I used to use the tool for removing the inner lining for cars, but I don't want to use it because it seems to damage the outer surface of the fork was The width of this product is wider than the lining stripping, so it's harder to get Wound on, and the Dust Seal is quicker It can be removed Easy to use Convenient to refuel the oil seal inside View detail
It is convenient and good.
I have been using Valve spring compressor until now, try using this tool. Cotter can be easily removed. Surprisingly shortened work time. It is not easy to remove Valve quite privately, but in the case of Overhaul it is a useful tool View detail
Fits: BMW R850RT, BMW R850R, BMW R850R, BMW R1200ST, BMW R1200S, BMW R1150RS, BMW R1150RT, BMW R1150R, BMW R1150GS, BMW R1150GS, BMW R1100S, BMW R1100RS, BMW HP2 SPORT, BMW R1200RT, BMW R1200RS, BMW R1200R, BMW R1200GS, BMW R1200GS Adventure, BMW R900 RT 03-13, BMW HP 04-08
To BMW R1200 GSP plug for Replacement
Since I have an Engine Guard on my GS, I can not install it firmly unless I remove it, so I do not know the real feeling of use until actual plug replacement, but if you insert a handheld Driver etc, I think it's good. Considering the price of OEM's special tools, making is not bad, and COSPA is okay, I feel good. View detail