Reviews
Hard Oil is hard.
It is hard to suck up hard Oil. View detail
ForkOH essentials
I used it on the Front forkOH of my Triumph STREET TRIPLE that I use in the Main.
With this, the oil level can be accurately and quickly obtained, and the Fork's OH work can be done quickly.
If you want to do your own OH on Fork, you'll want to buy one of these!
View detail
Good work.
I was able to work with peace of mind because of the solid construction. View detail
Easy to adjust
It's safe.
It's made by DAYTONA so it's not too bad.
However, With scaleStraw is too long and difficult to handle.
View detail
Fulfill the required functions
No better, no worse.
The Caliper piston will not go in smoothly by hand alone unless it is in very good condition. If you have SST like this, it will be easier to change pad, rub out, overhaul and everything.
This is a coaxial type, and it is stronger than the cheap vise like No Brand product, and Piston did not go into Slant, but it was not so comfortable to use because the hand was hard.
Nevertheless, it meets the necessary functions. The affordable price is a good value for money.
In addition, the No Brand product that I bought in a certain jungle broke with Beijing the moment I applied Torque. Compared to that, it is definitely a high evaluation.
View detail
Durability is difficult
When I was using it to remove the seal from the front fork, there was no problem, but as soon as I used it for the stems, it went down easily. Because I was using it carefully, the usage was not a problem, but there was no persistence. However, there are many risks that can be damaged or scratched if you use the general tools for maintenance of the part where the special tool is used. So, it is recommended to use the appropriate tool even if you put some value on it.
This tool may be best used by people who don't do a lot of maintenance and should be considered disposable.
View detail
The Attachment part of the Breeder looks like it's going to suck air
The Attachment of the Black Rubber to the Breeder has a Fit feeling to it I doubt it I think it would be more reliable to remove it and use it with a tube + thin Tie Wrap
If you have to replace a whole brake line, you can't have this product through the Fluid It was easy to
View detail
Remover≒The price of one refueling run
Front fork maintenance up to now, without removing the Dust Seal It was just a matter of applying grease to the inner tube, so we were able to expand the maintenance and I bought a tool to remove the Dust Seal to try it out
I thought it was made of plastic, but it is made of Gold with Rubber on the handle. The size is the same as a 9.5sqm Ratchet The border between the Outer tube and the Dust Seal can't be removed at all I had to move it up and down to get it off
After I bought it, I realized that the same product name and the same shape was available for about 300 yen less than the Unit It was on sale … (ω ω`)
I have no other use for this tool as it is only for removing the front fork dust seal It is necessary because it can be removed with a slotted screwdriver etc But not For those who can afford the Gold and don't want to damage the Outer tube
View detail
DAYTONA Fork Oil Level Adjustable Tool Power Injector.
After 3 times of used the syringe failed and cannot suck the oil because the rubber inside is not air tight.Its not worth to buy this items.Better buy the cheaper version Daytona fork oil level adjustable tool with normal syringe. View detail
Fits: HONDA monkey, HONDA Monkey R, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Monkey R, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Clutch special tool
When removing SUPER CUB's Clutch, Lock nut has a special shape, so Wrench also required special items. There were also Wrench with different upper and lower Size, but this time I only remove Clutch so I bought Wrench made by DAYTONA which has only one Size
After fixing Clutch with Pulley holder, I could easily turn it by loosening Nut using Lock Nut Wrench. There is only a special tool and meshing with Nut is enough
It will not start without this tool to remove Clutch. Some of them are self-made Wrench, but people who can not buy it obediently
View detail
Fits: HONDA monkey, HONDA Monkey R, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Monkey R, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It was saved. ♪
Spring of GEARShift spindleArm broke, Pulley Holder (Φ6~Φ12) I bought it with ♪
Without this tool, I was very saved because I can not leave other Parts hurt absolutely ♪
View detail
It is easy to use.
When I was doing Byte at the service station I was exchanging four wheels of Brake fluid so I was able to go to Smooth surprisingly. Product itself is cheesy, but easy to use. Since the Adapter could not be installed on the Front side, I connected the transparent Hose directly and exchanged the Fluid.
Although it is a replacement for the second year, because of deterioration, the color was brown and discolored.
View detail
It does not use yet. , however structure are bad solid! Touch carries out a Manufacturer thing truly. After [ some ] are light compared with what was touched by Schopp. Using from now on is pleasure.
It does not use yet.
, however structure are bad solid!
Touch carries out a Manufacturer thing truly.
After [ some ]
are light compared with what was touched by Schopp.
Using from now on is pleasure.
View detail